4 layers33.1 × 64.7 mm
2 layers10 × 8 mm
LEDeye2
runger1101001/LEDeye2- Size
- 10 × 8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 8
- Pads
- 33
- Tracks, vias
- 65, 7
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 23 Oct 2021
- Updated
- 23 Oct 2021
Overview
LEDeye2 is an open-source printed circuit board by runger1101001, from the runger1101001/LEDeye2 repository on GitHub. It is a 2-layer board of 10 × 8 mm with 11 parts on 8 nets, routed with 65 tracks and 7 vias.
It is built around the VL53L1X. Its parts include 3 resistors, 3 connectors, 2 capacitors, 1 IC and 1 diode.
Main components
1Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10kΩ | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | IO | Connector_PinHeader_1.27mm:PinHeader_1x01_P1.27mm_Vertical | J1, J2 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 4.7kΩ | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 4.7µF | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | I2C | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J6 |
| 1 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H1 |
| 1 | VL53L1 | runger:VL53L1 | U1 |
| 1 | green | LED_SMD:LED_0402_1005Metric | D1 |
Questions
How big is the LEDeye2 PCB?
It measures 10 × 8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LEDeye2 use?
11 parts, built around the VL53L1X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LEDeye2 KiCad files?
From the runger1101001/LEDeye2 repository on GitHub, at the commit this page was made from: the board is LEDeye2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LEDeye2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask runger1101001 before reusing the design.
Similar boards
- 2 layers76 × 70.3 mm
Module
valerionew/53xLIDAR
53xLIDAR is a solid state, 16 points lidar, based on ST's VL53L1x sensors
294 parts11 - 2 layers48.4 × 21.7 mm
Panel
CloudyPadmal/CrazyFlieToFDeck
This repository contains KiCAD source files and generated gerber files for CrazyFlie Obstacle Avoidance Sensor Deck.
75 parts4 - 2 layers86 × 85 mm
- 4 layers38 × 74 mm
Stratosdrone
equationstratos/STRATOSDRONES
A 4-layer, 36×70 mm Tello-style portrait controller board for the STRATOSDRONE: chip-down ESP32-P4 (flight + camera + hardware H.264) with an ESP32-C6-MINI-1 Wi-Fi co-processor, IMU / barometer / ToF / optical-flow…
115 parts - 4 layers48 × 52 mm
Cube
Honzaaa45/cube-hologram-pcb
Carte electronique d'un afficheur holographique Pepper's Ghost : CAO KiCad 4 couches entierement generee par du code et verifiee automatiquement
63 partsMIT - 2 layers180 × 56 mm
DBT 4.0
MaxJ02/Death_By_Table
Code for the autonomous RC-car "Death_By_Table", which competed in the YRGO Grand Prix 2023. The code is written for the Arduino Nano which uses the Atmega328p microcontroller.
16 partsMIT - 2 layers70 × 50 mm
