Skip to the content
2 layersBuck, the printed circuit board in 3D
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
4
Pads
22
Tracks, vias
61, 1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
25 Mar 2025
Updated
28 Mar 2025

Overview

Buck is an open-source printed circuit board by Sanjay-083, from the Sanjay-083/PCB_design repository on GitHub. It is a 2-layer board with 6 parts on 4 nets, routed with 61 tracks and 1 via.

It is built around the LM2596S-12. Its parts include 2 capacitors, 1 IC, 1 diode, 1 connector and 1 inductor. It belongs with the power boards of this library.

Main components

1

README

README.md

View this project on CADLAB.io.

PCB_design

Parts

6
QtyValueFootprintReferences
1220uCapacitor_THT:C_Axial_L5.1mm_D3.1mm_P12.50mm_HorizontalC2
1330uHInductor_SMD:L_0402_1005MetricL1
1680uCapacitor_THT:C_Axial_L5.1mm_D3.1mm_P7.50mm_HorizontalC1
1D_SchottkyDiode_SMD:D_0201_0603MetricD1
1LM2596S-12Package_TO_SOT_SMD:TO-263-5_TabPin3U1
1Screw_TerminalTerminalBlock_Altech:Altech_AK300_1x02_P5.00mm_45-DegreeJ1

More from Sanjay-083/PCB_design

2
  • 2 layers49 × 43 mmIncubator, the printed circuit board in 3D

    Incubator

    Sanjay-083/PCB_design

    17 parts

Similar boards

  • 4 layers80 × 60 mm01 main, the printed circuit board in 3D

    01 main

    wgbowley/OpenLSM

    Low-Cost Linear Synchronous Permanent-Magnet Motor

    99 parts11MIT
  • 2 layers98.8 × 55.1 mmH bridge controller, the printed circuit board in 3D

    H bridge controller

    jayanta525/dual-h-bridge

    Dual H-Bridge Controller with IRF3205 and IR2104 MOSFET Driver, and with ATMega328P-AU PWM Controller

    104 parts5MIT
  • 2 layers5 to 28v, the printed circuit board in 3D

    5 to 28v

    Sussex-Neuroscience/med-associates-bits

    A behavioural box for rodents based on microcontrollers and printed parts

    71 parts1GPL-3.0
  • 2 layers130 × 75 mmAaron, the printed circuit board in 3D

    Aaron

    alcaaron/esi_project

    ENGINYERIA DE SISTEMES: PROJECTE DE CURS Fet per - Aaron Alcalá - Albert Bombí - Marcos García

    64 parts
  • 2 layers100 × 100 mmRiver sampler, the printed circuit board in 3D

    River sampler

    Aquaflowies/Rotatory-Distribution-System

    combinedtests: tests the combined action of the different components. The fullTest() function tests the entire operation of the system.

    99 parts
  • 2 layers80 × 72 mmFountain, the printed circuit board in 3D

    Fountain

    biancanev/fountain-pcb

    41 parts
  • 2 layers74.4 × 73.9 mmBench power supply, the printed circuit board in 3D

    Bench power supply

    HexFud/Bench-power-supply

    I designed a simple and cost effective bench power supply for everyone. To simplify the assmebly process i designed in kicad a small pcb where you connect external components

    31 parts

Questions

What parts does the Buck use?

6 parts, built around the LM2596S-12. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Buck KiCad files?

From the Sanjay-083/PCB_design repository on GitHub, at the commit this page was made from: the board is buck_converter/buck.kicad_pcb and its schematic Boost_converter/Boost_converter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Buck design in my own project?

Its repository states no licence, so its author keeps all rights: ask Sanjay-083 before reusing the design.