Skip to the content
123345

LM2596S-12

GRExtended

-20℃~+70℃ 1 12V 170kHz 2mA 3A 4.5V~40V Buck Buck Built-in Fixed No TO-263-5L DC-DC Converters ROHS

Part id
gr/LM2596S-12
Category
DC DC Converters
Package
TO-263-5L
Pins
6
In stock
3,050 at JLCPCB (C19631824)
Used on
22 open-source boards

Overview

The LM2596S-12 is a DC DC Converter made by GR in a TO-263-5L package with 5 pins. -20℃~+70℃ 1 12V 170kHz 2mA 3A 4.5V~40V Buck Buck Built-in Fixed No TO-263-5L DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (Regulator_Switching:LM2596S-12, from KiCad's library) and its footprint (Package_TO_SOT_SMD:TO-263-5_TabPin3, from KiCad's library), ready for a KiCad board. 3,050 are in stock at JLCPCB (part C19631824). 22 open-source boards in 22 repositories on GitHub use it.

Symbol

1VIN2OUT3GND4FB5ON/OFF
Regulator_Switching:LM2596S-12From KiCad's library

Footprint

123345
Package_TO_SOT_SMD:TO-263-5_TabPin3From KiCad's library

Pinout

5
The pins of the LM2596S-12
PinNameType
1VINPower in
2OUTOutput
3GNDPower in
4FBInput
5ON/OFFInput

Open-source boards using it

22See all 22
  • 4 layers80 × 60 mm01 main, the printed circuit board in 3D

    01 main

    wgbowley/OpenLSM

    Low-Cost Linear Synchronous Permanent-Magnet Motor

    99 parts11MIT
  • 2 layers98.8 × 55.1 mmH bridge controller, the printed circuit board in 3D

    H bridge controller

    jayanta525/dual-h-bridge

    Dual H-Bridge Controller with IRF3205 and IR2104 MOSFET Driver, and with ATMega328P-AU PWM Controller

    104 parts5MIT
  • 2 layers5 to 28v, the printed circuit board in 3D

    5 to 28v

    Sussex-Neuroscience/med-associates-bits

    A behavioural box for rodents based on microcontrollers and printed parts

    71 parts1GPL-3.0
  • 2 layers130 × 75 mmAaron, the printed circuit board in 3D

    Aaron

    alcaaron/esi_project

    ENGINYERIA DE SISTEMES: PROJECTE DE CURS Fet per - Aaron Alcalá - Albert Bombí - Marcos García

    64 parts
  • 2 layers100 × 100 mmRiver sampler, the printed circuit board in 3D

    River sampler

    Aquaflowies/Rotatory-Distribution-System

    combinedtests: tests the combined action of the different components. The fullTest() function tests the entire operation of the system.

    99 parts
  • 2 layers80 × 72 mmFountain, the printed circuit board in 3D

    Fountain

    biancanev/fountain-pcb

    41 parts
  • 2 layers74.4 × 73.9 mmBench power supply, the printed circuit board in 3D

    Bench power supply

    HexFud/Bench-power-supply

    I designed a simple and cost effective bench power supply for everyone. To simplify the assmebly process i designed in kicad a small pcb where you connect external components

    31 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LM2596S-12?

Yes. The symbol is Regulator_Switching:LM2596S-12 and the footprint Package_TO_SOT_SMD:TO-263-5_TabPin3, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM2596S-12?

TO-263-5L, with 5 pins. Its footprint is drawn on this page.

Where is the LM2596S-12 datasheet?

GR publishes it: the Datasheet link on this page opens it.

Where can I order the LM2596S-12?

JLCPCB lists it as part C19631824, with 3,050 in stock; the sellers' links on this page open their listings.

What can replace the LM2596S-12?

Parts like it in the library: the LM2596S-12(UMW) by UMW, the LM2576S-12(UMW) by UMW, the LM2576S-12/TR by HGSEMI and the LM2596S-12/TR by HGSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM2596S-12?

22 boards in 22 repositories on GitHub; the most starred are listed on this page, with their KiCad files.