4 layers39.4 × 39.4 mm
2 layers26.5 × 55.5 mm
Cgf.CameraControl.Hardware
sensslen/Cfg.CameraControl.HardwareHardware needed to control a lanc camera with a PTZ head
- Size
- 26.5 × 55.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 38
- Pads
- 118
- Tracks, vias
- 348, 227
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 26 May 2024
- Updated
- 5 Jan 2026
Overview
Cgf.CameraControl.Hardware is an open-source printed circuit board by sensslen, from the sensslen/Cfg.CameraControl.Hardware repository on GitHub, published under the MIT licence. It is a 2-layer board of 26.5 × 55.5 mm with 30 parts on 38 nets, routed with 348 tracks and 227 vias.
It is built around the WT32-ETH01, 74LVC2T45DC and BSS123, with the 150066RG74000, MUN5211DW1 and SJ1-2503A among its other parts. Its parts include 8 resistors, 6 capacitors, 6 connectors, 4 ICs and 4 transistors.
Main components
6WT32-ETH01
-Ethernet ModulesWireless-tag
74LVC2T45DC
VSSOP-8-0.5mm-40℃~+125℃ 1 1.2V~5.5V 1.2V~5.5V 2 420Mbps Bidirectional Power-Off Protection Tri-State VSSOP-8-0.5mm Translators, Level Shifters ROHSNexperiaTranslators, Level Shifters
BSS123
SOT-23-55℃~+150℃ 1 N-channel 1.4V 1.4nC@10V 100V 170mA 22pF 2pF 3.5pF 680mW 6Ω@10V、10Ω@4.5V N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
150066RG74000
SMD-4P,1.6x1.6mm-40℃~+85℃ 130° 20mA 2V、3.2V 300mcd、560mcd 515nm、630nm 520nm、625nm 72mW、105mW Discrete Diode Red, Emerald Green Water Clear SMD-4P,1.6x1.6mm LED Indication - Discrete ROHSWürth ElektronikLight Emitting Diodes (LED)
MUN5211DW1
SOT-363-55℃~+150℃ 1 1.2V 100mA 100nA 13kΩ 2 NPN (Pre-Biased) 200mV 250mV 256mW 2V 35 50V NPN SOT-363 Digital Transistors ROHSonsemiDigital Transistors
SJ1-2503A
插件,5x7.8mm-25℃~+85℃ 12V 1A 2.5mm Headphone Jack Brass、Copper alloy Tin 插件,5x7.8mm Audio Connectors ROHSCUIAudio Connectors (Headphones)
README
README.mdCfg.CameraControl.Hardware
Hardware needed to control a lanc camera with a PTZ head
The schematic looks like: 
additional info
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1uF | Capacitor_SMD:C_0805_2012Metric | C1, C3, C5, C6 |
| 3 | BSS123 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q5 |
| 2 | 100 | Resistor_SMD:R_0805_2012Metric | R5, R6 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric | C2, C4 |
| 2 | 10K/5% | Resistor_SMD:R_0805_2012Metric | R7, R8 |
| 2 | 150 | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | 150066RG74000 | FootprintLibrary:SMT_RG74000_WRE | D1, D2 |
| 2 | DRV8212DRLR | FootprintLibrary:SOT6_DRV8212_TEX | U2, U4 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 3.3K | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 5V input | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | 74LVC2T45DC | FootprintLibrary:VSSOP8_74LVC2T45DC_125_NEX-L | U5 |
| 1 | MUN5211DW1 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q4 |
| 1 | Pan | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Prog | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J6 |
| 1 | SJ1-2503A | FootprintLibrary:CUI_SJ1-2503A | J5 |
| 1 | Sensor | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | Tilt | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | WT32-ETH01 | FootprintLibrary:WT32-ETH01 | U1 |
Similar boards
- 4 layers44 × 95 mm
- 4 layers40 × 55 mm
CopterCat cm4
matveylapin/CopterCat_cm4
Полётный контроллер для стандарта FMU-v6u. Обычно на дронах для программирования устанавливают полётный контроллер, одноплатный компьютер и иногда arduino.
164 parts3Apache-2.0 - 4 layers33.5 × 33.5 mm
Esp32-led
t3mschm2d/esp32-tiny-led-controller
The main goal of this project is to develop an OpenHardware board for controlling digital LED strips. The control shall be done via Homeassistant and esphome.The PCB is based around an ESP32-U4WDH microcontroller and…
29 parts2 - 4 layers100 × 70.5 mm
Smart Irrigation SystemV2
Benedikt3141/Smart-Irrigation-System
A smart irrigation system for irrigation of up to 6 plants. It monitors the moisture, temperature, CO2 concentration, air quality ... and displays the data on a 2.4" TFT Display using an ESP32 DevKit C as processor.
147 parts1MIT - 2 layers41.5 × 19 mm
Pwm fan control
Duckle29/PWM-to-fan
A small board for controlling two DC fans from an open-drain inverted PWM output.
28 parts1MIT - 2 layers160 × 70.3 mm
Gamegirl
Samprab06/ESAP-Tetris
Tetris implementation for the ESP32 microcontroller with integrated audio support, TFT display rendering, and SD card file access.
60 parts - 4 layers26 × 30 mm
Questions
How big is the Cgf.CameraControl.Hardware PCB?
It measures 26.5 × 55.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Cgf.CameraControl.Hardware use?
30 parts, built around the WT32-ETH01, 74LVC2T45DC, BSS123 and 150066RG74000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cgf.CameraControl.Hardware KiCad files?
From the sensslen/Cfg.CameraControl.Hardware repository on GitHub, at the commit this page was made from: the board is Cgf.CameraControl.Hardware.kicad_pcb and its schematic Cgf.CameraControl.Hardware.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cgf.CameraControl.Hardware design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).