Skip to the content
2 layers78.4 × 64.8 mmPowerNode2, the printed circuit board in 3D
Size
78.4 × 64.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
67
Nets
83
Pads
207
Tracks, vias
612, 46
Pours
7
Routed
Yes
KiCad
KiCad 5 (file 20200119)
Created
1 Oct 2019
Updated
5 Mar 2022

Overview

PowerNode2 is an open-source printed circuit board by utahrobotics, from the utahrobotics/Electrical-2019-2020 repository on GitHub, published under the MIT licence. It is a 2-layer board of 78.4 × 64.8 mm with 67 parts on 83 nets, routed with 612 tracks and 46 vias.

It is built around the ATTINY84-20PU, CD4511BE and 74HC595N. Its parts include 33 resistors, 6 capacitors, 4 ICs, 2 diodes and 2 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

3

Parts

67
QtyValueFootprintReferences
19220Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolderR4, R5, R6, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R27, R30 +3
1210kResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR1, R21, R22, R23, R24, R25, R26, R28, R29, R31, R32, R33
92,54_0,9Connector_Wire:SolderWirePad_1x01_Drill1mmBL*1, BL*2, DP1, LE*1, LE*2, LT*1, LT*2, PB2, QH*1
50.1uFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC2, C3, C4, C6, C7
4WIREPAD4,16O1,6Connector_Wire:SolderWirePad_1x01_Drill1.5mmGNDHIIN1, GNDHIOUT1, VHIIN1, VHIOUT1
3LED5MMLED_THT:LED_D5.0mm5V1, PWRLED1, VOLT1
22,15_1,0Connector_Wire:SolderWirePad_1x01_Drill1mmGND1, GND2
2CD4511BPackage_DIP:DIP-16_W7.62mm_LongPadsIC1, IC7
2LTS-4301PDisplay_7Segment:Sx39-1xxxxxLED1, LED2
11nFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC1
143kResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR2
174HC595NPackage_DIP:DIP-16_W7.62mm_LongPadsIC5
1ACS712xLCTR-30APackage_SO:SOIC-8_3.9x4.9mm_P1.27mmIC4
1ATtiny84-20PUPackage_DIP:DIP-14_W7.62mmU$1
1SW_DPDT_x2OSx02011MS2Qx1:OS202011MS2Qx1S2
1SW_SPDTOSx02011MS2Qx1:OS102011MS2Qx1S1
1TRIM_US-B25PPotentiometer_THT:Potentiometer_Vishay_T73YP_VerticalR3
1W237-4PowerNode2:W237-4INOUT1

More from utahrobotics/Electrical-2019-2020

1

Similar boards

  • 2 layers79 × 107 mmEurorack spinfx, the printed circuit board in 3D

    Eurorack spinfx

    grappendorf/eurorack-spinfx

    Spin FV-1 based effects module for Eurorack systems

    80 parts16
  • 2 layers100 × 100 mmTimerClock, the printed circuit board in 3D

    TimerClock

    kseebaldt/clock_rtc

    Arduino based etc clock

    33 parts1
  • 2 layers75.5 × 46 mmHelioHeat, the printed circuit board in 3D

    HelioHeat

    E-anae/HelioHeat-PCB

    Cette section présente l'architecture d'un thermomètre autonome fonctionnant à l'aide d'un panneau solaire. L'objectif est de mesurer la température d'un lieu et d'afficher sur des afficheurs 7 segments tout en assurant…

    14 parts
  • 2 layers166.4 × 181.6 mmCalculator ver1, the printed circuit board in 3D

    Calculator ver1

    PhdWizards/4-Bit-Discrete-Transistor-Adder

    The core 4-bit binary adder is implemented entirely using discrete transistor-resistor logic. The resulting 5-bit binary value is converted to BCD using 74HC-series logic and displayed on two 7-segment displays.

    308 parts
  • 2 layers80 × 50 mmCustomised Arduino Uno Layout, the printed circuit board in 3D

    Customised Arduino Uno Layout

    sidhesh1010/Custom-Arduino-Uno-Board

    This project is a custom-designed Arduino Uno compatible PCB developed using KiCad. The design is based on the ATmega328P microcontroller and integrates multiple hardware modules such as motor driver, seven segment…

    58 parts
  • 2 layers80 × 50 mmAtmega328p DevBoard Hardware, the printed circuit board in 3D

    Atmega328p DevBoard Hardware

    singharyan2001/hw-Atmega328p-DevBoard

    This Repository tracks the development of Atmega328p MCU based development board design, which is designed for learning end to end pcb designing via KiCad Software.

    58 parts
  • 4 layers130 × 131.3 mmShuffleboard, the printed circuit board in 3D

    Shuffleboard

    anhvuknguyen/Shuffleboard

    Intro to Embedded Systems Final Project

    72 parts

Questions

How big is the PowerNode2 PCB?

It measures 78.4 × 64.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PowerNode2 use?

67 parts, built around the ATTINY84-20PU, CD4511BE and 74HC595N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PowerNode2 KiCad files?

From the utahrobotics/Electrical-2019-2020 repository on GitHub, at the commit this page was made from: the board is PowerNode/Power Node V3.0/PowerNode2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the PowerNode2 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).