
V3 Connector + IRLED
PiTracLM/PiTrac
Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)

JP layout 60% mechanical keyboard / prototype
Kana60 is an open-source printed circuit board by sasaplus1, from the sasaplus1/kana60 repository on GitHub, published under the MIT licence. It is a 2-layer board of 285.5 × 115.6 mm with 151 parts on 89 nets, routed with 1,090 tracks and 62 vias.
Its parts include 71 switches, 67 diodes and 1 IC. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
JP layout 60% mechanical keyboard
Keycaps: FILCO FKCS108NMP and another 1 keycap (At bottom of N key).
QMK Firmware: sasaplus1/qmk_firmware
$ ls -1
kana60-acrylic-plates.zip
kana60-sha256sum.txt
kana60-top-plate.zip
kana60.zip
$ shasum --check kana60-sha256sum.txt
kana60-acrylic-plates.zip: OK
kana60.zip: OK
kana60-top-plate.zip: OKremove dist files:
$ make cleangenerate some files:
kana60.kicad_pcb and generate gerber files and drill files, via: plot...kana60-top-plate.kicad_pcb and generate gerber files and drill files, via: plot...kana60-acrylic-plates.kicad_pcb and generate PDF files, via: plot...generate zip files and checksum file:
$ make build create_checksumverify zip files:
$ make info
zipinfo dist/kana60-acrylic-plates/kana60-acrylic-plates.zip
Archive: dist/kana60-acrylic-plates/kana60-acrylic-plates.zip
Zip file size: 22152 bytes, number of entries: 2
-rw-r--r-- 3.0 unx 3150 bx defN 19-Oct-27 17:44 kana60-acrylic-plates-main.pdf
-rw-r--r-- 3.0 unx 20236 bx defN 19-Oct-27 17:44 kana60-acrylic-plates-dimensions.pdf
2 files, 23386 bytes uncompressed, 21742 bytes compressed: 7.0%
zipinfo dist/kana60/kana60.zip
Archive: dist/kana60/kana60.zip
Zip file size: 455650 bytes, number of entries: 9
-rw-r--r-- 3.0 unx 807098 tx defN 19-Oct-27 17:44 kana60.GBL
-rw-r--r-- 3.0 unx 293239 tx defN 19-Oct-27 17:44 kana60.GBS
-rw-r--r-- 3.0 unx 49400 tx defN 19-Oct-27 17:44 kana60.GBO
-rw-r--r-- 3.0 unx 980 tx defN 19-Oct-27 17:44 kana60.GML
-rw-r--r-- 3.0 unx 522285 tx defN 19-Oct-27 17:44 kana60.GTL
-rw-r--r-- 3.0 unx 293239 tx defN 19-Oct-27 17:44 kana60.GTS
-rw-r--r-- 3.0 unx 88481 tx defN 19-Oct-27 17:44 kana60.GTO
-rw-r--r-- 3.0 unx 4210 tx defN 19-Oct-27 17:44 kana60-NPTH.TXT
-rw-r--r-- 3.0 unx 11536 tx defN 19-Oct-27 17:44 kana60.TXT
9 files, 2070468 bytes uncompressed, 454286 bytes compressed: 78.1%
zipinfo dist/kana60-top-plate/kana60-top-plate.zip
Archive: dist/kana60-top-plate/kana60-top-plate.zip
Zip file size: 93042 bytes, number of entries: 9
-rw-r--r-- 3.0 unx 201454 tx defN 19-Oct-27 17:44 kana60-top-plate.GBLpush tag to GitHub and create Release:
$ git tag 1.0
$ git push origin 1.0upload files:
The MIT license.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 67 | D | kicad-footprints:diode | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +51 |
| 57 | SW_PUSH | Keebio-Parts:Hybrid_PCB_100H | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW24 +41 |
| 9 | MountingHole_2.2mm_M2_Pad | MountingHole:MountingHole_2.2mm_M2_Pad | REF1, REF2, REF3, REF4, REF5, REF6, REF7, REF8, REF9 |
| 6 | SW_PUSH | Keebio-Parts:Hybrid_PCB_125H | SW56, SW57, SW58, SW59, SW62, SW63 |
| 4 | SW_PUSH | Keebio-Parts:Hybrid_PCB_200H | SW42, SW43, SW60, SW70 |
| 2 | SW_PUSH | Keebio-Parts:Hybrid_PCB_175H | SW29, SW55 |
| 1 | LOGO | kicad-footprints:sasaplus1-icon-48 | G*** |
| 1 | LOGO | kana60:kana60-title | G*** |
| 1 | LOGO | kicad-footprints:sasaplus1-icon-64 | G*** |
| 1 | ProMicro | Keebio-Parts:ArduinoProMicro | U1 |
| 1 | SW_PUSH | Keebio-Parts:Hybrid_PCB_150H | SW15 |
| 1 | SW_Push | Keebio-Parts:SW_Tactile_SPST_Angled_MJTP1117 | SW71 |

PiTracLM/PiTrac
Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)


cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.




andykarpov/karabas-pro
FPGA based retrocomputer with FDD and HDD controllers

It measures 285.5 × 115.6 mm and has 2 copper layers, 1.6 mm thick.
151 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sasaplus1/kana60 repository on GitHub, at the commit this page was made from: the board is kana60.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).