Skip to the content
2 layers28.4 × 37.7 mmMoisture1, the printed circuit board in 3D

YieldFlo is a combine yield and moisture monitoring system that works alongside AgOpenGPS. A Windows desktop app records yield rate, moisture, and GPS position continuously while harvesting, and produces spatial yield…

Size
28.4 × 37.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
25
Pads
71
Tracks, vias
128, 19
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
17 Mar 2026
Updated
1 Nov 2026

Overview

Moisture1 is an open-source printed circuit board by SK21, from the SK21/YieldFlo repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 28.4 × 37.7 mm with 19 parts on 25 nets, routed with 128 tracks and 19 vias.

It is built around the ADS1115IRUGR, PCA9306DCUR and BAV99. Its parts include 8 resistors, 4 capacitors, 3 diodes, 2 ICs and 2 connectors.

Main components

3

README

README.md

YieldFlo

YieldFlo is a combine yield and moisture monitoring system that works alongside AgOpenGPS. A Windows desktop app records yield rate, moisture, and GPS position continuously while harvesting, and produces spatial yield maps and job reports — paired with open-source hardware that mounts on the combine's clean-grain elevator.

How it works

  • YieldFlo module (ESP32 or STM32F1 firmware) reads an optical grain-flow sensor on the clean-grain elevator, an optional capacitance moisture sensor, and an optional RPM sensor, then streams live readings to the PC over WiFi UDP, wired Ethernet UDP, or CAN bus.
  • AgOpenGPS supplies GPS position and section on/off state over UDP on the same network.
  • YieldFlo (PC app) combines both streams in real time, calculates yield, stores every point to a local SQLite database, renders a live color-coded yield map, and generates per-job reports and CSV exports.

Repository layout

FolderContents
YieldFlo/Main Windows Forms application (.NET) — the PC-side app
YieldFloApp/Deployed/runnable build output (exe + resources)
Modules/ESP32/YieldFlo_ESP32Module firmware for ESP32 — WiFi/Ethernet/CAN, web-portal configuration, OTA updates
Modules/STM32F1/YieldFlo_STM32F1CAN-only module firmware for STM32F103 ("Blue Pill") — compile-time settings, no wireless
PCBs/YF1KiCad design for the main module board (sensor conditioning, CAN transceiver, etc.)
PCBs/Moisture1KiCad design for the moisture daughter board (ADS1115 + OEM capacitance sensor interface)
Tools/SensorSimArduino-based signal generator for bench-testing module firmware without a combine
ModuleSimulator/Windows app that emulates a module over the network, for testing the PC app without hardware

Each Modules/ folder has its own README with build instructions, pinouts, and protocol details — see the links above.

Getting started

  1. Extract a release (or build YieldFlo.sln) and run YieldFlo.exe — no installer needed. Requires Windows 10/11 and .NET Framework 4.8.
  2. Flash a module (ESP32 or STM32F1 — see the module READMEs) and wire it to the elevator/moisture sensors.
  3. Run AgOpenGPS on the same PC or network.
  4. In YieldFlo: set units, profile, crop, and header, then start a job.

Full instructions are in the in-app user manual (Help button, or YieldFlo/Help/YieldFlo User Manual.md).

Features

  • Live main-screen gauges: yield rate, moisture, sensor status, area/total/average, work rate
  • Color-coded live yield map (GMap.NET) with heading-up rotation and coverage tracking
  • Profiles, crops, headers, and fields — reusable per-combine/per-crop configuration
  • Two-point yield and moisture calibration workflows
  • Job history with reports and CSV export (RateController-compatible)
  • Imperial and metric units throughout
  • Multi-language UI (English, German, French, Dutch, Polish, Hungarian, Lithuanian, Russian)
  • CAN or WiFi/Ethernet module communication, selectable per install

License

GPL-3.0 — see LICENSE.

Parts

19
QtyValueFootprintReferences
310nfCapacitor_SMD:C_0603_1608MetricC1, C2, C3
31KResistor_SMD:R_0603_1608MetricR1, R2, R3
3BAV99Package_TO_SOT_SMD:SOT-23D1, D2, D3
2217Resistor_SMD:R_0603_1608MetricR7, R8
2341Resistor_SMD:R_0603_1608MetricR4, R5
10.1uFCapacitor_SMD:C_0603_1608MetricC4
1200KResistor_SMD:R_0603_1608MetricR6
1ADS1115IRUGRADS1115IRUGR:IC_ADS1115IRUGRU2
1Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1
1MIKROBUS_MODULE_CONNmikroBUS:MIKROBUS_MODULE_CONNCON2
1PCA9306DCURMyFootprints:PCA9306DCURIC1

More from SK21/YieldFlo

1
  • 2 layers165 × 127 mmYF1, the printed circuit board in 3D

    YF1

    SK21/YieldFlo

    YieldFlo is a combine yield and moisture monitoring system that works alongside AgOpenGPS. A Windows desktop app records yield rate, moisture, and GPS position continuously while harvesting, and produces spatial yield…

    60 parts5GPL-3.0

Similar boards

  • 4 layers120 × 76 mmPanel, the printed circuit board in 3D

    Panel

    vbartusevicius/weather-station

    Open-source rooftop weather and air-quality station with no moving parts (Ø 96 × 235 mm, UV-stabilised ASA): ultrasonic wind, acoustic rain and hail, UV / sunlight / night-sky brightness, temperature, humidity…

    235 parts
  • 6 layers164.4 × 88 mmTVCS Dev, the printed circuit board in 3D

    TVCS Dev

    Mig-M27/Avionics-PCBs

    Este repositório é usado para gerir as versões dos projetos KiCAD do sistema de Avionics da Porto Space Team. Está dividido em 2 secções: 1.

    311 parts
  • 4 layers126 × 90 mmIncubator controller, the printed circuit board in 3D

    Incubator controller

    tanaes/OvoEasy_incubator_controller

    KiCad design for the OvoEasy incubator controller board

    169 parts
  • 2 layers145 × 108 mmRC15, the printed circuit board in 3D

    RC15

    AgOpenGPS-Official/Rate_Control

    93 parts20GPL-3.0
  • 4 layers80 × 35 mmRtcl tp25k usb3, the printed circuit board in 3D

    Rtcl tp25k usb3

    ryuz/rtcl-tp25k-usb3-pcb

    Tang Primer 25K + FT601

    95 parts5
  • 2 layers76 × 76 mmTM13, the printed circuit board in 3D

    TM13

    SK21/TemperatureMonitor

    Temperature monitor for grain bins.

    49 parts5
  • 6 layers50 × 50 mmXmos xu316, the printed circuit board in 3D

    Xmos xu316

    youheng7185/xmos_xu316_cs43131_usb_aud

    uac 2.0 on xmos xu316 with cs43131 audio codec

    93 parts3
  • 4 layers35.1 × 58.3 mmPicoDAC, the printed circuit board in 3D

    PicoDAC

    Person-0/PicoDAC

    A USB-C to 3.5mm HiFi mini DAC

    46 parts2

Questions

How big is the Moisture1 PCB?

It measures 28.4 × 37.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Moisture1 use?

19 parts, built around the ADS1115IRUGR, PCA9306DCUR and BAV99. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Moisture1 KiCad files?

From the SK21/YieldFlo repository on GitHub, at the commit this page was made from: the board is PCBs/Moisture1/Moisture1.kicad_pcb and its schematic PCBs/Moisture1/Moisture1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Moisture1 design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).