

The schematic and layout design of fire Alarm system using ki-cad software
- Size
- 61 × 29.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 16
- Pads
- 40
- Tracks, vias
- 100, 8
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 16 Jun 2024
- Updated
- 16 Jun 2024
Overview
FAC is an open-source printed circuit board by skkgokul, from the skkgokul/PCB-Design- repository on GitHub. It is a 2-layer board of 61 × 29.5 mm with 13 parts on 16 nets, routed with 100 tracks and 8 vias.
It is built around the NE555D. Its parts include 2 capacitors, 2 resistors, 2 ICs, 2 diodes and 1 connector.
Main components
1README
README.mdThis is a basic PCB(Printe circuit board) design of Fire alarm cricuit. The software used in this PCB design is ki-cad version 7.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | +12v | Connector_Hirose:Hirose_DF63M-1P-3.96DSA_1x01_P3.96mm_Vertical | J1 |
| 1 | 0.01u | Capacitor_THT:C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | C1 |
| 1 | 100K | Potentiometer_THT:Potentiometer_ACP_CA6-H2,5_Horizontal | RV2 |
| 1 | 100u | Capacitor_THT:CP_Axial_L10.0mm_D4.5mm_P15.00mm_Horizontal | C2 |
| 1 | 22K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | 4.7k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 5.1v 400mW | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | D2 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | LM741 | Package_DIP:DIP-8-16_W7.62mm | U1 |
| 1 | NE555D | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_ACP_CA6-H2,5_Horizontal | RV1 |
| 1 | Thermistor | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | TH1 |
Similar boards
- 2 layers107 × 54 mm

- 2 layers140.7 × 47.4 mm

EG8010 A1
Millisman/EG8010
Collection of designs for the EG8010 (ASIC for single-phase SPWM control H-bridge)
201 parts17MIT - 2 layers175 × 115 mm

Laser Controllerv2 only for pcb test
Andre1Becker/GalvOS
Open-source ESP32-S3 laser show controller — built to replace proprietary OEM controllers in RGB galvo laser projectors
122 parts11GPL-3.0 - 4 layers189.4 × 59.1 mm

- 2 layers95 × 60 mm

- 2 layers39 × 66.5 mm

- 6 layers210 × 119 mm

Claculator Keypad
Robert-Mones/Claculator
A reverse Polish notation calculator with added features such as comparisons, branching, and custom recursive operators taken from the Clac project from the 15-122 course at Carnegie Mellon University.
202 parts5 - 2 layers155 × 30 mm

Questions
How big is the FAC PCB?
It measures 61 × 29.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FAC use?
13 parts, built around the NE555D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FAC KiCad files?
From the skkgokul/PCB-Design- repository on GitHub, at the commit this page was made from: the board is FAC/FAC.kicad_pcb and its schematic FAC/FAC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FAC design in my own project?
Its repository states no licence, so its author keeps all rights: ask skkgokul before reusing the design.