Skip to the content
2 layers78.7 × 81 mmBraids through hole V1.1 BRAIN, the printed circuit board in 3D

Braids through hole V1.1 BRAIN

sebastianbeyer/KOSMO_braids15

This is a KOSMO (Look Mum No Computer) version of the Mutable instruments braids, based on the through-hole version done by sound-force.nl.

Size
78.7 × 81 mm
Copper layers
2
Thickness
1.6 mm
Parts
68
Nets
76
Pads
259
Tracks, vias
437, 19
Pours
6
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
17 Aug 2020
Updated
10 Nov 2022

Overview

Braids through hole V1.1 BRAIN is an open-source printed circuit board by sebastianbeyer, from the sebastianbeyer/KOSMO_braids repository on GitHub. It is a 2-layer board of 78.7 × 81 mm with 68 parts on 76 nets, routed with 437 tracks and 19 vias.

It is built around the STM32F103C8T6, MCP3204-BI/P and MCP4822-E/P, with the MCP6004-E/P, TL072 and LD1117V33 among its other parts. Its parts include 24 capacitors, 23 resistors, 8 ICs, 2 diodes and 2 transistors. It belongs with the STM32 boards of this library.

Main components

6

README

README.md

This is a KOSMO (Look Mum No Computer) version of the Mutable instruments braids, based on the through-hole version done by sound-force.nl. It has only 12 bits resolution in the output because the chip is easier to work with and cheaper.

Changes to original

This project is so far only different to the soundforce version in that I removed the 3.5mm jack sockets and replaced them with molex connectors to get them connected to the larger 6.3mm jack sockets that KOSMO uses. And I made the larger KOSMO panel.

This version is still with the old (soundforce-1.1) Version of the soundforce board, without the termination series resistors on the SPI lines. I had no problems with this, but I have not changed anything on the BRAIN board, so you can just use the original gerbers.

How to build:

Go download the latest gerber files here and use them to order PCBs. If you use jlcpcb to order, make sure you check "Specify a location" at "Remove Order Number" for the panel.

For documentation and BOM look at sound-force.nl.

How to program:

BratAttack made an awesome video on how to upload the firmware to the STM32! BratAttackVideo

Changelog

1.1

Compared to the version in the top picture, I have made the cutout for the display a little bit smaller and added small "+" and "-" indicators for modulation and FM.

Parts

68
QtyValueFootprintReferences
1024.9kbraids_through-hole_V1.1_BRAIN:0204_5R30, R31, R34, R35, R41, R42, R43, R44, R52, R53
9100nbraids_through-hole_V1.1_BRAIN:C025-024X044C3, C4, C5, C6, C18, C20, C23, C27, C28
4100kbraids_through-hole_V1.1_BRAIN:0204_5R29, R47, R54, R56
410ubraids_through-hole_V1.1_BRAIN:E2-5C7, C9, C15, C33
41nbraids_through-hole_V1.1_BRAIN:C025-024X044C13, C14, C16, C17
3braids_through-hole_V1.1_BRAIN:3,2U$2, U$3, U$5
31kbraids_through-hole_V1.1_BRAIN:0204_5R22, R23, R55
2100pbraids_through-hole_V1.1_BRAIN:C025-024X044C21, C22
21N5817braids_through-hole_V1.1_BRAIN:DO41-7.6D1, D2
22N3904braids_through-hole_V1.1_BRAIN:TO92-CBEQ6, Q7
239kbraids_through-hole_V1.1_BRAIN:0204_5R45, R46
247ubraids_through-hole_V1.1_BRAIN:E2,5-6C25, C30
249.9kbraids_through-hole_V1.1_BRAIN:0204_5R25, R26
2LD1117V33braids_through-hole_V1.1_BRAIN:TO220L1IC6, IC11
1braids_through-hole_V1.1_BRAIN:1X08PIN_B
1braids_through-hole_V1.1_BRAIN:1X06SERIAL_PROG
1braids_through-hole_V1.1_BRAIN:1X09DISP_B
1braids_through-hole_V1.1_BRAIN:1X10IN_B
110kbraids_through-hole_V1.1_BRAIN:0204_5R27
110ubraids_through-hole_V1.1_BRAIN:E2-5_NPC24
120kbraids_through-hole_V1.1_BRAIN:0204_5R50
1470nbraids_through-hole_V1.1_BRAIN:C025-024X044C8
147pbraids_through-hole_V1.1_BRAIN:C025-024X044C29
1EURObraids_through-hole_V1.1_BRAIN:EUROPWR
1LM4040-2.5braids_through-hole_V1.1_BRAIN:TO127P254X495-3IC3
1MCP3204-BI/Pbraids_through-hole_V1.1_BRAIN:DIP254P762X432-14IC4
1MCP4822braids_through-hole_V1.1_BRAIN:MCP4822IC5
1MCP6004braids_through-hole_V1.1_BRAIN:DIL14IC7
1STM32F103C8T6braids_through-hole_V1.1_BRAIN:STM32F103C8T6UC1
1TL072braids_through-hole_V1.1_BRAIN:DIL08IC10
1TL074Pbraids_through-hole_V1.1_BRAIN:DIL14IC9

More from sebastianbeyer/KOSMO_braids

1
  • 2 layers87 × 96 mmBraids through hole V1.1 CONTROL, the printed circuit board in 3D

    Braids through hole V1.1 CONTROL

    sebastianbeyer/KOSMO_braids

    This is a KOSMO (Look Mum No Computer) version of the Mutable instruments braids, based on the through-hole version done by sound-force.nl.

    56 parts15

Similar boards

  • 2 layers39.4 × 107.9 mmDuinoRack, the printed circuit board in 3D

    DuinoRack

    jypma/modsynth

    Open hardware eurorack synth modules

    123 parts8
  • 4 layers90 × 210 mmPID Board, the printed circuit board in 3D

    PID Board

    AaronDoubert/quadcopter-pid-boards

    Analog PID flight controller for a 5" quadcopter: roll, pitch and yaw loops built from op-amps and trimpots, fed by an MPU-6050 through a small ATtiny/DAC "shim", driving a 4in1 ESC. Designed in KiCad 10.

    228 parts
  • 2 layers225 × 110 mmOblique Palette 0.3 PCB, the printed circuit board in 3D

    Oblique Palette 0.3 PCB

    Oblique-Industry/Oblique-Easel

    Code, Electronics, and Industrial Design for the Oblique Easel Artmaschine Cyberdeck

    307 parts5
  • 2 layers111.3 × 106.4 mmSuper Sixteen v1, the printed circuit board in 3D

    Super Sixteen v1

    matthewcieplak/super-sixteen

    Code and schematics for the Super Sixteen Eurorack sequencer

    141 parts171
  • 2 layers100 × 100 mmKicadJE uP DAC, the printed circuit board in 3D

    KicadJE uP DAC

    promesoft/KicadJE_uP_DAC

    STM32 and ATMEGA32A - Eurorack DAC MCP4822 output - Use for Sub 400Hz DDS, LFO, ADSR, Effects - and a small 555 VCO - DDS1 DDS2

    275 parts7
  • 4 layers71.1 × 99.1 mmQuad adsr, the printed circuit board in 3D

    Quad adsr

    JordanAceto/quad_ADSR_board

    PCB for a quad eurorack ADSR

    197 parts5

Questions

How big is the Braids through hole V1.1 BRAIN PCB?

It measures 78.7 × 81 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Braids through hole V1.1 BRAIN use?

68 parts, built around the STM32F103C8T6, MCP3204-BI/P, MCP4822-E/P and MCP6004-E/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Braids through hole V1.1 BRAIN KiCad files?

From the sebastianbeyer/KOSMO_braids repository on GitHub, at the commit this page was made from: the board is braids_BRAIN/braids_through-hole_V1.1_BRAIN.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Braids through hole V1.1 BRAIN design in my own project?

Its repository states no licence, so its author keeps all rights: ask sebastianbeyer before reusing the design.