

M3n3van
A minivan case compatible PCB with 2x3u split space
- Size
- 242.3 × 75.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 151
- Nets
- 98
- Pads
- 614
- Tracks, vias
- 1,147, 106
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 30 Nov 2020
- Updated
- 17 Jan 2022
Overview
M3n3van is an open-source printed circuit board by matthewdias, from the matthewdias/m3n3van repository on GitHub, published under the MIT licence. It is a 2-layer board of 242.3 × 75.4 mm with 151 parts on 98 nets, routed with 1,147 tracks and 106 vias.
It is built around the ATMEGA32U4-AU and PRTR5V0U2X. Its parts include 7 capacitors, 6 resistors, 6 switches, 2 ICs and 1 crystal. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATMEGA32U4-AU
QFP-44(10x10)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH QFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)PRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
README
rev2/README.mdLayout
Parts
151| Qty | Value | Footprint | References |
|---|---|---|---|
| 49 | D | Diode_SMD:D_SOD-123 | D_1, D_2, D_10, D_11, D_12, D_13, D_14, D_15, D_16, D_17, D_18, D_19, D_20, D_21, D_22, D_23 +33 |
| 48 | KEYSW | MX_Only:MXOnly-1U-NoLED | K_1, K_2, K_10, K_11, K_12, K_15, K_16, K_17, K_18, K_19, K_20, K_21, K_22, K_23, K_24, K_25 +32 |
| 10 | KEYSW | MX_Only:MXOnly-1.25U-NoLED | K_14, K_42, K_44, K_46, K_49, K_50, K_52, K_62, K_64, K_68 |
| 7 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad | H1, H2, H3, H4, H5, H6, H7 |
| 5 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C4, C5, C6, C7, C8 |
| 5 | Rotary | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1, SW2, SW3, SW4, SW5 |
| 3 | KEYSW | MX_Only:MXOnly-2U-NoStab-NoLED | K_55, K_57, K_60 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R6 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric | R2, R3 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R4, R5 |
| 2 | KEYSW | MX_Only:MXOnly-1.75U-NoLED | K_13, K_28 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | ATmega32U4-AU | Package_QFP:TQFP-44_10x10mm_P0.8mm | U2 |
| 1 | HRO-TYPE-C-31-M-12 | Type-C:HRO-TYPE-C-31-M-12-Assembly | USB1 |
| 1 | KEYSW | MX_Only:MXOnly-5U-ReversedStabilizers-NoLED | K_59 |
| 1 | KEYSW | MX_Only:MXOnly-6U-Centered-3U-ReversedStabilizers-NoLED | K_58 |
| 1 | KEYSW | MX_Only:MXOnly-3U-ReversedStabilizers-NoLED | K_54 |
| 1 | KEYSW | MX_Only:MXOnly-2.75U-ReversedStabilizers-NoLED | K_56 |
| 1 | KEYSW | MX_Only:MXOnly-1.5U-NoLED | K_27 |
| 1 | KEYSW | MX_Only:MXOnly-3U-2U-ReversedStabilizers-NoLED | K_61 |
| 1 | LOGO | Matt_Modules:m3n3silk | G*** |
| 1 | LOGO | Matt_Modules:m3n3mask | G*** |
| 1 | PRTR5V0U2X | random-keyboard-parts:SOT143B | U1 |
| 1 | Resonator_Small | Crystal:Resonator_SMD_muRata_CSTxExxV-3Pin_3.0x1.1mm_HandSoldering | Y1 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW6 |
More from matthewdias/m3n3van
1- 2 layers242.4 × 75.7 mm

Similar boards
- 2 layers243.9 × 136.5 mm

Barobord
sadekbaroudi/barobord
I have spent a lot of time and money designing prototypes, testing, developing, etc. Any contributions would be greatly appreciated!
157 parts57 - 2 layers217.7 × 91.1 mm

- 2 layers298.8 × 122 mm

Ursaminor pcb
markstory/ursa-minor-keyboard
Design and schematics for the ursaminor keyboard
225 parts23 - 2 layers285.5 × 112.1 mm

- 2 layers333.4 × 88.6 mm

Reverie
makenova/reverie
a mini 1800 keyboard based on the Elongate, Clarabelle, and Garbage Truck Keyboards
140 parts14 - 2 layers281.8 × 166.9 mm

Micro redox semi split
makenova/micro_redox
A family of boards inspired by the microdox and ferris
96 parts13 - 2 layers276.2 × 79.8 mm

- 2 layers255.7 × 260.9 mm

Questions
How big is the M3n3van PCB?
It measures 242.3 × 75.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the M3n3van use?
151 parts, built around the ATMEGA32U4-AU and PRTR5V0U2X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the M3n3van KiCad files?
From the matthewdias/m3n3van repository on GitHub, at the commit this page was made from: the board is rev1/m3n3van.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the M3n3van design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).