

CCdrum
Energia code and Kicad files for a Korg Volca Drum MIDI CC board
- Size
- 100 × 37.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 38
- Pads
- 131
- Tracks, vias
- 239, 14
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Mar 2019
- Updated
- 7 May 2019
Overview
CCdrum is an open-source printed circuit board by sensai7, from the sensai7/CCVDrum repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 37.4 mm with 35 parts on 38 nets, routed with 239 tracks and 14 vias.
It is built around the 74AUP1G17GW and AMS1117-3.3. Its parts include 10 resistors, 6 diodes, 5 capacitors, 3 ICs and 3 connectors. It belongs with the audio and music boards and the MSP430 boards of this library.
Main components
274AUP1G17GW
TSSOP-5-1.3mm-40℃~+125℃ 0.8V~3.6V 1 1 1.4uA 2.7ns@3V,30pF 4mA 4mA 74AUP Push-pull Schmitt trigger Unidirectional TSSOP-5-1.3mm Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, TransceiversAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdCCVDrum
Energia code and Kicad files for a Korg Volca Drum MIDI CC board

In the Korg Volca Drum there's a hidden menu when you press the edit/step to change five adittional settings for each part and layer: bit resolution, overdrive, wave folding, pan, and pre-amp gain.
This repository contains the code, schematic, and PCB files to build and program a circuit board to control the 'hidden' paramenters from a Korg Volca Drum, having one dedicated knob control for each one and being able to select the first, second, or both layers with the provided push buttons. The circuit is based on a MSP430G2553, a common and cheap microprocessor from Texas Instruments, and it's coded in Energia, an Arduino port for TI processors, bringing the simplicity of the Wiring language and the huge Arduino community projects available to the Texas Instruments MCU ecosystem.
Some features:
- The board is designed to fit inside a 1590B enclosure, a really common and cheap enclosure model for guitar pedals.
- The power plug is a 2.1mm barrel jack and with the current Voltage Regulator model, Voltages from 5V to 20V are fine.
- There's a optional MIDI input to use as MIDI thru if you need to chain your devices.
The Volca must be up to date, or at least in version 1.11 which changed a critical bug on the MIDI implementation (BIT knob won't work and the others would be changed). It must also be set in Split Channel Mode, the CC messages needed (BIT, DRV,... etc) are not available in the Single Channel Mode. My unit came with Split mode by default, but to check and change it, turn it on while holding ●RECORD, then press one of the channels to select it, then press it again to change it to channels 1-6. Press the ●RECORD button again when your unit's screen shows MID 1--6.
The easiest way to flash a different firmware would be owning a MSP430G2 (MSP-EXP430G2) launchpad, or the newer MSP430G2ET (MSP-EXP430G2ET) LaunchPad, place your MCU in the LaunchPad socket and flash the new code using Energia.
Useful links
- Korg Volca Drum official site: https://www.korg.com/us/products/dj/volca_drum/
- Energia Project site: http://energia.nu
- KiCad footprints and 3D models http://smisioto.no-ip.org/elettronica/kicad/kicad-en.htm
Datasheets
- MSP430G2553 Mixed Signal Microcontroller http://www.ti.com/lit/ds/symlink/msp430g2553.pdf
- 6N139 High Speed Optocoupler https://www.vishay.com/docs/83605/6n139.pdf
- 74HC14 Hex inverting Schmitt trigger https://assets.nexperia.com/documents/data-sheet/74HC_HCT14.pdf
- LM1117IMP-3.3 LDO Voltage Regulator http://www.ti.com/lit/ds/symlink/lm1117.pdf
(Only in older versions):
- AMS1117-3.3 1A LOW DROPOUT VOLTAGE REGULATOR http://www.advanced-monolithic.com/pdf/ds1117.pdf
- 74AUP1G17 SINGLE SCHMITT-TRIGGER BUFFER https://www.diodes.com/assets/Datasheets/74AUP1G17.pdf
TODO
- Fix minor bugs
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | w_pth_resistors:trimmer_alps-rk09k1130ah1 | RV1, RV2, RV3, RV4, RV5, RV6 |
| 6 | RLED | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R4, R5, R6, R7 |
| 2 | 100 | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C5 |
| 2 | 68 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8, R9 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW1, SW2 |
| 1 | 1 | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | 10 | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C4 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10 |
| 1 | 1n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C3 |
| 1 | 2 | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | 3 | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | 330 | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 4 | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | 47k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 5 | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5 |
| 1 | 6 | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D6 |
| 1 | 74AUP1G17 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U3 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | MIDI_out | w_conn_av:din-5 | J3 |
| 1 | MSP430G2533 | Package_DIP:DIP-20_W7.62mm | U1 |
| 1 | Program | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | USB_B_μ | w_conn_pc:conn_usb_B_micro_smd-2 | J1 |
More from sensai7/CCVDrum
1- 2 layers106 × 54.5 mm

Similar boards
- 4 layers66 × 42 mm

Sbc
vd-rd/sbc_at91sam9g20
Open hardware SBC module based on AT91SAM9G20 @400MHz with 128MB RAM
116 parts2 - 2 layers24 × 41 mm

- 4 layers66 × 42 mm

- 2 layers290.1 × 130 mm

- 2 layers26.2 × 45.5 mm

PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm

- 4 layers100 × 54 mm

32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766
Questions
How big is the CCdrum PCB?
It measures 100 × 37.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CCdrum use?
35 parts, built around the 74AUP1G17GW and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CCdrum KiCad files?
From the sensai7/CCVDrum repository on GitHub, at the commit this page was made from: the board is SMD and THD/CCdrum.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CCdrum design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).