Skip to the content
2 layers96.3 × 95.9 mmLergo, the printed circuit board in 3D

Lergo

AxelVoitier/keebs71

Axel's keebs

Full screenGitHub.kicad_pcb
Size
96.3 × 95.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
151
Nets
80
Pads
848
Tracks, vias
2,141, 285
Pours
8
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
7 Oct 2021
Updated
9 Apr 2026

Overview

Lergo is an open-source printed circuit board by AxelVoitier, from the AxelVoitier/keebs repository on GitHub. It is a 2-layer board of 96.3 × 95.9 mm with 151 parts on 80 nets, routed with 2,141 tracks and 285 vias.

Its parts include 23 switches, 10 diodes, 5 resistors, 5 connectors and 4 capacitors. It belongs with the AVR (ATmega, ATtiny) boards of this library.

README

README.md

keebs

Axel's keebs

Parts

151
QtyValueFootprintReferences
17SW_PUSH_LEDLergo Footprints:CherryMX_Lergo_v1_Module_1uSW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17 +1
10MountingHole_PadLergo Footprints:1pad_connH153, H154, H157, H158, H161, H162, H165, H166, H168, H169
10SW_PushLergo Footprints:CherryMX_Lergo_v1_Module_2_M2%R, %R, %R, %R, %R, %R, %R, %R, %R, %R
9MountingHole_PadLergo Footprints:1pin_connH57, H152, H155, H156, H159, H160, H163, H164, H167
8Lergo Footprints:M1.4_tapping_Hole, , , , , , ,
8SolderJumper_3_OpenLergo Footprints:SolderJumper-3_P1.3mm_Open_TrianglePad1.0x1.5mm_duplexJP101, JP102, JP103, JP104, JP105, JP106, JP107, JP108
7MountingHole_PadLergo Footprints:1pin_rect_connH6, H6, H101, H102, H135, H138, H170
6Lergo Footprints:M2_Hole_Standoff, , , , ,
5D_SmallLergo Footprints:diode_TH_SMD_rev3_altD1, D2, D3, D4, D5
4100nLergo Footprints:C_0603_0805_HandSolderC19, C20, C21, C22
44k7Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR102, R103, R104, R105
4LED_SK6812_Mini_ELergo Footprints:SK6812_Mini_ELED1, LED2, LED3, LED4
2Lergo Footprints:CherryMX_MidHeight_Choc_Silk_Line,
2,
25way_switchLergo Footprints:Five_Way_Switch_Panasonic_EVQQ7SW24, SW24
2Conn_01x08Lergo Footprints:PinHeader_1x08_P2.54mm_Vertical_rev2J3, J4
2MJ-4PP-9Lergo Footprints:MJ-4PP-9J1, J6
2Val**Lergo Footprints:M2_Hole_Standoff_Large_CleareanceRef**, Ref**
1Lergo Footprints:CherryMX_2U_Outline
1Lergo Footprints:OLED
1510RResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR101
1Conn_01x03Lergo Footprints:PinHeader_1x03_P2.54mm_VerticalJ2
1DLergo Footprints:diode_TH_SMD_rev3D18
1ProMicroLergo Footprints:Arduino_ProMicro_RivetsU1
1Rotary_Encoder_SwitchLergo Footprints:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm_rev2SW20
1Rotary_Encoder_SwitchLergo Footprints:RollerEncoder_Panasonic_EVQWGD001_No_CutoutSW19
1SW_PUSH_LEDLergo Footprints:CherryMX_Lergo_v1_Module_2uSW18
1SW_PushLergo Footprints:ResetSWSW22

The 114 most common of 151 parts.

More from AxelVoitier/keebs

2

Similar boards

  • 2 layers60 × 126.6 mmV3 Connector + IRLED, the printed circuit board in 3D

    V3 Connector + IRLED

    PiTracLM/PiTrac

    Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)

    151 parts439GPL-2.0
  • 2 layers285 × 94.2 mmKeyboard wabble-60, the printed circuit board in 3D

    Keyboard wabble-60

    rgoulter/keyboard-labs

    Repo with my PCB designs and keyboard firmware

    151 parts236
  • 2 layers250 × 10 mmRgbwstrip120 250, the printed circuit board in 3D

    Rgbwstrip120 250

    cnlohr/cnhardware

    My dumping grounds for all my kicad projects and random hardware bringup.

    151 parts114
  • 2 layers101.6 × 147.3 mmKarabas pro revC1, the printed circuit board in 3D

    Karabas pro revC1

    andykarpov/karabas-pro

    FPGA based retrocomputer with FDD and HDD controllers

    151 parts37MIT
  • 2 layers242.3 × 75.4 mmM3n3van, the printed circuit board in 3D

    M3n3van

    matthewdias/m3n3van

    A minivan case compatible PCB with 2x3u split space

    151 parts20MIT
  • 2 layers98.5 × 132.5 mmAdsr-3310-8, the printed circuit board in 3D

    Adsr-3310-8

    polykit/adsr-3310-8

    Kicad schematics and PCB layout for an 8 channel ADSR based on CEM3310/AS3310

    151 parts14

Questions

How big is the Lergo PCB?

It measures 96.3 × 95.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Lergo use?

151 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Lergo KiCad files?

From the AxelVoitier/keebs repository on GitHub, at the commit this page was made from: the board is Lergo/PCB/Lergo.kicad_pcb and its schematic Framework/HandyWork-5x3-with-mods-with-nav/AluPlate/HandyWork-5x3-with-mods-with-nav-AluPlate.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Lergo design in my own project?

Its repository states no licence, so its author keeps all rights: ask AxelVoitier before reusing the design.