
Front rear dual can-2026-11-02 before testpoint swap
johnb302/cmu-embedded
Repo for distributed embedded systems at CMU, 18-449

KiCad design for the OvoEasy incubator controller board
Incubator controller is an open-source printed circuit board by tanaes, from the tanaes/OvoEasy_incubator_controller repository on GitHub. It is a 4-layer board of 126 × 90 mm with 169 parts on 124 nets, routed with 1,010 tracks and 405 vias.
It is built around the 74AHCT1G125SE, ESP32-S3-WROOM-1-N8R2 and ADS1115IDGS, with the ADS1115IRUGR, AP62301WU and USBLC6-2SC6 among its other parts. Its parts include 40 resistors, 34 capacitors, 27 diodes, 15 ICs and 14 connectors. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 23 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C10, C11, C12, C13, C16, C19, C20, C22, C24, C27, C31, C32, C35 +7 |
| 17 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R3, R5, R11, R13, R14, R16, R17, R23, R27, R29, R32, R34, R36, R38, R41 +1 |
| 8 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R4, R6, R9, R19, R21, R25, R30 |
| 7 | RED | LED_SMD:LED_0603_1608Metric | D9, D11, D13, D14, D15, D17, D19 |
| 7 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6, D12 |
| 6 | 47R | Resistor_SMD:R_0603_1608Metric | R7, R10, R20, R22, R26, R31 |
| 6 | DMN3008SFG-7 | Package_SON:Diodes_PowerDI3333-8 | Q1, Q2, Q3, Q4, Q5, Q7 |
| 6 | SM4007PL | Diode_SMD:D_SOD-123 | D8, D10, D16, D18, D20, D21 |
| 4 | 10u | Capacitor_SMD:C_0805_2012Metric | C14, C17, C26, C38 |
| 4 | 22u | Capacitor_SMD:C_0805_2012Metric | C4, C15, C21, C23 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965 | H1, H2, H3, H4 |
| 3 | Conn_01x02 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J11, J12, J14 |
| 3 | GREEN | LED_SMD:LED_0603_1608Metric | D25, D26, D27 |
| 3 | SW_Push | easyeda2kicad:KEY-SMD_4P-L6.0-W6.0-P4.50-LS9.5_H9.5 | SW3, SW4, SW5 |
| 3 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP3, JP4, JP6 |
| 3 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP1, JP2, JP5 |
| 3 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-666 | U1, U6, U7 |
| 2 | 10n | Capacitor_SMD:C_0603_1608Metric | C25, C34 |
| 2 | 18k | Resistor_SMD:R_0603_1608Metric | R15, R39 |
| 2 | 47k | Resistor_SMD:R_0603_1608Metric | R33, R40 |
| 2 | 680R | Resistor_SMD:R_0603_1608Metric | R12, R18 |
| 2 | 74AHCT1G125 | Package_TO_SOT_SMD:SOT-23-5 | U4, U5 |
| 2 | B5819W SL | Diode_SMD:D_SOD-123 | D7, D24 |
| 2 | Conn_01x03 | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J8, J9 |
| 2 | Conn_01x04 | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J6, J13 |
| 1 | 12V | TestPoint:TestPoint_Pad_D1.5mm | TP9 |
| 1 | 12V EXT | TestPoint:TestPoint_Pad_D1.5mm | TP8 |
| 1 | 3.3uH | Inductor_SMD:L_Cenker_CKCS5040 | L1 |
| 1 | 32.768kH / 12.5pF | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 3V3 | TestPoint:TestPoint_Pad_D1.5mm | TP3 |
| 1 | 470k | Resistor_SMD:R_0603_1608Metric | R35 |
| 1 | 470u | Capacitor_SMD:CP_Elec_10x10.5 | C33 |
| 1 | 52.3k | Resistor_SMD:R_0603_1608Metric | R28 |
| 1 | 5V | TestPoint:TestPoint_Pad_D1.5mm | TP5 |
| 1 | 887R | Resistor_SMD:R_0603_1608Metric | R37 |
| 1 | ADC2 | TestPoint:TestPoint_Pad_D1.5mm | TP12 |
| 1 | ADS1115IDGS | Package_SO:TSSOP-10_3x3mm_P0.5mm | U16 |
| 1 | ADS1115IRUGR | easyeda2kicad:X2QFN-10_L2.0-W1.5-P0.50-BL | U8 |
| 1 | AON7403_C5310961 | easyeda2kicad:DFN-8_L3.0-W3.0-P0.65-BL | Q6 |
| 1 | AP62301WU | Package_TO_SOT_SMD:TSOT-23-6 | U13 |
| 1 | AZ1117CH-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U9 |
| 1 | BLUE | LED_SMD:LED_0603_1608Metric | D22 |
| 1 | Battery_Cell | Battery:BatteryHolder_Renata_SMTU2032-LF_1x2032 | BT1 |
| 1 | Board | PCM_kikit:Board | REF1 |
| 1 | Conn_01x03 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J10 |
| 1 | Conn_01x04 | easyeda2kicad:CONN-TH_4P-P3.81_DB2EVC-3.81-4P | J7 |
| 1 | Conn_01x04 | Connector_Phoenix_SPT:PhoenixContact_PTSA | J3 |
| 1 | Conn_01x04_Socket | easyeda2kicad:CONN-TH_4P-P2.50_04JQ-BT | J4 |
| 1 | Conn_01x06 | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J5 |
| 1 | DC007B-2.0 | easyeda2kicad:DC-IN-TH_HX-DC007B-2.5 | DC1 |
| 1 | DS1307Z+ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U11 |
| 1 | ESP32-S3-WROOM-1-N8R2 | easyeda2kicad:WIRELM-SMD_ESP32-S3-WROOM-1U | U3 |
| 1 | I2C SCK | TestPoint:TestPoint_Pad_D1.5mm | TP6 |
| 1 | I2C SDA | TestPoint:TestPoint_Pad_D1.5mm | TP7 |
| 1 | Micro_SD_Card_Det1 | Connector_Card:microSD_SameSaky_MSD4A | J2 |
| 1 | RotaryEncoder_Switch_MP | easyeda2kicad:SW-TH_EC12D1524403 | SW2 |
| 1 | SMAJ14A | Diode_SMD:D_SMA | D23 |
| 1 | SW | TestPoint:TestPoint_Pad_D1.5mm | TP4 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_TS-1088-xR025 | SW1 |
| 1 | TH0 | TestPoint:TestPoint_Pad_D1.5mm | TP10 |
| 1 | TPS259470LRPWR | easyeda2kicad:VQFN-10_L2.0-W2.0-P0.45-TL | U14 |
| 1 | USB_C_Receptacle_USB2.0_14P | easyeda2kicad:USB-C-SMD_HC-GAP-ACF012-1T-1 | J1 |
| 1 | WL 3v3 | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
| 1 | WL 5V | TestPoint:TestPoint_Pad_D1.5mm | TP2 |
| 1 | ~ | breakouts:humidifier type-c inverted breakout | U15 |
| 1 | ~ | breakouts:W5500 Eth Breakout | U12 |
| 1 | ~ | Display:ILI9341_TFT_2.4-NoSD | U2 |
The 168 most common of 169 parts.

johnb302/cmu-embedded
Repo for distributed embedded systems at CMU, 18-449

Mig-M27/Avionics-PCBs
Este repositório é usado para gerir as versões dos projetos KiCAD do sistema de Avionics da Porto Space Team. Está dividido em 2 secções: 1.

vbartusevicius/weather-station
Open-source rooftop weather and air-quality station with no moving parts (Ø 96 × 235 mm, UV-stabilised ASA): ultrasonic wind, acoustic rain and hail, UV / sunlight / night-sky brightness, temperature, humidity…

SK21/YieldFlo
YieldFlo is a combine yield and moisture monitoring system that works alongside AgOpenGPS. A Windows desktop app records yield rate, moisture, and GPS position continuously while harvesting, and produces spatial yield…


bruk-io/pcb-route
A fast autorouter for KiCad boards that, above all, reroutes incrementally: given the previous route, it keeps what an edit left standing and routes again only what the edit disturbed.


h0lad/SolarMeshtasticNode
This is a Meshtastic Solar Node PCB based on the Heltec HT-CT62 and the linear solar charge controller TI BQ25185.
It measures 126 × 90 mm and has 4 copper layers, 1.6 mm thick.
169 parts, built around the 74AHCT1G125SE, ESP32-S3-WROOM-1-N8R2, ADS1115IDGS and ADS1115IRUGR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tanaes/OvoEasy_incubator_controller repository on GitHub, at the commit this page was made from: the board is incubator_controller.kicad_pcb and its schematic humidifier.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask tanaes before reusing the design.