
Firebeetle-2e th
jtljac/hmis-rfid-lock
A PlatformIO program for RFID based locks using HMIS

A PlatformIO program for RFID based locks using HMIS
Firebeetle-2e sm is an open-source printed circuit board by jtljac, from the jtljac/hmis-rfid-lock repository on GitHub, published under the MIT licence. It is a 2-layer board of 61 × 48.3 mm with 17 parts on 34 nets, routed with 53 tracks and 2 vias.
It is built around the DFR0654. Its parts include 5 resistors, 5 connectors, 2 ICs and 1 diode.
A PlatformIO program for a electronic locks that are unlocked using a Wiegand based RFID scanner and authorises users using a HMIS endpoint.
Wiegand readers with keypads are supported. You can configure the valid keycode by setting the enable_keypad_passcode
option to a numeric string up to 8 numbers long.
When using the keypad, the '*' (star) button will clear (provided it maps to 0x0A), and the '#' (Hashtag) button will submit (provided it maps to 0x0B).
This application uses PlatformIO for dependency management and installation. Installation instructions for your platform can be found here.
Configuration options have been exposed in platformio.ini under the [base_config] section.
The WiFi and HMIS options must be configured for your network and HMIS server.
The Unlock and Auth options can be configured to suit your needs.
The Pins options should be configured for your ESP, preferably in a separate section that inherits the [base_config]
section (see the [config_dfrobot_firebeetle2_esp32e] section for an example of this).
The Pin Inversions options should be configured to match your circuit.
A preset environment has been provided for the FireBeetle 2 ESP32-E (my chosen ESP32), you will need to provide your own environment with it's required pin setup if you have a different ESP32 (we welcome PRs for alternative setups).
Run the following to build and upload the project to your ESP32:
# [your-env] should be one of the configured env sections in platformio.ini
pio run -t upload -e [your-env]| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_2.2mm_M2_DIN965_Pad | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | M1, M2, M3, M4 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4 |
| 2 | 3.3k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R5 |
| 1 | 1N5819 | Diode_SMD:D_SOD-123 | D1 |
| 1 | 5k1 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | Button | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | DFR0654 | DFR0654:MODULE_DFR0654 | U1 |
| 1 | Feedback | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | MP1584EN Module | jacob-libs:MP1584EN Module | U2 |
| 1 | Power In | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Relay | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | Wiegand | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |

jtljac/hmis-rfid-lock
A PlatformIO program for RFID based locks using HMIS

RayaneGuebre/Automatic-Watering-System
An electronic system that automatically waters your plants every 12 hours

Bonya0/SPRO2-Group-8
Github repository for Electornics Semester Project 2 Group 8

CASPA-PICO/CASPA-PICO-PCB
Schéma électrique du PCB - Ci-joint se trouve les schémas et les explications qui accompagne - Sur le schéma électrique vous trouverez les différents composants - Nous avons travaillé sur une ESP32-E DFR0654 - Pour…

jtljac/dual-tank-misting-controller
A circuit board and esphome script for a lizard misting system



FelixStA52/BRACHIOSAURUS
Boxed Recorder Analyzing Change in Height of Ice with On Site Accelerometer and Ultrasonic Readers Utilizing Support (BRACHIOSAURUS)

xDocka15/GNSS_geret
Dokument popisuje zmeny/upravy v elektronike gnss-geret z 2024 tak aby vznikla jednodoskova prenostitelna verzia.
It measures 61 × 48.3 mm and has 2 copper layers, 1.6 mm thick.
17 parts, built around the DFR0654. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jtljac/hmis-rfid-lock repository on GitHub, at the commit this page was made from: the board is boards/firebeetle-2e-sm/firebeetle-2e-sm.kicad_pcb and its schematic boards/firebeetle-2e-sm/firebeetle-2e-sm.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).