

Low cost robotics
Low cost robotics platform for STEM programs.
- Size
- 72.2 × 53.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 27
- Pads
- 86
- Tracks, vias
- 225, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 16 May 2021
- Updated
- 16 May 2021
Overview
Low cost robotics is an open-source printed circuit board by gabs911, from the gabs911/low_cost_robotics repository on GitHub, published under the MIT licence. It is a 2-layer board of 72.2 × 53.6 mm with 19 parts on 27 nets, routed with 225 tracks and 0 vias.
It is built around the ATTINY85-20PU, L293D and 74HC595, with the L7805 among its other parts. Its parts include 4 ICs, 4 connectors, 3 diodes, 2 capacitors and 2 resistors. It belongs with the robots and motor control boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
4ATTINY85-20PU
PDIP-8-40℃~+85℃ 10bit 2.7V~5.5V 20MHz 512Byte 512Byte 6 8 Bit 8KB AVR Built-in FLASH PDIP-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)L293D
DIP-16-40℃~+150℃ 1.2A 2 4.5V~36V 4mA 600mA DIP-16 Brushed DC Motor Drivers ROHSSTMicroelectronicsStepper Motor Driver74HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift RegistersL7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x03_Female | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | A1, A2, S1, S2 |
| 2 | 66.5 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 2 | Conn_01x02_Female | TB007-508-02BE:CUI_TB007-508-02BE | J4, J7 |
| 2 | D_Zener | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D2, D3 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D7.5mm_P2.50mm | C1 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D7.5mm_P2.50mm | C2 |
| 1 | 1N5819 | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D1 |
| 1 | 74HC595 | Package_DIP:DIP-16_W7.62mm | U3 |
| 1 | ATtiny85-20PU | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | L293D | Package_DIP:DIP-16_W7.62mm | U4 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | Screw_Terminal_01x02 | TB007-508-02BE:CUI_TB007-508-02BE | J1 |
| 1 | USB_B_Mini | Connector_USB:USB_Mini-B_Lumberg_2486_01_Horizontal | J2 |
Similar boards
- 2 layers43.8 × 158.8 mm

- 2 layers100 × 100 mm

Flipdot H Bridge
comakingspace/FlipDotDisplay
They were bought at the Makerfaire Hannover 2016.
76 parts3 - 2 layers75.7 × 59.4 mm

- 2 layers55 × 106 mm

- 2 layers

Full Circuit
EthanSousaProjects/CBR_Custom_Cluster
A custom cluster design for my CBR 125RW6 (2006 carb model) to replace the old large mechanical cluster with a smaller simpler design.
76 partsGPL-3.0 - 2 layers85.6 × 54 mm

Magnetkarte
osmocom/osmocom-analog
Software Implementation of analog cellular telephony systems like NMT, TACS, IMTS, A/B/C-Netz; mirror of https://gitea.osmocom.org/cellular-infrastructure/osmocom-analog
10 parts32GPL-3.0 - 2 layers76.2 × 114.3 mm

- 2 layers90 × 55 mm

Questions
How big is the Low cost robotics PCB?
It measures 72.2 × 53.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Low cost robotics use?
19 parts, built around the ATTINY85-20PU, L293D, 74HC595 and L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Low cost robotics KiCad files?
From the gabs911/low_cost_robotics repository on GitHub, at the commit this page was made from: the board is low_cost_robotics/low_cost_robotics.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Low cost robotics design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).