Skip to the content
2 layers285.5 × 115.6 mmKana60, the printed circuit board in 3D

JP layout 60% mechanical keyboard / prototype

Size
285.5 × 115.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
151
Nets
89
Pads
538
Tracks, vias
1,090, 62
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
16 Jun 2019
Updated
27 Mar 2021

Overview

Kana60 is an open-source printed circuit board by sasaplus1, from the sasaplus1/kana60 repository on GitHub, published under the MIT licence. It is a 2-layer board of 285.5 × 115.6 mm with 151 parts on 89 nets, routed with 1,090 tracks and 62 vias.

Its parts include 71 switches, 67 diodes and 1 IC. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.

README

README.md

kana60

JP layout 60% mechanical keyboard

kana60 keyboard

Keycaps: FILCO FKCS108NMP and another 1 keycap (At bottom of N key).

QMK Firmware: sasaplus1/qmk_firmware

How to verify checksums

console
$ ls -1
kana60-acrylic-plates.zip
kana60-sha256sum.txt
kana60-top-plate.zip
kana60.zip
$ shasum --check kana60-sha256sum.txt
kana60-acrylic-plates.zip: OK
kana60.zip: OK
kana60-top-plate.zip: OK

How to release

remove dist files:

console
$ make clean

generate some files:

  • open kana60.kicad_pcb and generate gerber files and drill files, via: plot...
  • open kana60-top-plate.kicad_pcb and generate gerber files and drill files, via: plot...
  • open kana60-acrylic-plates.kicad_pcb and generate PDF files, via: plot...

generate zip files and checksum file:

console
$ make build create_checksum

verify zip files:

console
$ make info
zipinfo dist/kana60-acrylic-plates/kana60-acrylic-plates.zip
Archive:  dist/kana60-acrylic-plates/kana60-acrylic-plates.zip
Zip file size: 22152 bytes, number of entries: 2
-rw-r--r--  3.0 unx     3150 bx defN 19-Oct-27 17:44 kana60-acrylic-plates-main.pdf
-rw-r--r--  3.0 unx    20236 bx defN 19-Oct-27 17:44 kana60-acrylic-plates-dimensions.pdf
2 files, 23386 bytes uncompressed, 21742 bytes compressed:  7.0%
zipinfo dist/kana60/kana60.zip
Archive:  dist/kana60/kana60.zip
Zip file size: 455650 bytes, number of entries: 9
-rw-r--r--  3.0 unx   807098 tx defN 19-Oct-27 17:44 kana60.GBL
-rw-r--r--  3.0 unx   293239 tx defN 19-Oct-27 17:44 kana60.GBS
-rw-r--r--  3.0 unx    49400 tx defN 19-Oct-27 17:44 kana60.GBO
-rw-r--r--  3.0 unx      980 tx defN 19-Oct-27 17:44 kana60.GML
-rw-r--r--  3.0 unx   522285 tx defN 19-Oct-27 17:44 kana60.GTL
-rw-r--r--  3.0 unx   293239 tx defN 19-Oct-27 17:44 kana60.GTS
-rw-r--r--  3.0 unx    88481 tx defN 19-Oct-27 17:44 kana60.GTO
-rw-r--r--  3.0 unx     4210 tx defN 19-Oct-27 17:44 kana60-NPTH.TXT
-rw-r--r--  3.0 unx    11536 tx defN 19-Oct-27 17:44 kana60.TXT
9 files, 2070468 bytes uncompressed, 454286 bytes compressed:  78.1%
zipinfo dist/kana60-top-plate/kana60-top-plate.zip
Archive:  dist/kana60-top-plate/kana60-top-plate.zip
Zip file size: 93042 bytes, number of entries: 9
-rw-r--r--  3.0 unx   201454 tx defN 19-Oct-27 17:44 kana60-top-plate.GBL

push tag to GitHub and create Release:

console
$ git tag 1.0
$ git push origin 1.0

upload files:

  • kana60-acrylic-plates.zip
  • kana60-sha256sum.txt
  • kana60-top-plate.zip
  • kana60.zip

License

The MIT license.

Parts

151
QtyValueFootprintReferences
67Dkicad-footprints:diodeD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +51
57SW_PUSHKeebio-Parts:Hybrid_PCB_100HSW1, SW2, SW10, SW11, SW12, SW13, SW14, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW24 +41
9MountingHole_2.2mm_M2_PadMountingHole:MountingHole_2.2mm_M2_PadREF1, REF2, REF3, REF4, REF5, REF6, REF7, REF8, REF9
6SW_PUSHKeebio-Parts:Hybrid_PCB_125HSW56, SW57, SW58, SW59, SW62, SW63
4SW_PUSHKeebio-Parts:Hybrid_PCB_200HSW42, SW43, SW60, SW70
2SW_PUSHKeebio-Parts:Hybrid_PCB_175HSW29, SW55
1LOGOkicad-footprints:sasaplus1-icon-48G***
1LOGOkana60:kana60-titleG***
1LOGOkicad-footprints:sasaplus1-icon-64G***
1ProMicroKeebio-Parts:ArduinoProMicroU1
1SW_PUSHKeebio-Parts:Hybrid_PCB_150HSW15
1SW_PushKeebio-Parts:SW_Tactile_SPST_Angled_MJTP1117SW71

Similar boards

  • 2 layers60 × 126.6 mmV3 Connector + IRLED, the printed circuit board in 3D

    V3 Connector + IRLED

    PiTracLM/PiTrac

    Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)

    151 parts439GPL-2.0
  • 2 layers285 × 94.2 mmKeyboard wabble-60, the printed circuit board in 3D

    Keyboard wabble-60

    rgoulter/keyboard-labs

    Repo with my PCB designs and keyboard firmware

    151 parts236
  • 2 layers250 × 10 mmRgbwstrip120 250, the printed circuit board in 3D

    Rgbwstrip120 250

    cnlohr/cnhardware

    My dumping grounds for all my kicad projects and random hardware bringup.

    151 parts114
  • 2 layers96.3 × 95.9 mmLergo, the printed circuit board in 3D

    Lergo

    AxelVoitier/keebs

    Axel's keebs

    151 parts71
  • 2 layers101.6 × 147.3 mmKarabas pro revC1, the printed circuit board in 3D

    Karabas pro revC1

    andykarpov/karabas-pro

    FPGA based retrocomputer with FDD and HDD controllers

    151 parts37MIT
  • 2 layers242.3 × 75.4 mmM3n3van, the printed circuit board in 3D

    M3n3van

    matthewdias/m3n3van

    A minivan case compatible PCB with 2x3u split space

    151 parts20MIT

Questions

How big is the Kana60 PCB?

It measures 285.5 × 115.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Kana60 use?

151 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Kana60 KiCad files?

From the sasaplus1/kana60 repository on GitHub, at the commit this page was made from: the board is kana60.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Kana60 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).