2 layers58.4 × 71.1 mm
Automatic Watering System
RayaneGuebre/Automatic-Watering-System
An electronic system that automatically waters your plants every 12 hours
6 parts2
2 layers
Caspapico
CASPA-PICO/CASPA-PICO-PCBSchéma électrique du PCB - Ci-joint se trouve les schémas et les explications qui accompagne - Sur le schéma électrique vous trouverez les différents composants - Nous avons travaillé sur une ESP32-E DFR0654 - Pour…
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 29
- Pads
- 60
- Tracks, vias
- 76, 4
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 17 May 2022
- Updated
- 24 May 2022
Overview
Caspapico is an open-source printed circuit board by CASPA-PICO, from the CASPA-PICO/CASPA-PICO-PCB repository on GitHub. It is a 2-layer board with 8 parts on 29 nets, routed with 76 tracks and 4 vias.
It is built around the DFR0654. Its parts include 7 connectors and 1 IC.
Main components
1README
README.mdCASPA-PICO-PCB
- Ci-joint se trouve les schémas et les explications qui accompagne
Schéma électrique du PCB
- Ci-joint se trouve les schémas et les explications qui accompagne - Sur le schéma électrique vous trouverez les différents composants - Nous avons travaillé sur une ESP32-E DFR0654 - Pour l'ethernet le composant est un ENC28J60 HR911105A - POLULU REG09b - Ecran OLED
Schéma du PCB
Pour imprimer le PCB sans effectuer de changement vous pouvez directement récupéré le dossier fichiergerberfinax
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4, J5, J7 |
| 2 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J3 |
| 2 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2, J6 |
| 1 | DFR0654 | DFR0654-2:MODULE_DFR0654 | U1 |
Similar boards
- 2 layers62 × 87 mm
PCB for the semster project
Bonya0/SPRO2-Group-8
Github repository for Electornics Semester Project 2 Group 8
28 parts - 2 layers76.2 × 48.3 mm
Water Board
jtljac/dual-tank-misting-controller
A circuit board and esphome script for a lizard misting system
33 parts - 2 layers61 × 48.3 mm
Firebeetle-2e sm
jtljac/hmis-rfid-lock
A PlatformIO program for RFID based locks using HMIS
17 partsMIT - 2 layers172 × 100.7 mm
- 2 layers107.3 × 59.7 mm
- 2 layers98.5 × 119 mm
BRACHIOSAURUS
FelixStA52/BRACHIOSAURUS
Boxed Recorder Analyzing Change in Height of Ice with On Site Accelerometer and Ultrasonic Readers Utilizing Support (BRACHIOSAURUS)
11 parts - 2 layers167 × 82.5 mm
Gps
xDocka15/GNSS_geret
Dokument popisuje zmeny/upravy v elektronike gnss-geret z 2024 tak aby vznikla jednodoskova prenostitelna verzia.
72 parts
Questions
What parts does the Caspapico use?
8 parts, built around the DFR0654. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Caspapico KiCad files?
From the CASPA-PICO/CASPA-PICO-PCB repository on GitHub, at the commit this page was made from: the board is caspapico.kicad_pcb and its schematic caspapico.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Caspapico design in my own project?
Its repository states no licence, so its author keeps all rights: ask CASPA-PICO before reusing the design.