Skip to the content
2 layers59.6 × 109.5 mmDrop, the printed circuit board in 3D

Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

Size
59.6 × 109.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
40
Nets
70
Pads
139
Tracks, vias
105, 1
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
2 Dec 2020
Updated
21 Oct 2026

Overview

Drop is an open-source printed circuit board by ohmtech-rdi, from the ohmtech-rdi/eurorack-blocks repository on GitHub. It is a 2-layer board of 59.6 × 109.5 mm with 40 parts on 70 nets, routed with 105 tracks and 1 via.

Its parts include 11 connectors, 3 diodes, 3 switches and 1 resistor. It belongs with the audio and music boards and the STM32 boards of this library.

README

blocks/slider/README.md

slider

Description

This block is a simple potentiometer and LED in a slider form factor.

It is adapted from the Mutable Instuments Stages schematics.

Soldering

Pin headers don't come with just one position. Instead of that, the BOM has 2-position pin male headers that need to be broke into 2 pieces.

Usage

This block provides a silder potentiometer with a red LED.

Power

This modules needs to be connected to the 3V3A and GND lines from the power block.

On Daisy Seed, use the 3V3 Analog Power I/O on Pin 21, not the digital power.

All GND pins are internally connected in the block.

Signal

The signal IN drives the LED. It should be connected to any GPIO of the target MCU, preferably non-analog GPIOs.

The signal OUT is the potentiometer value. It should be connected to any Analog GPIO of the target MCU.

When using Daisy Seed as a development platform, see its pinout for details. The Daisy Seed has a total of 31 GPIOs, only 12 of which are analog.

Design

Gerber renders made with tracespace view.

Parts

40
QtyValueFootprintReferences
8INConnector_Thonk:ThonkiconnJackJ1, J2, J3, J4, J5, J7, J8, J10
8KNURLED NUTEmpty:EmptyH4, H5, H6, H7, H8, H9, H10, H11
2BXConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalZZ3, ZZ7
2LEDLED_THT:LED_D3.0mmD1, D2
2LXConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalZZ4, ZZ12
2SW_Push_DualSwitch_Thonk:SW_SPST_CKD6RSW2, SW3
1100kPotentiometer_Thonk:SongHueiTallTrim9RV2
1100kPotentiometer_Thonk:AlphaPot9ShaftDRV1
110kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
1ANALOGConnector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_VerticalZZ5
1CIXConnector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_VerticalZZ2
1GNDConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ11
1Header1Empty:EmptyH1
1Header2Empty:EmptyH2
1LED_Dual_ACALED_THT:LED_D3.0mm-3D3
1LOGOLogo_Erb:ErbLog.15mmG***
1POWER1Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ9
1POWER2Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ6
1PXConnector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_VerticalZZ1
1ROGAN 6PSEmpty:EmptyH3
1SDConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalZZ10
1SW_SPDTSwitch_Thonk:SW_SPDT_DailywellSW1

More from ohmtech-rdi/eurorack-blocks

12
  • 2 layers148 × 84.5 mmPanel daisy, the printed circuit board in 3D

    Panel daisy

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    259 parts410
  • 2 layers59.6 × 109.5 mmKivu12, the printed circuit board in 3D

    Kivu12

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    136 parts410
  • 2 layers59.6 × 109.5 mmKivu12, the printed circuit board in 3D

    Kivu12

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    80 parts410
  • 2 layers59.6 × 109.5 mmCustom, the printed circuit board in 3D

    Custom

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    17 parts410
  • 2 layers59.6 × 109.5 mmCustom, the printed circuit board in 3D

    Custom

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    14 parts410
  • 2 layers25 × 19 mmAudio in daisy, the printed circuit board in 3D

    Audio in daisy

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    13 parts410
  • 2 layers25 × 19 mmAudio out daisy, the printed circuit board in 3D

    Audio out daisy

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    13 parts410
  • 2 layers25 × 19 mmCv in, the printed circuit board in 3D

    Cv in

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    13 parts410
  • 2 layers37 × 21.5 mmPower bus, the printed circuit board in 3D

    Power bus

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    9 parts410
  • 2 layers20 × 19 mmGate in, the printed circuit board in 3D

    Gate in

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    8 parts410
  • 2 layers20 × 19 mmRegulator daisy, the printed circuit board in 3D

    Regulator daisy

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    8 parts410
  • 2 layers20 × 19 mmGate out, the printed circuit board in 3D

    Gate out

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    7 parts410

Similar boards

  • 2 layers139.7 × 73.7 mm134pin 7-967288-1, the printed circuit board in 3D

    134pin 7-967288-1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    40 parts1.2k
  • 2 layers149.4 × 177.4 mmLightsculpture, the printed circuit board in 3D

    Lightsculpture

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    40 parts915
  • 2 layers150 × 50 mmEleLab v2 Bus150, the printed circuit board in 3D

    EleLab v2 Bus150

    Chrismettal/EleLab_v2

    Cheap DIY lab system for hobbyists and the tinkering folk

    40 parts531GPL-3.0
  • 2 layers66.4 × 48.1 mmRaspberry, the printed circuit board in 3D

    Raspberry

    Chrismettal/flipper-zero-backpacks

    Backpack-style addon boards for the Flipper Zero!

    40 parts456
  • 2 layers44 × 44 mmTrackball, the printed circuit board in 3D

    Trackball

    jfedor2/rp2040-pmw3360

    RP2040+PMW3360 PCB and code

    40 parts432
  • 2 layers90.8 × 53.3 mmABSIS Bus Master, the printed circuit board in 3D

    ABSIS Bus Master

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    40 parts431
  • 2 layers123.8 × 73.5 mmAttic, the printed circuit board in 3D

    Attic

    simondlevy/Hackflight

    Minimalist flight-control toolkit for makers

    40 parts334GPL-3.0
  • 2 layers80.9 × 56.2 mmAdapter, the printed circuit board in 3D

    Adapter

    kervinck/gigatron-rom

    System, apps and tooling for the Gigatron TTL microcomputer

    40 parts292BSD-2-Clause

Questions

How big is the Drop PCB?

It measures 59.6 × 109.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Drop use?

40 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Drop KiCad files?

From the ohmtech-rdi/eurorack-blocks repository on GitHub, at the commit this page was made from: the board is samples/drop/artifacts/hardware/Drop.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Drop design in my own project?

Its repository states no licence, so its author keeps all rights: ask ohmtech-rdi before reusing the design.