
SCART switcher
nunosousa/SCART-switcher
An old school SCART switcher. Its main purpose will be to automaticaly detect and switch the video output to the active input video source.

CAN Contactless is an open-source printed circuit board by sc-hw-tothm, from the sc-hw-tothm/CAN_Contactless_PCB repository on GitHub. It is a 2-layer board of 34.7 × 11.3 mm with 20 parts on 19 nets, routed with 159 tracks and 8 vias.
It is built around the SN65HVD230D and OPA4354AID. Its parts include 11 resistors, 6 capacitors, 2 ICs and 1 connector.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R3, R4, R5, R6, R7 |
| 4 | 100nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2, C3, C4 |
| 1 | 1,8k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C6 |
| 1 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | C5 |
| 1 | 120 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R11 |
| 1 | 2.2k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R9 |
| 1 | 3.3k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R10 |
| 1 | 330 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R8 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical_SMD_Pin1Right | J1 |
| 1 | OPA4354A | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U1 |
| 1 | SN65HVD230 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |

nunosousa/SCART-switcher
An old school SCART switcher. Its main purpose will be to automaticaly detect and switch the video output to the active input video source.

menloresearch/asimov-1
v1 of Asimov, an open-source humanoid robot

tenderlove/initial-v
It's a BMW shifter converted to a Bluetooth Keyboard that you use with Vim



hirakuni45/RX
Renesas RX Microcontroller, C++ framework, Library, Sample

henrikssn/TurboCAN
This is the official repository for the TurboCAN controller board, designed specifically for the Voron AfterBurner toolhead but can also be used on similar toolheads using NEMA17 steppers.

VIPQualityPost/lemon-pepper-stepper
simplefoc all-in-one 50W hybrid stepper + bldc driver
It measures 34.7 × 11.3 mm and has 2 copper layers, 1.6 mm thick.
20 parts, built around the SN65HVD230D and OPA4354AID. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sc-hw-tothm/CAN_Contactless_PCB repository on GitHub, at the commit this page was made from: the board is CAN_Contactless.kicad_pcb and its schematic CAN_Contactless.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask sc-hw-tothm before reusing the design.