

Adsr vca core
Fully analog DIY-friendly modular synth
- Size
- 58 × 65 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 68
- Nets
- 46
- Pads
- 173
- Tracks, vias
- 443, 378
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 1 Jun 2025
- Updated
- 27 Oct 2026
Overview
Adsr vca core is an open-source printed circuit board by shmoergh, from the shmoergh/moduleur repository on GitHub. It is a 2-layer board of 58 × 65 mm with 68 parts on 46 nets, routed with 443 tracks and 378 vias.
It is built around the LM324, TL072 and BC847BS, with the BC857 among its other parts. Its parts include 27 resistors, 10 capacitors, 7 connectors, 5 diodes and 2 ICs. It belongs with the audio and music boards of this library.
Main components
4LM324
SOP-14-1.5V~10V 0℃~+70℃ 24V 250nA 3V~20V 4 40mA 50nA 700uA 7mV 80dB SOP-14 Operational Amplifier ROHSHXY MOSFETOperational AmplifierTL072
SOP-8-18V~18V 0℃~+70℃ 1.4mA 1.5nA 10V/us 10mV 2 2.5nA 3MHz 85dB SOP-8 Operational Amplifier ROHSGcoreOperational AmplifierBC847BS
SOT-363Bipolar (BJT)hongjiachengBC857
SOT-231 PNP 100MHz 100mA 15nA 200mW 45V 5V 650mV 800 PNP SOT-23 Bipolar (BJT) ROHSSTMicroelectronicsBipolar (BJT)
README
modules/08-default-patch/README.mdHog Moduleur / Default Patch
An optional passive PCB which connects the modules of the Shmøergh Moduleur. This essentially creates a default patch which makes the Moduleur playable without patch cables.
How to Build
Module specific instructions
🐛 3D model bug in schematics
The current version of the 3D model has two bugs:
- It incorrectly uses dual row headers. Single row, long pin headers should be used on the BACK side of the PCB so that it can connect to the UI board through the holes on the Core board.
- The side of the ADSR+VCA1, ADSR+VCA2 and UTILS pin headers are wrong. All pin headers should be soldered on the BACK side of the PCB.
License
Open source licensed under CC BY-NC 4.0.
Feel free to fork, build, and tweak.
Latest module version
v1.0
Parts
68| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | Resistor_SMD:R_0603_1608Metric | R10, R12, R23, R25, R26 |
| 5 | 1k | Resistor_SMD:R_0603_1608Metric | R2, R4, R9, R15, R17 |
| 5 | LOGO | Shmoergh_Logo:Gyeszno | G***, G***, G***, G***, G*** |
| 4 | 100k | Resistor_SMD:R_0603_1608Metric | R8, R18, R22, R24 |
| 4 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C5, C6 |
| 4 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J2, J3, J5, J8 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 1M | Resistor_SMD:R_0603_1608Metric | R5, R6, R7 |
| 3 | 1N4148 | Diode_SMD:D_SOD-123 | D1, D2, D3 |
| 2 | 100k | Potentiometer_THT:Potentiometer_ACP_CA6-H2,5_Horizontal | RV_OUT_GAIN1, RV_VCA_BIAS1 |
| 2 | 100u | Capacitor_SMD:CP_Elec_6.3x7.7 | C9, C10 |
| 2 | 1N5817 | Diode_SMD:D_SOD-323 | D4, D5 |
| 2 | 470k | Resistor_SMD:R_0603_1608Metric | R27, R28 |
| 2 | 47k | Resistor_SMD:R_0603_1608Metric | R3, R14 |
| 2 | 47p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C8 |
| 1 | 10k | Potentiometer_THT:Potentiometer_ACP_CA6-H2,5_Horizontal | RV_COMP1 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 10u | Capacitor_SMD:CP_Elec_5x5.4 | C4 |
| 1 | 15k | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 200k | Resistor_SMD:R_0603_1608Metric | R29 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 22k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 33k | Resistor_SMD:R_0603_1608Metric | R21 |
| 1 | 4.7k | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | BC847BS | Shmoergh_Custom_Footprints:SOT-363_SC-70-6 | Q3 |
| 1 | BC857 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | Conn_01x06 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J4 |
| 1 | Conn_02x05_Odd_Even | Connector_IDC:IDC-Header_2x05_P2.54mm_Horizontal | J7 |
| 1 | LM324 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | TL072 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
The 65 most common of 68 parts.
More from shmoergh/moduleur
12- 2 layers58 × 110 mm

- 2 layers60.5 × 110 mm

- 2 layers58 × 65 mm

- 2 layers58 × 65 mm

- 2 layers58 × 65 mm

- 2 layers58 × 110 mm

- 2 layers58 × 110 mm

- 2 layers58 × 110 mm

- 2 layers58 × 110 mm

- 2 layers250 × 32 mm

- 2 layers58 × 110 mm

- 2 layers58 × 110 mm

Similar boards
- 4 layers100 × 100 mm

TouchSynth
cpldcpu/TouchSynth
Analog Monophonic Synthesizer with a touch keyboard. Controller by CH32V00x
246 partsMIT - 2 layers215 × 100 mm

- 2 layers70 × 100 mm

- 2 layers256.5 × 172.9 mm

- 2 layers26.1 × 15 mm

- 2 layers200 × 100 mm

Polykit x monosynth
polykit/polykit-x-monosynth
The Polykit X1 is a DIY semi-modular, analog, patchable synthesizer
167 parts94 - 2 layers281.1 × 236.5 mm

MiniDrumkit2
Fihdi/MiniDrumkit
Eurorack DrumKit module with a 3 channel wave-file player and analog Hi-Hat and Kick Drum sections
239 parts15MIT - 2 layers58.4 × 50.8 mm

Haible tau phaser plug in board
JordanAceto/VCF_plug_in_boards
Various small synthesizer Voltage Controlled Filter pcbs
140 parts11CC-BY-4.0
Questions
How big is the Adsr vca core PCB?
It measures 58 × 65 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Adsr vca core use?
68 parts, built around the LM324, TL072, BC847BS and BC857. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Adsr vca core KiCad files?
From the shmoergh/moduleur repository on GitHub, at the commit this page was made from: the board is modules/05-adsr-vca/electronics/core/adsr-vca-core.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Adsr vca core design in my own project?
Its repository states no licence, so its author keeps all rights: ask shmoergh before reusing the design.