Skip to the content
2 layers75.5 × 46 mmHelioHeat, the printed circuit board in 3D

Cette section présente l'architecture d'un thermomètre autonome fonctionnant à l'aide d'un panneau solaire. L'objectif est de mesurer la température d'un lieu et d'afficher sur des afficheurs 7 segments tout en assurant…

Size
75.5 × 46 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
55
Pads
152
Tracks, vias
337, 18
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
16 Apr 2025
Updated
27 Jun 2025

Overview

HelioHeat is an open-source printed circuit board by E-anae, from the E-anae/HelioHeat-PCB repository on GitHub. It is a 2-layer board of 75.5 × 46 mm with 14 parts on 55 nets, routed with 337 tracks and 18 vias.

It is built around the ATTINY85-20PU, CD4511BE and 74HC595. Its parts include 7 ICs, 3 resistors, 3 diodes and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

3

README

README.md

Projet ELEC - PCB

Architecture

Cette section présente l'architecture d'un thermomètre autonome fonctionnant à l'aide d'un panneau solaire. L'objectif est de mesurer la température d'un lieu et d'afficher sur des afficheurs 7 segments tout en assurant une alimentation énergétique durable à l'aide d'une batterie rechargeable.

Composants principaux

Les composants que nous utiliserons sont les suivants :

RéférenceComposantQuantitéRemarques
ATTINY85Microcontrôleur1Gestion des capteurs et de l'affichage
MCP9700AT-E/LTCapteur de température1Mesure de la température
157119S12801Afficheur 7 segments3Affiche numérique de la température
PET Solar panelMini panneau solaire1Recharge la batterie
CD4511Décodeur BCD vers 7 segments3Simplifie le pilottage de l'afficheur
Batterie rechargeable1Alimentation autonome
74HC595Registre à décalage2Sérialisation des données

Schéma fonctionnel

  1. Le panneau solaire charge la batterie via un circuit de gestion de charge.
  2. La batterie alimente le microcontrôleur et les afficheurs 7 segments.
  3. Le microcontrôleur lit la température via le capteur et affiche les valeurs sur les afficheurs 7 segments.

Le schéma fonctionnel est présent dans le document documents/schema.pdf.

Ce projet permettra de développer une solution autonome et durable pour la mesure de la température. La conception d'une carte PCB optimisera l'intégration des composants et la gestion énergétique.

Fonction de transfert du capteur de température

La fonction de transfert du capteur de température est explicitée dans la partie 4 (Applications information) de la fiche de donnée du capteur de température (documents/thermal_sensor_datasheet.pdf).

Cette dernière nous informe que

$$ V_{OUT} = T_C \times T_A + V_{0°C} $$

avec $V_{OUT}$ la tension de sortie du capteur, $T_C$ le coefficient de température, $T_A$ la température ambiante et $V_{0°C}$ la tension de sortie du capteur à 0°C.

On a alors,

$$ \begin{align*} V_{OUT} &= T_C \times T_A + V_{0°C} \ V_{OUT} - V_{0°C} &= T_C \times T_A \ T_A &= \frac{V_{OUT} - V_{0°C}}{T_C} \end{align*} $$

avec $V_{0°C} = 500 V$ et $T_C = 10.0 V$.

Parts

14
QtyValueFootprintReferences
3220Resistor_SMD:R_0201_0603MetricR1, R2, R3
3CD4511BECD4511BE:DIP794W45P254L1969H508Q16U2, U3, U4
3WL-T7DS_0.39INCH_COMMON-ANODEWL-T7DS_0.39INCH_COMMON-ANODE:WL-T7DS_0.39INCHD1, D2, D3
274HC59574HC595:SO16U5, U6
1ATtiny85-20PPackage_DIP:DIP-8_W7.62mmU1
1MCP9700Ax-ELTPackage_TO_SOT_SMD:SOT-353_SC-70-5U7
1USB_B_MicroConnector_USB:USB_Micro-B_Amphenol_10103594-0001LF_HorizontalJ1

Similar boards

  • 2 layers79 × 107 mmEurorack spinfx, the printed circuit board in 3D

    Eurorack spinfx

    grappendorf/eurorack-spinfx

    Spin FV-1 based effects module for Eurorack systems

    80 parts16
  • 2 layers100 × 100 mmTimerClock, the printed circuit board in 3D

    TimerClock

    kseebaldt/clock_rtc

    Arduino based etc clock

    33 parts1
  • 2 layers166.4 × 181.6 mmCalculator ver1, the printed circuit board in 3D

    Calculator ver1

    PhdWizards/4-Bit-Discrete-Transistor-Adder

    The core 4-bit binary adder is implemented entirely using discrete transistor-resistor logic. The resulting 5-bit binary value is converted to BCD using 74HC-series logic and displayed on two 7-segment displays.

    308 parts
  • 2 layers80 × 50 mmCustomised Arduino Uno Layout, the printed circuit board in 3D

    Customised Arduino Uno Layout

    sidhesh1010/Custom-Arduino-Uno-Board

    This project is a custom-designed Arduino Uno compatible PCB developed using KiCad. The design is based on the ATmega328P microcontroller and integrates multiple hardware modules such as motor driver, seven segment…

    58 parts
  • 2 layers80 × 50 mmAtmega328p DevBoard Hardware, the printed circuit board in 3D

    Atmega328p DevBoard Hardware

    singharyan2001/hw-Atmega328p-DevBoard

    This Repository tracks the development of Atmega328p MCU based development board design, which is designed for learning end to end pcb designing via KiCad Software.

    58 parts
  • 2 layers78.4 × 64.8 mmPowerNode2, the printed circuit board in 3D

    PowerNode2

    utahrobotics/Electrical-2019-2020

    67 partsMIT
  • 2 layers72.2 × 53.6 mmLow cost robotics, the printed circuit board in 3D

    Low cost robotics

    gabs911/low_cost_robotics

    Low cost robotics platform for STEM programs.

    19 parts2MIT

Questions

How big is the HelioHeat PCB?

It measures 75.5 × 46 mm and has 2 copper layers, 1.6 mm thick.

What parts does the HelioHeat use?

14 parts, built around the ATTINY85-20PU, CD4511BE and 74HC595. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the HelioHeat KiCad files?

From the E-anae/HelioHeat-PCB repository on GitHub, at the commit this page was made from: the board is HelioHeat/HelioHeat.kicad_pcb and its schematic HelioHeat/HelioHeat.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the HelioHeat design in my own project?

Its repository states no licence, so its author keeps all rights: ask E-anae before reusing the design.