
OSO SWAT C1
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

A board to upgrade the uConsole, expanding the GPIO and unused USB with i2c headers and a USB2 hub.
UConsole Upgrade Board is an open-source printed circuit board by scriven42, from the scriven42/uConsole-Upgrade-Board repository on GitHub. It is a 4-layer board of 32.6 × 51.3 mm with 40 parts on 60 nets, routed with 303 tracks and 34 vias.
Its parts include 14 capacitors, 5 resistors, 4 connectors, 1 IC and 1 diode.
A board to upgrade the uConsole, expanding the GPIO and unused USB with i2c headers and a USB2 hub.
It connects to the 40-pin, 0.5mm pitch GPIO FFC/FPC connector, as well as being soldered to the unallocated USB4 pads. It splits out 3.3V I2C, providing a Qwiic connector (JST-SH) and soldering headers, and also provides a GL850-based USB2 Hub, the 4 ports accessible by soldering headers.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C5, C6, C7, C10, C11, C12, C15 |
| 6 | FB | Inductor_SMD:L_0805_2012Metric | LB1, LB2, LB3, LB4, LB5, LB6 |
| 4 | 100uF | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D | EC2, EC3, EC4, EC5 |
| 4 | USBA-A | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | DOWN1, DOWN2, DOWN3, DOWN4 |
| 2 | 20P | Capacitor_SMD:C_0603_1608Metric | C8, C9 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C13 |
| 1 | 12MHz | Crystal:Crystal_SMD_HC49-SD | X1 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 470R | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 47K | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 680R 1% | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04_Pin | Connector_JST:JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J1 |
| 1 | Conn_01x40 | Connector_FFC-FPC:TE_4-1734839-0_1x40-1MP_P0.5mm_Horizontal | J4 |
| 1 | GL850AUSB | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U1 |
| 1 | PWR_LED | LED_SMD:LED_0603_1608Metric | LED1 |

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
hzeller/spixels
Spixels - 16-SPI LED Raspberry Pi adapter with library (SPI - Pixels).


intergalaktik/Extension_Boards_for_Olimex_GateMate
Simple extension boards for Olimex GateMate FPGA Board



M0LTE/pi-transceiver
An attempt to build a complete ham radio transceiver around a Raspberry Pi

It measures 32.6 × 51.3 mm and has 4 copper layers, 1.6 mm thick.
40 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the scriven42/uConsole-Upgrade-Board repository on GitHub, at the commit this page was made from: the board is uConsole Upgrade Board.kicad_pcb and its schematic GL850G-USB2.0-HUB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask scriven42 before reusing the design.