

IoT Enabled Smart RS-485-Modbus Sensor Node
Industrial-grade Modbus RTU communication node featuring full galvanic isolation between the ATmega328P logic block and the RS485 network. Designed in KiCad with an optimized on-board LM2596 switching buck regulator. 100% DRC clean.
- Size
- 80 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 36
- Pads
- 83
- Tracks, vias
- 99, 1
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 22 May 2026
- Updated
- 26 May 2026
Overview
IoT Enabled Smart RS-485-Modbus Sensor Node is an open-source printed circuit board by sitlesh, from the sitlesh/IoT-Enabled-Smart-RS-485-Modbus-Sensor-Node repository on GitHub. It is a 2-layer board of 80 × 50 mm with 24 parts on 36 nets, routed with 99 tracks and 1 via.
It is built around the ATMEGA328P-PU, MAX485ED and LM2596T-5.0. Its parts include 5 resistors, 5 ICs, 2 capacitors, 2 diodes and 2 connectors. It belongs with the interfaces and adapters and home automation and IoT boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATMEGA328P-PU
DIP-28-300mil-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH DIP-28-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)MAX485ED
SOP-8-40℃~+85℃ 1 1 1mA 32 4.75V~5.25V 5Mbps Half-Duplex Transceiver ±8kV SOP-8 RS-485 / RS-422 ICs ROHSHTCRS-485 / RS-422 ICsLM2596T-5.0
TO-220-5-40℃~+125℃@(TJ) 1 150kHz 3A 4.5V~40V 5V 5mA Buck Buck Built-in Fixed No TO-220-5 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
README
README.mdIoT-Enabled-Smart-RS-485-Modbus-Sensor-Node
Industrial-grade Modbus RTU communication node featuring full galvanic isolation between the ATmega328P logic block and the RS485 network. Designed in KiCad with an optimized on-board LM2596 switching buck regulator. 100% DRC clean.
Through-Hole Isolated Modbus Board
An industrial-grade, highly reliable Modbus RTU communication hardware platform designed using KiCad. This board acts as a robust node (Master/Slave) in harsh electrical environments, incorporating comprehensive galvanic isolation between the microcontroller logic block and the external RS485 network to safeguard against high-voltage surges, ground loops, and electromagnetic interference (EMI).
📸 Project Previews
1. 3D Renders
| 3D Render - Front View | 3D Render - Back View |
|---|---|
2. 2D PCB Routing Layout (Layer-by-Layer)
Here is the detailed 2-layer routing layout. You can clearly see the physical separation gap that maintains true galvanic isolation between the two grounds.
| Top Layer Routing (F.Cu - Red) | Bottom Layer Routing (B.Cu - Blue) |
|---|---|
🛠️ Detailed Technical Specifications
1. Core Logic & Processing Block
- Microcontroller: Microchip ATmega328P-PU (28-pin DIP package for easy through-hole assembly/swapping).
- Clock Configuration: External 16 MHz quartz crystal oscillator (
Y1) stabilized by dual 22pF ceramic load capacitors (C3,C4) positioned with minimal trace lengths to mitigate high-frequency parasitic layout loop noise. - In-System Programming: Dedicated breakout pins for standard FTDI/UART flashing and debug interfaces.
2. Galvanic Isolation Architecture (Dual Plane Separation)
To achieve true industrial-grade isolation, the board is split into two completely distinct galvanic zones divided by a physical isolation trench across the PCB layout:
- Logic Zone (Safe Side): Powered by the local regulator system. Houses the ATmega328P, crystal oscillator, and logic-side optocoupler interfaces. Operating on standard
GNDPWRground. - Bus Zone (Isolated Side): Completely isolated from the main logic power supply. Houses the MAX485 transceiver, biased pull-up/pull-down safety networks, and external communication lines. Operating on isolated
GNDDground. - Signal Opto-coupling: Dual high-speed optocouplers (
PC817) handle bidirectional UART data flow ($TX$ and $RX$).U4isolates transmission signals going from the MCU to the transceiver.U3isolates receiving network data going from the transceiver back to the MCU.
3. Power Supply & Regulation Block
- Topology: Step-down switching buck regulator circuit utilizing the LM2596T-5 IC to step down standard industrial 12V/24V DC inputs down to a stable 5V rail.
- Input Filtering & Protection: Reverse polarity protection diode (
D1- 1N4007) paired with a high-capacity polarized input electrolytic smoothing capacitor (Cin1). - Power Loop Optimization: Low-loop-inductance component placement topology linking the input capacitor, switching regulator output pin, fast-recovery Schottky catch diode (
D2- 1N5822), power inductor (L1), and output filtering capacitor (Cout1) linearly to dramatically minimize switching EMI.
4. RS485 Modbus Interface
- Transceiver: Maxim Integrated MAX485E low-power transceiver for RS485 communication.
- Bus Termination: On-board standard $120\Omega$ termination resistor (
R5) bridging the differential $A$ and $B$ communication lines to eliminate signal reflections over long cable distances. - Connectors: Heavy-duty screw terminals (
J1for main DC power input,J2for differential $A/B$ Modbus lines) accommodating industrial wiring configurations.
📐 PCB Layout Design Parameters
- EDA Tool: KiCad 10.0
- Form Factor Dimensions: $80\text{mm} \times 50\text{mm}$
- Layer Count: 2 Layers (Top Layer: Signals & Linear Power Paths / Bottom Layer: Split Solid Ground Planes for optimal shielding).
- Track Routing Guidelines: - Signal Traces:
0.30mmto0.40mmwidth for tight digital density.- High-Current Power Traces:
0.80mmto1.00mmwidth to ensure minimal voltage drops and lower thermal resistance. - Geometry: Strict usage of $45^\circ$ angles to eliminate current crowding and signal distortion.
- High-Current Power Traces:
- Design Rule Verification: 100% DRC (Design Rule Check) compliant with 0 Errors and 0 Warnings.
📁 Repository Directory Structure
This repository contains all the native design assets and manufacturing files required to replicate or modify this project.
🛠️ Core EDA Design Files (KiCad 8.0)
IoT-Enabled Smart RS-485 Modbus Sensor Node.kicad_pro- Master KiCad project management file.IoT-Enabled Smart RS-485 Modbus Sensor Node.kicad_sch- Schematic capture detailing logical nets, MCU connections, power regulation, and RS-485 transceiver circuitry.IoT-Enabled Smart RS-485 Modbus Sensor Node.kicad_pcb- Physical 2-layer PCB layout with optimized component positioning, power loops, and differential pairs.
📦 Manufacturing & Fabrication Outputs
Gerbers/- Directory containing production-ready, compressed industrial manufacturing files (Gerbers and NC Drill data) formatted for immediate submission to fabrication houses (e.g., JLCPCB, PCBWay).
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4 |
| 2 | 22Pf | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C3, C4 |
| 2 | C_Polarized | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | Cin1, Cout1 |
| 2 | PC817 | Package_DIP:DIP-4_W7.62mm | U3, U4 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J1, J2 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 120 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 16 MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 1N5822 | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | D2 |
| 1 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | ATmega328P-P | Package_DIP:DIP-28_W7.62mm | U2 |
| 1 | L | Inductor_THT:L_Radial_D10.0mm_P5.00mm_Fastron_07M | L1 |
| 1 | LM2596T-5 | Package_TO_SOT_THT:TO-220-5_P3.4x3.7mm_StaggerOdd_Lead3.8mm_Vertical | U1 |
| 1 | MAX485E | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
The 20 most common of 24 parts.
Similar boards
- 2 layers76 × 45.2 mm

- 2 layers

Bit v3.0.0
alazifi/baby-incubator-tester
Berikut pasangan versi yang diimplementasikan untuk menghasilkan kinerja alat yang optimal.
40 parts - 2 layers100 × 80 mm

Torqeedo pcb
antoinem01/torqeedo_motor
Arduino sketch to control a Torqeedo electric outboard motor over RS485, with speed control and safety switches
43 partsGPL-3.0 - 2 layers97.8 × 71.1 mm

Basic Clock
oli4wolf/Split-Flap-Display
Documentation for the Split-Flap-Display project with the apprentice
38 partsGPL-3.0 - 2 layers103.3 × 63.7 mm

- 2 layers138.4 × 91.4 mm

STM32 MegaBlaster
AidanHockey5/STM32_VGM_Player_YM2612_SN76489
A Sega Genesis music player based off of the STM32 BluePill board and real YM2612+SN76489 sound chips.
96 parts117AGPL-3.0 - 2 layers112.6 × 85.4 mm

- 2 layers96.9 × 110.7 mm

Questions
How big is the IoT Enabled Smart RS-485-Modbus Sensor Node PCB?
It measures 80 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the IoT Enabled Smart RS-485-Modbus Sensor Node use?
24 parts, built around the ATMEGA328P-PU, MAX485ED and LM2596T-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the IoT Enabled Smart RS-485-Modbus Sensor Node KiCad files?
From the sitlesh/IoT-Enabled-Smart-RS-485-Modbus-Sensor-Node repository on GitHub, at the commit this page was made from: the board is IoT-Enabled Smart RS-485 Modbus Sensor Node.kicad_pcb and its schematic IoT-Enabled Smart RS-485 Modbus Sensor Node.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the IoT Enabled Smart RS-485-Modbus Sensor Node design in my own project?
Its repository states no licence, so its author keeps all rights: ask sitlesh before reusing the design.