4 layers80 × 60 mm
2 layers100 × 100 mm
River sampler
Aquaflowies/Rotatory-Distribution-Systemcombinedtests: tests the combined action of the different components. The fullTest() function tests the entire operation of the system.
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 99
- Nets
- 91
- Pads
- 313
- Tracks, vias
- 651, 30
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 19 Jun 2024
- Updated
- 9 Sep 2024
Overview
River sampler is an open-source printed circuit board by Aquaflowies, from the Aquaflowies/Rotatory-Distribution-System repository on GitHub. It is a 2-layer board of 100 × 100 mm with 99 parts on 91 nets, routed with 651 tracks and 30 vias.
It is built around the ATMEGA328P-PU, LM2596S-12 and LM2596S-5.0, with the TIP120 among its other parts. Its parts include 27 resistors, 23 capacitors, 15 diodes, 9 connectors and 5 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4
ATMEGA328P-PU
DIP-28-300mil-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH DIP-28-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
LM2596S-12
TO-263-5L-20℃~+70℃ 1 12V 170kHz 2mA 3A 4.5V~40V Buck Buck Built-in Fixed No TO-263-5L DC-DC Converters ROHSGRDC-DC ConvertersLM2596S-5.0
TO-263-5-40℃~+125℃@(TJ) 1 150kHz 3A 4.5V~40V 5V 5mA Buck Buck Built-in Fixed No TO-263-5 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
TIP120
TO-220-55℃~+150℃ 200uA 2V@3A,12mA 2W 5A 5V 60V NPN TO-220 Darlington Transistors ROHSJiangsu Changjing Electronics Technology (CJ)Darlington Transistors
README
README.mdRotatory-Distribution-System
combined_tests: tests the combined action of the different components. The fullTest() function tests the entire operation of the system.
unit_tests: used to test the operation of individual components
Parts
99| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 1k | Resistor_SMD:R_1210_3225Metric | R1, R2, R3, R4, R5, R6, R9, R10, R11, R12, R19, R20 |
| 8 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C2, C3, C4, C5, C8, C20, C21, C22 |
| 8 | LED | LED_SMD:LED_1206_3216Metric | D1, D3, D5, D6, D8, D10, D13, D15 |
| 4 | 1N4001 | Diode_SMD:D_SOD-323 | D2, D4, D9, D11 |
| 4 | 200m | Resistor_SMD:R_1206_3216Metric | R7, R8, R17, R18 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2_Pad | H1, H2, H3, H4 |
| 4 | NPN | project_footprints:TO92 | Q2, Q3, Q4, Q5 |
| 4 | Relay_SPDT | project_footprints:RELAY_SRD-05VDC-SL-C | K1, K2, K3, K4 |
| 3 | 10k | Resistor_SMD:R_1206_3216Metric | R16, R21, R25 |
| 2 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C25, C26 |
| 2 | 0.47u | Capacitor_SMD:C_1206_3216Metric | C6, C23 |
| 2 | 100u | Capacitor_SMD:CP_Elec_8x10 | C1, C7 |
| 2 | 1M | Resistor_SMD:R_1218_3246Metric | R13, R22 |
| 2 | 220u | Capacitor_SMD:CP_Elec_6.3x7.7 | C10, C12 |
| 2 | 22p | Capacitor_SMD:C_0603_1608Metric | C17, C18 |
| 2 | 2A | Fuse:Fuse_0603_1608Metric | F1, F2 |
| 2 | 3k | Resistor_SMD:R_1206_3216Metric | R15, R24 |
| 2 | 470u | project_footprints:C_SMD_470uF_12.5Dx13.5L | C9, C11 |
| 2 | 7k | Resistor_SMD:R_1206_3216Metric | R14, R23 |
| 2 | D_Schottky | Diode_THT:D_DO-27_P15.24mm_Horizontal | D12, D14 |
| 2 | L | Inductor_SMD:L_6.3x6.3_H3 | L1, L2 |
| 2 | ~ | project_footprints:IC_TPS61196PWPRQ1 | U2, U5 |
| 1 | 100n | Capacitor_SMD:C_0402_1005Metric | C27 |
| 1 | 10k | Resistor_SMD:R_1210_3225Metric | R26 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C24 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C19 |
| 1 | 16M | Crystal:Crystal_SMD_5032-4Pin_5.0x3.2mm | Y1 |
| 1 | 1k | Resistor_SMD:R_1206_3216Metric | R27 |
| 1 | 24V terminal | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type073_RT02602HBLU_1x02_P5.08mm_Horizontal | J14 |
| 1 | ATmega328P-P | Package_DIP:DIP-28_W7.62mm | U6 |
| 1 | D | Diode_SMD:D_3220_8050Metric | D7 |
| 1 | Flow sense | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type011_RT05503HBWC_1x03_P5.00mm_Horizontal | J12 |
| 1 | Flush Valve | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type011_RT05502HBWC_1x02_P5.00mm_Horizontal | J10 |
| 1 | LM2596S-12 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U4 |
| 1 | LM2596S-5 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U1 |
| 1 | Limit Switch | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type011_RT05502HBWC_1x02_P5.00mm_Horizontal | J4 |
| 1 | Main pump | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type011_RT05504HBWC_1x04_P5.00mm_Horizontal | J5 |
| 1 | TIP120 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | level sense | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type011_RT05503HBWC_1x03_P5.00mm_Horizontal | J6 |
| 1 | lin act | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type011_RT05502HBWC_1x02_P5.00mm_Horizontal | J13 |
| 1 | minipump | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type011_RT05502HBWC_1x02_P5.00mm_Horizontal | J11 |
| 1 | rotary stepper | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type011_RT05504HBWC_1x04_P5.00mm_Horizontal | J3 |
The 97 most common of 99 parts.
Similar boards
- 2 layers130 × 75 mm
Aaron
alcaaron/esi_project
ENGINYERIA DE SISTEMES: PROJECTE DE CURS Fet per - Aaron Alcalá - Albert Bombí - Marcos García
64 parts - 2 layers
- 2 layers
- 4 layers166.4 × 60 mm
- 2 layers165 × 85 mm
TCC Placa 3KG
TCC-Sumo-Telemetria/Eletronica_Sumo_Telemetria
Projetos eletrônicos relacionados ao trabalho de conclusão de curso "SISTEMA DE TELEMETRIA PARA A AVALIAÇÃO DE DESEMPENHO DE UM ROBÔ DE MEGA SUMÔ AUTÔNOMO".
128 parts - 2 layers71.5 × 90 mm
ATmegae Water Controller
OmarAlsai/hydroponic-tomato-controller
An open-source, standalone microcontroller PCB and embedded control system designed to automate water circulation, safety monitoring, and PID-controlled nutrient dosing for hydroponic tomato crops.
23 parts - 2 layers98 × 91.1 mm
Soil Sensor Hub
ArtoLabs/Sensi-pot
Collection of modules for indoor/outdoor gardening automation and environmental control
78 parts3MIT
Questions
How big is the River sampler PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the River sampler use?
99 parts, built around the ATMEGA328P-PU, LM2596S-12, LM2596S-5.0 and TIP120. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the River sampler KiCad files?
From the Aquaflowies/Rotatory-Distribution-System repository on GitHub, at the commit this page was made from: the board is river_sampler_pcb/river_sampler.kicad_pcb and its schematic river_sampler_pcb/5v_relay.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the River sampler design in my own project?
Its repository states no licence, so its author keeps all rights: ask Aquaflowies before reusing the design.