
Automatic Watering System
RayaneGuebre/Automatic-Watering-System
An electronic system that automatically waters your plants every 12 hours

A circuit board and esphome script for a lizard misting system
Water Board is an open-source printed circuit board by jtljac, from the jtljac/dual-tank-misting-controller repository on GitHub. It is a 2-layer board of 76.2 × 48.3 mm with 33 parts on 39 nets, routed with 145 tracks and 15 vias.
It is built around the DFR0654, AO3400A and B340A. Its parts include 10 resistors, 7 diodes, 7 connectors, 3 transistors and 2 ICs. It belongs with the home automation and IoT boards of this library.
A circuit board design and ESPHome script for a control board responsible for a misting system for two tanks.
A route from the pump to each tank can be enabled using solenoids attched to their labelled terminals. Powered terminals
will be indicated by an indicator LED, including when the pump is powered.
There are also a header for a Dallas 1-Wire DS18b20 waterproof temperature sensor for measuring the temperature of the water Tank, and a header for a HC-SR04 ultrasonic Distance sensor for use as a water level indicator. The HC-SR04 header has an associate voltage selector header as they're supposed to be 5v but my cheap ones overheated above 3v3.
The board is powered using a 24V DC Barrel Jack and powers the pump and solenoids directly. This design has sized components and traces for 3A, which is generous for the required current for the ESP, pump, and two solenoids.


| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_2.2mm_M2_DIN965_Pad | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | M1, M2, M3, M4 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8, R9 |
| 3 | 1N5819 | Diode_SMD:D_SOD-123 | D1, D2, D3 |
| 3 | 220R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3 |
| 3 | 22R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5, R6 |
| 3 | AO3400A | PCM_Package_TO_SOT_SMD_AKL:SOT-23_BigPads | Q1, Q2, Q3 |
| 3 | Green | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4, D5, D6 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | B340A | PCM_Diode_SMD_Handsoldering_AKL:D_SMA_BigPads | D7 |
| 1 | Barrel_Jack | jacob-libs:BarrelJack_XKB_5A | J7 |
| 1 | DFR0654 | DFR0654:MODULE_DFR0654 | U1 |
| 1 | MP1584EN Module | jacob-libs:MP1584EN Module | U2 |
| 1 | Pump Header | jacob-libs:TerminalBlock_MAX_MX127-5.0-02P_1x02_P5.00mm | J1 |
| 1 | Tank 1 Header | jacob-libs:TerminalBlock_MAX_MX127-5.0-02P_1x02_P5.00mm | J2 |
| 1 | Tank 2 Header | jacob-libs:TerminalBlock_MAX_MX127-5.0-02P_1x02_P5.00mm | J3 |
| 1 | Water Level Header | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Water Level Voltage Selector | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | Water Temp Header | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |

RayaneGuebre/Automatic-Watering-System
An electronic system that automatically waters your plants every 12 hours

Bonya0/SPRO2-Group-8
Github repository for Electornics Semester Project 2 Group 8

CASPA-PICO/CASPA-PICO-PCB
Schéma électrique du PCB - Ci-joint se trouve les schémas et les explications qui accompagne - Sur le schéma électrique vous trouverez les différents composants - Nous avons travaillé sur une ESP32-E DFR0654 - Pour…

jtljac/hmis-rfid-lock
A PlatformIO program for RFID based locks using HMIS



FelixStA52/BRACHIOSAURUS
Boxed Recorder Analyzing Change in Height of Ice with On Site Accelerometer and Ultrasonic Readers Utilizing Support (BRACHIOSAURUS)

xDocka15/GNSS_geret
Dokument popisuje zmeny/upravy v elektronike gnss-geret z 2024 tak aby vznikla jednodoskova prenostitelna verzia.
It measures 76.2 × 48.3 mm and has 2 copper layers, 1.6 mm thick.
33 parts, built around the DFR0654, AO3400A and B340A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jtljac/dual-tank-misting-controller repository on GitHub, at the commit this page was made from: the board is Circuit/V1/Water Board.kicad_pcb and its schematic Circuit/V1/Water Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jtljac before reusing the design.