Skip to the content
2 layers80 × 50 mmAtmega328p DevBoard Hardware, the printed circuit board in 3D

Atmega328p DevBoard Hardware

singharyan2001/hw-Atmega328p-DevBoard

This Repository tracks the development of Atmega328p MCU based development board design, which is designed for learning end to end pcb designing via KiCad Software.

Size
80 × 50 mm
Copper layers
2
Thickness
1.6 mm
Parts
58
Nets
54
Pads
195
Tracks, vias
378, 196
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
9 Jun 2026
Updated
29 Jul 2026

Overview

Atmega328p DevBoard Hardware is an open-source printed circuit board by singharyan2001, from the singharyan2001/hw-Atmega328p-DevBoard repository on GitHub. It is a 2-layer board of 80 × 50 mm with 58 parts on 54 nets, routed with 378 tracks and 196 vias.

It is built around the ATMEGA328P-AU, CD4511BE and L293D, with the L7805 among its other parts. Its parts include 19 capacitors, 19 resistors, 4 ICs, 4 connectors and 3 diodes. It belongs with the microcontroller boards boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

4

Parts

58
QtyValueFootprintReferences
110.1ufCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC2, C4, C5, C6, C7, C9, C12, C15, C17, C18, C19
71KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR10, R11, R12, R13, R19, R20, R21
7330RResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3, R4, R5, R6, R7, R8, R9
510KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2, R14, R15, R18
4MountingHoleMountingHole:MountingHole_3.2mm_M3_DIN965H1, H2, H3, H4
2100uf, 25VCapacitor_SMD:C_Elec_6.3x7.7C1, C3
210ufCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC13, C16
222pfCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC10, C11
2SW_SPSTButton_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFSSW1, SW2
1100ufCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC14
122ufCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC8
1ATmega328P-APackage_QFP:TQFP-32_7x7mm_P0.8mmU2
1CD4511BEPackage_DIP:DIP-16_W7.62mm_LongPadsU4
1DBG/PROGConnector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_VerticalJ2
1HC49 Crystal-16MHzCrystal:Crystal_HC49-U_VerticalY1
1L293DPackage_DIP:DIP-16_W7.62mmU3
1L7805Package_TO_SOT_SMD:TO-252-2U1
1LED_RGBLED_SMD:LED_RGB_5050-6D3
1MTR1-CONConnector_Phoenix_MC:PhoenixContact_MC_1,5_2-G-3.81_1x02_P3.81mm_HorizontalJ3
1MTR2-CONConnector_Phoenix_MC:PhoenixContact_MC_1,5_2-G-3.81_1x02_P3.81mm_HorizontalJ4
1PWR_INConnector_BarrelJack:BarrelJack_HorizontalJ1
1RLEDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD2
1R_PotPotentiometer_THT:Potentiometer_Bourns_3296W_VerticalRV1
1SC56-21EWA7SegmentDisplay:DIPS1524W75P254L1270H825Q10NDS1
1SS14 (1A,40V)Diode_SMD:D_SMA_HandsolderingD1

Similar boards

  • 2 layers80 × 50 mmCustomised Arduino Uno Layout, the printed circuit board in 3D

    Customised Arduino Uno Layout

    sidhesh1010/Custom-Arduino-Uno-Board

    This project is a custom-designed Arduino Uno compatible PCB developed using KiCad. The design is based on the ATmega328P microcontroller and integrates multiple hardware modules such as motor driver, seven segment…

    58 parts
  • 2 layers79 × 107 mmEurorack spinfx, the printed circuit board in 3D

    Eurorack spinfx

    grappendorf/eurorack-spinfx

    Spin FV-1 based effects module for Eurorack systems

    80 parts16
  • 2 layers100 × 100 mmTimerClock, the printed circuit board in 3D

    TimerClock

    kseebaldt/clock_rtc

    Arduino based etc clock

    33 parts1
  • 2 layers75.5 × 46 mmHelioHeat, the printed circuit board in 3D

    HelioHeat

    E-anae/HelioHeat-PCB

    Cette section présente l'architecture d'un thermomètre autonome fonctionnant à l'aide d'un panneau solaire. L'objectif est de mesurer la température d'un lieu et d'afficher sur des afficheurs 7 segments tout en assurant…

    14 parts
  • 2 layers166.4 × 181.6 mmCalculator ver1, the printed circuit board in 3D

    Calculator ver1

    PhdWizards/4-Bit-Discrete-Transistor-Adder

    The core 4-bit binary adder is implemented entirely using discrete transistor-resistor logic. The resulting 5-bit binary value is converted to BCD using 74HC-series logic and displayed on two 7-segment displays.

    308 parts
  • 2 layers78.4 × 64.8 mmPowerNode2, the printed circuit board in 3D

    PowerNode2

    utahrobotics/Electrical-2019-2020

    67 partsMIT
  • 4 layers62 × 60.8 mmPcbcax, the printed circuit board in 3D

    Pcbcax

    7bwiiza/Robot-creation

    Uni project of a 3D model of a 5dof robot using Solidedge and motor control using KiCAD and MATLAB

    58 parts

Questions

How big is the Atmega328p DevBoard Hardware PCB?

It measures 80 × 50 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Atmega328p DevBoard Hardware use?

58 parts, built around the ATMEGA328P-AU, CD4511BE, L293D and L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Atmega328p DevBoard Hardware KiCad files?

From the singharyan2001/hw-Atmega328p-DevBoard repository on GitHub, at the commit this page was made from: the board is Atmega328p-DevBoard-Hardware.kicad_pcb and its schematic Atmega328p-DevBoard-Hardware.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Atmega328p DevBoard Hardware design in my own project?

Its repository states no licence, so its author keeps all rights: ask singharyan2001 before reusing the design.