Bonya0/SPRO2-Group-8Github repository for Electornics Semester Project 2 Group 8
PCB for the semster project is an open-source printed circuit board by Bonya0, from the Bonya0/SPRO2-Group-8 repository on GitHub. It is a 2-layer board of 62 × 87 mm with 28 parts on 44 nets, routed with 192 tracks and 40 vias.
It is built around the DFR0654, CA3140 and SEN0344. Its parts include 10 connectors, 4 resistors, 3 capacitors, 3 ICs and 2 diodes.
This is the github repository for the Electronics Semester Project Group 8.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J11, J13, J14, J15 |
| 3 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2, R3, R4 |
| 3 | LED conectors | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J8, J9 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J17, J18 |
| 2 | D_Zener_Filled | Diode_THT:D_A-405_P7.62mm_Horizontal | D1, D2 |
| 1 | 10nF | Capacitor_THT:C_Rect_L7.0mm_W2.0mm_P5.00mm | C4 |
| 1 | 120 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | 150uF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C3 |
| 1 | 1uF | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C2 |
| 1 | CA3140 | Package_DIP:DIP-8_W7.62mm_LongPads | U3 |
| 1 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J5 |
| 1 | DFR0654 | DFR0654 (1):MODULE_DFR0654 | U2 |
| 1 | LM35-LP | Package_TO_SOT_THT:TO-92L_HandSolder | U1 |
| 1 | SEN0344 | SEN0344:SEN0344 | M1 |
| 1 | SW_Wuerth_450301014042 | Button_Switch_THT:SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW1 |
The 24 most common of 28 parts.
TomaszBartlomowicz/Intelligent-swimming-training-assistant
The objective of this project is to develop a wearable system designed to enhance swimming training. The system provides real-time monitoring of a swimmer's physiological parameters and guides them through a structured…
zeyad-hisham-cyper/Freelance-Projects
A portfolio of embedded systems, PCB design and IoT projects delivered for freelance clients and events, from schematic and PCB layout through firmware to companion mobile apps.
RayaneGuebre/Automatic-Watering-System
An electronic system that automatically waters your plants every 12 hours
CASPA-PICO/CASPA-PICO-PCB
Schéma électrique du PCB - Ci-joint se trouve les schémas et les explications qui accompagne - Sur le schéma électrique vous trouverez les différents composants - Nous avons travaillé sur une ESP32-E DFR0654 - Pour…
jtljac/dual-tank-misting-controller
A circuit board and esphome script for a lizard misting system
jtljac/hmis-rfid-lock
A PlatformIO program for RFID based locks using HMIS
It measures 62 × 87 mm and has 2 copper layers, 1.6 mm thick.
28 parts, built around the DFR0654, CA3140 and SEN0344. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Bonya0/SPRO2-Group-8 repository on GitHub, at the commit this page was made from: the board is hardware/PCB for the semster project/PCB for the semster project.kicad_pcb and its schematic hardware/PCB for the semster project/PCB for the semster project.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Bonya0 before reusing the design.
