
V3 Connector + IRLED
PiTracLM/PiTrac
Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)

A 65% mechanical keyboard I'm building for Hack Club KEEB, with a rotary encoder, hotswap switches, RGB, and an OLED.
Dream Keyboard is an open-source printed circuit board by rushabh69, from the rushabh69/Dream-Keyboard repository on GitHub. It is a 2-layer board of 320 × 152 mm with 151 parts on 100 nets, routed with 861 tracks and 24 vias.
Its parts include 72 diodes, 67 switches, 6 capacitors, 2 resistors and 2 ICs. It belongs with the keyboards and input boards and the RP2040 boards of this library.
A 65% mechanical keyboard I'm building for Hack Club KEEB, with a rotary encoder, hotswap switches, RGB, and an OLED.
The PCB is in pcb/ (KiCad), the case in case/ (Onshape), and the
firmware config in firmware/keyboard.toml. I'm keeping the
build log in JOURNAL.md as I go.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 67 | D | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +51 |
| 67 | SW_Push | PCM_marbastlib-mx:SW_MX_1u | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +51 |
| 6 | C_0805_2012Metric | C_0805_2012Metric | C101, C102, C103, C104, C105, C106 |
| 5 | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | D101, D102, D103, D104, D105 |
| 2 | R_0805_2012Metric | R_0805_2012Metric | R1, R2 |
| 1 | PinHeader_1x04_P2.54mm_Vertical | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | RaspberryPi_Pico_Common_THT | Module:RaspberryPi_Pico_Common_THT | U1 |
| 1 | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | ENC1 |
| 1 | SOIC-14_3.9x8.7mm_P1.27mm | SOIC-14_3.9x8.7mm_P1.27mm | U2 |

PiTracLM/PiTrac
Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)


cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.




andykarpov/karabas-pro
FPGA based retrocomputer with FDD and HDD controllers

It measures 320 × 152 mm and has 2 copper layers, 1.6 mm thick.
151 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rushabh69/Dream-Keyboard repository on GitHub, at the commit this page was made from: the board is pcb/dream-keyboard/dream-keyboard.kicad_pcb and its schematic pcb/dream-keyboard/dream-keyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask rushabh69 before reusing the design.