2 layers58.4 × 71.1 mm
Automatic Watering System
RayaneGuebre/Automatic-Watering-System
An electronic system that automatically waters your plants every 12 hours
6 parts2
2 layers107.3 × 59.7 mm
PCB diseño
- Size
- 107.3 × 59.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 42
- Pads
- 75
- Tracks, vias
- 140, 9
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 27 Nov 2023
- Updated
- 21 Jun 2025
Overview
TFG is an open-source printed circuit board by salmanbwq, from the salmanbwq/Remote_Control_RF_PCB repository on GitHub. It is a 2-layer board of 107.3 × 59.7 mm with 10 parts on 42 nets, routed with 140 tracks and 9 vias.
It is built around the DFR0654. Its parts include 4 ICs, 1 diode, 1 connector and 1 switch.
Main components
1README
README.mdRemote_Control_RF_PCB
Decripción
En este repositorio se encuentra el diseño de la placa del Control remoto RF/IR/RFID
Los diseños han sido creador a mano y algunos sacados de https://www.snapeda.com/ y https://4dsystems.com.au/
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Antenna | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | AE1 |
| 1 | Conn_01x04 | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J1 |
| 1 | DFR0654 | TFG:MODULE_DFR0654 | U4 |
| 1 | LED | LED_THT:LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm_IRBlack | D1 |
| 1 | LOGO | TFG:Logo-etsisi | G*** |
| 1 | RFID-RC522 | TFG:RFID-RC522 | M1 |
| 1 | SW_DIP_x01 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | SW1 |
| 1 | VS1838B | OptoDevice:Vishay_CAST-3Pin | U2 |
| 1 | ~ | TFG:Battery charger | U3 |
| 1 | ~ | TFG:RF69HCW | U1 |
Similar boards
- 2 layers62 × 87 mm
PCB for the semster project
Bonya0/SPRO2-Group-8
Github repository for Electornics Semester Project 2 Group 8
28 parts - 2 layers
Caspapico
CASPA-PICO/CASPA-PICO-PCB
Schéma électrique du PCB - Ci-joint se trouve les schémas et les explications qui accompagne - Sur le schéma électrique vous trouverez les différents composants - Nous avons travaillé sur une ESP32-E DFR0654 - Pour…
8 parts - 2 layers76.2 × 48.3 mm
Water Board
jtljac/dual-tank-misting-controller
A circuit board and esphome script for a lizard misting system
33 parts - 2 layers61 × 48.3 mm
Firebeetle-2e sm
jtljac/hmis-rfid-lock
A PlatformIO program for RFID based locks using HMIS
17 partsMIT - 2 layers172 × 100.7 mm
- 2 layers98.5 × 119 mm
BRACHIOSAURUS
FelixStA52/BRACHIOSAURUS
Boxed Recorder Analyzing Change in Height of Ice with On Site Accelerometer and Ultrasonic Readers Utilizing Support (BRACHIOSAURUS)
11 parts - 2 layers167 × 82.5 mm
Gps
xDocka15/GNSS_geret
Dokument popisuje zmeny/upravy v elektronike gnss-geret z 2024 tak aby vznikla jednodoskova prenostitelna verzia.
72 parts
Questions
How big is the TFG PCB?
It measures 107.3 × 59.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TFG use?
10 parts, built around the DFR0654. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TFG KiCad files?
From the salmanbwq/Remote_Control_RF_PCB repository on GitHub, at the commit this page was made from: the board is TFG.kicad_pcb and its schematic TFG.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TFG design in my own project?
Its repository states no licence, so its author keeps all rights: ask salmanbwq before reusing the design.