2 layers58 × 110 mm
2 layers58 × 110 mm
Vco ui
shmoergh/moduleur222Fully analog DIY-friendly modular synth
- Size
- 58 × 110 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 43
- Pads
- 112
- Tracks, vias
- 254, 14
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 1 Jun 2025
- Updated
- 27 Oct 2026
Overview
Vco ui is an open-source printed circuit board by shmoergh, from the shmoergh/moduleur repository on GitHub. It is a 2-layer board of 58 × 110 mm with 40 parts on 43 nets, routed with 254 tracks and 14 vias.
Its parts include 8 resistors, 6 connectors and 1 IC. It belongs with the audio and music boards of this library.
README
modules/08-default-patch/README.mdHog Moduleur / Default Patch
An optional passive PCB which connects the modules of the Shmøergh Moduleur. This essentially creates a default patch which makes the Moduleur playable without patch cables.
How to Build
Module specific instructions
🐛 3D model bug in schematics
The current version of the 3D model has two bugs:
- It incorrectly uses dual row headers. Single row, long pin headers should be used on the BACK side of the PCB so that it can connect to the UI board through the holes on the Core board.
- The side of the ADSR+VCA1, ADSR+VCA2 and UTILS pin headers are wrong. All pin headers should be soldered on the BACK side of the PCB.
License
Open source licensed under CC BY-NC 4.0.
Feel free to fork, build, and tweak.
Latest module version
v1.0
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | LOGO | Shmoergh_Logo:Gyeszno | G***, G***, G***, G***, G***, G***, G***, G*** |
| 6 | PJ398SM | Shmoergh_Custom_Footprints:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J_CV1, J_EXTRA_OUT1, J_FM1, J_OUT1, J_PWM1, J_SYNC1 |
| 5 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4, H5 |
| 3 | 100k | Shmoergh_Custom_Footprints:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R6 |
| 3 | 100k | Shmoergh_Custom_Footprints:Potentiometer_Bourns_Single-PTV09A | RV_FINE1, RV_PWM1, RV_TUNE1 |
| 2 | 220k | Shmoergh_Custom_Footprints:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7, R8 |
| 2 | 510k | Shmoergh_Custom_Footprints:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R5 |
| 2 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | JP2, JP3 |
| 1 | 0203 | Shmoergh_Custom_Footprints:SR1712-0203 | U1 |
| 1 | 130k | Shmoergh_Custom_Footprints:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | Conn_01x02 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J4 |
| 1 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J1 |
| 1 | Conn_01x07 | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J6 |
| 1 | Conn_02x02_Counter_Clockwise | Connector_PinSocket_2.54mm:PinSocket_2x02_P2.54mm_Vertical | J5 |
| 1 | Conn_02x03_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | J3 |
| 1 | Conn_02x05_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical | J2 |
| 1 | Jumper_3_Open | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | JP1 |
Questions
How big is the Vco ui PCB?
It measures 58 × 110 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Vco ui use?
40 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Vco ui KiCad files?
From the shmoergh/moduleur repository on GitHub, at the commit this page was made from: the board is modules/02-vco/electronics/ui/vco-ui.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Vco ui design in my own project?
Its repository states no licence, so its author keeps all rights: ask shmoergh before reusing the design.
More from shmoergh/moduleur
12- 2 layers60.5 × 110 mm
- 2 layers58 × 65 mm
- 2 layers58 × 65 mm
- 2 layers58 × 65 mm
- 2 layers58 × 65 mm
- 2 layers58 × 110 mm
- 2 layers58 × 110 mm
- 2 layers58 × 110 mm
- 2 layers58 × 110 mm
- 2 layers250 × 32 mm
- 2 layers58 × 110 mm
Similar boards
- 2 layers139.7 × 73.7 mm
- 2 layers149.4 × 177.4 mm
Lightsculpture
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
40 parts915 - 2 layers150 × 50 mm
EleLab v2 Bus150
Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
40 parts531GPL-3.0 - 2 layers66.4 × 48.1 mm
Raspberry
Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!
40 parts456 - 2 layers44 × 44 mm
- 2 layers90.8 × 53.3 mm
- 2 layers59.6 × 109.5 mm
Drop
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
40 parts410 - 2 layers123.8 × 73.5 mm
