2 layers
2 layers56 × 95 mm
Octave Switch v4.0 panel
minisystem/Eurorack40Eurorack modules
- Size
- 56 × 95 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 151
- Nets
- 34
- Pads
- 419
- Tracks, vias
- 1,035, 48
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 29 Dec 2014
- Updated
- 7 Apr 2015
Overview
Octave Switch v4.0 panel is an open-source printed circuit board by minisystem, from the minisystem/Eurorack repository on GitHub. It is a 2-layer board of 56 × 95 mm with 151 parts on 34 nets, routed with 1,035 tracks and 48 vias.
Its parts include 66 resistors, 27 capacitors, 6 ICs, 6 diodes and 6 connectors.
Parts
151| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | VAL** | HOLE-0.5MM | HOLE-0.5MM, HOLE-0.5MM, HOLE-0.5MM, HOLE-0.5MM, HOLE-0.5MM, HOLE-0.5MM, HOLE-0.5MM, HOLE-0.5MM, HOLE-0.5MM, HOLE-0.5MM, HOLE-0.5MM, HOLE-0.5MM, HOLE-0.5MM, HOLE-0.5MM, HOLE-0.5MM, HOLE-0.5MM +6 |
| 18 | 0.1u | SM0805-HAND | C1, C1, C1, C2, C2, C2, C4, C4, C4, C6, C6, C6, C7, C7, C7, C9 +2 |
| 18 | 10K | SM0805-HAND | R3, R3, R3, R5, R5, R5, R6, R6, R6, R8, R10, R10, R10, R11, R11, R11 +2 |
| 12 | 100K | SM0805-HAND | R12, R12, R12, R13, R13, R13, R18, R18, R18, R20, R20, R20 |
| 12 | 33K | SM0805-HAND | R4, R4, R4, R7, R7, R7, R16, R16, R16, R17, R17, R17 |
| 12 | 4.7K | SM0805-HAND | R1, R1, R1, R2, R2, R2, R14, R14, R14, R15, R15, R15 |
| 9 | 0.001u | SM0805-HAND | C3, C3, C3, C5, C5, C5, C8, C8, C8 |
| 6 | 10K | BI_64W_TRIM | TRIM2, TRIM2, TRIM2, TRIM3, TRIM3, TRIM3 |
| 6 | 15K | SM0805-HAND | R21, R21, R21, R22, R22, R22 |
| 6 | CONN_4 | CONN_0100_X_4 | P1, P1, P1, P2, P2, P2 |
| 6 | LM4040-2.5 | SOT23 | D1, D1, D1, D2, D2, D2 |
| 6 | TL074 | TSSOP14 | U1, U1, U1, U2, U2, U2 |
| 3 | 100K | BI_64W_TRIM | TRIM4, TRIM4, TRIM4 |
| 3 | 10K | RV16A-41 | POT1, POT1, POT1 |
| 3 | 1K | BI_64W_TRIM | TRIM1, TRIM1, TRIM1 |
| 3 | 49.9K | SM0805-HAND | R19, R19, R19 |
| 3 | 9.53K | SM0805-HAND | R9, R9, R9 |
| 3 | DP6T-QY-25S-A | QY-25S-2P6C-JRL | SW1, SW1, SW1 |
More from minisystem/Eurorack
12- 2 layers43 × 22 mm
- 2 layers58 × 104.5 mm
- 2 layers56 × 31 mm
- 2 layers39 × 100 mm
- 2 layers35 × 20 mm
- 2 layers35 × 20 mm
- 2 layers80 × 35 mm
- 2 layers50 × 31 mm
- 2 layers39 × 100 mm
- 2 layers40 × 20 mm
- 2 layers46 × 43 mm
Similar boards
- 2 layers60 × 126.6 mm
V3 Connector + IRLED
PiTracLM/PiTrac
Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)
151 parts439GPL-2.0 - 2 layers285 × 94.2 mm
- 2 layers250 × 10 mm
Rgbwstrip120 250
cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.
151 parts114 - 2 layers96.3 × 95.9 mm
- 2 layers130 × 120 mm
- 2 layers101.6 × 147.3 mm
Karabas pro revC1
andykarpov/karabas-pro
FPGA based retrocomputer with FDD and HDD controllers
151 parts37MIT - 2 layers242.3 × 75.4 mm
- 2 layers98.5 × 132.5 mm
Adsr-3310-8
polykit/adsr-3310-8
Kicad schematics and PCB layout for an 8 channel ADSR based on CEM3310/AS3310
151 parts14
Questions
How big is the Octave Switch v4.0 panel PCB?
It measures 56 × 95 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Octave Switch v4.0 panel use?
151 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Octave Switch v4.0 panel KiCad files?
From the minisystem/Eurorack repository on GitHub, at the commit this page was made from: the board is Octave Switch/Octave Switch v4.0 panel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Octave Switch v4.0 panel design in my own project?
Its repository states no licence, so its author keeps all rights: ask minisystem before reusing the design.