8 layers63.5 × 93.3 mm
Pmc
7134956/phobia-pcb
This repository contains schematic and printed circuit board design files of the PMC. There is KiCad project. Refer to the PMC repository for details.
174 parts
8 layers82.6 × 55.2 mm
Phobia PCB design files
- Size
- 82.6 × 55.2 mm
- Copper layers
- 8
- Thickness
- 1.6 mm
- Parts
- 165
- Nets
- 120
- Pads
- 539
- Tracks, vias
- 1,494, 863
- Pours
- 106
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 4 Mar 2023
- Updated
- 4 Mar 2023
Overview
Pmc is an open-source printed circuit board by rombrew, from the rombrew/phobia-pcb repository on GitHub. It is an 8-layer board of 82.6 × 55.2 mm with 165 parts on 120 nets, routed with 1,494 tracks and 863 vias.
It is built around the STM32F405RGT6, SN65HVD256D and UCC27211AD, with the LM5164DDA, TPS61040DBV and AD8539ARZ among its other parts. Its parts include 66 capacitors, 60 resistors, 9 connectors, 7 transistors and 4 ICs. It belongs with the robots and motor control boards and the STM32 boards of this library.
Main components
10
STM32F405RGT6
LQFP-64(10x10)-40℃~+85℃ 1.8V~3.6V 12bit 12bit 168MHz 192KB 1MB 32 Bit 51 ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
SN65HVD256D
SOIC-8-40℃~+125℃ 1Mbps 5V 5mA 85mA CAN Transceiver SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN Transceivers
UCC27211AD
--40℃~+140℃ 1.3V~1.9V 1.9V~2.7V 2 4A 4A 5.5ns 7.2ns 85uA 8V~17V Low Side、High Side MOSFET Under Voltage Protection - Gate Drivers ROHSTexas InstrumentsGate Drivers
LM5164DDA
SOIC8100-V Input, 1-A Synchronous Buck DC/DC Converter with Ultra-low IQTexas InstrumentsUncategorised
TPS61040DBV
SOT-23-5-40℃~+125℃@(TJ) 1 1.8V~6V 1MHz 28V 28uA 400mA Adjustable Boost Boost Built-in No Overcurrent Protection、Light load efficient mode SOT-23-5 DC-DC Converters ROHSTexas InstrumentsLED DriversAD8539ARZ
SOIC-8-2.5V~-1.35V、1.35V~2.5V -40℃~+125℃ 0.4V/us 115dB 15pA 170uA 2 2.7V~5.5V 20pA 25mA 30nV/℃ 430kHz 52nV/√Hz@1kHz 5uV Reverse-phase input protection SOIC-8 Precision Op Amps ROHSAnalog DevicesPrecision Op Amps
1N4448WS
SOD-323-65℃~+150℃@(Tj) 1.25V@150mA 2.5uA@75V 200mW 250mA 4A 4ns 75V Independent SOD-323 Switching Diodes ROHSDiodes IncorporatedSwitching Diodes
IRLML6401
SOT-23-55℃~+150℃ 1 P-Channel 1.3W 125pF 12V 15nC@5V 180pF 4.3A 830pF 85mΩ@1.8V 950mV P-Channel SOT-23 MOSFETs ROHSKEXINMOSFETsNSR0320MW2
SOD-323-55℃~+125℃ 1 Independent 1A 20V 500mV@900mA 50uA@15V 5A SOD-323 Schottky Diodes ROHSonsemiSchottky DiodesTPS73633DBV
SOT-23-5-40℃~+125℃@(Tj) 1 3.3V 30uVrms 400mA 5.5V 550uA 58dB@(10kHz) 75mV@(400mA) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Reverse-polarity current protection、Noise bypass terminal Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdThis repository contains schematic and printed circuit board design files of the PMC. There is KiCad project. Refer to the PMC repository for details.
Parts
165| Qty | Value | Footprint | References |
|---|---|---|---|
| 23 | 0.1uF 25v | foot:SM-0603 | C4, C14, C16, C18, C25, C27, C32, C33, C34, C35, C36, C40, C42, C44, C48, C50 +7 |
| 11 | 1K | foot:SM-0603 | R5, R6, R23, R24, R25, R28, R29, R30, R31, R32, R46 |
| 11 | 330 | foot:SM-0603 | R4, R14, R15, R16, R17, R18, R19, R20, R21, R26, R27 |
| 9 | 0.01uF 25v | foot:SM-0603 | C7, C8, C20, C28, C29, C30, C37, C38, C65 |
| 7 | 470K 1% | foot:SM-0603 | R48, R49, R50, R51, R56, R57, R58 |
| 6 | 10K 1% | foot:SM-0603 | R2, R33, R34, R35, R36, R59 |
| 6 | 2 | foot:SM-0603 | R37, R38, R39, R40, R41, R42 |
| 6 | IPT010N08NM5 | foot:PG-HSOF-8 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 5 | 1uF 25v | foot:SM-0805 | C17, C41, C43, C45, C60 |
| 5 | 4.7uF 16v | foot:SM-0805 | C2, C23, C24, C26, C31 |
| 5 | PAD4 | foot:PLS-1 | N1, N2, N3, N4, N5 |
| 4 | 1nF C0G | foot:SM-0603 | C61, C62, C63, C64 |
| 4 | 22K 1% | foot:SM-0603 | R52, R53, R54, R55 |
| 4 | 4.7uF 100v | foot:SM-1210 | C53, C54, C55, C56 |
| 3 | 10K | foot:SM-0603 | R9, R12, R13 |
| 3 | 4.7uF 25v | foot:SM-0805 | C47, C49, C51 |
| 3 | UCC27211A | foot:SON-8 | M5, M6, M7 |
| 2 | 0.0005 1% | foot:LR2512-4 | R43, R44 |
| 2 | 1 | foot:SM-0603 | R3, R22 |
| 2 | 100K 1% | foot:SM-0603 | R7, R10 |
| 2 | 12pF | foot:SM-0603 | C9, C13 |
| 2 | 180pF | foot:SM-0603 | C15, C19 |
| 2 | 2.2uF 100v | foot:SM-1210 | C1, C3 |
| 2 | 47uF 10v | foot:SM-1210 | C21, C22 |
| 2 | 680uF 63v | foot:CE-135 | C39, C46 |
| 2 | AD8418 | foot:SOIC-8 | U1, U2 |
| 2 | AD8539 | foot:MSOP-8 | U3, U4 |
| 1 | 0.1uF 100v | foot:SM-0805 | C5 |
| 1 | 10K NTC | foot:SM-0805 | R60 |
| 1 | 10uF 25v | foot:SM-1210 | C10 |
| 1 | 10uH | foot:COIL-3 | L1 |
| 1 | 12 MHz | foot:SM-Z3225 | Z1 |
| 1 | 13.7K 1% | foot:SM-0603 | R8 |
| 1 | 15K | foot:SM-0603 | R1 |
| 1 | 1N4448WS | foot:SM-0805 | D3 |
| 1 | 2.2nF 50v | foot:SM-0805 | C11 |
| 1 | 22uH | foot:COIL-8 | L2 |
| 1 | 31.5K 1% | foot:SM-0603 | R11 |
| 1 | 470 | foot:SM-1206 | R47 |
| 1 | 47K | foot:SM-0603 | R45 |
| 1 | ANALOG | foot:PLS-4 | P6 |
| 1 | CAN | foot:PLS-2 | P9 |
| 1 | FAN | foot:PLS-2 | P7 |
| 1 | HALL | foot:PLS-5 | P3 |
| 1 | IRLML6401 | foot:SOT-23 | Q7 |
| 1 | LED | foot:SM-0603 | D1 |
| 1 | LM5164 | foot:PDSO-8 | M2 |
| 1 | NSR0320 | foot:SM-0805 | D2 |
| 1 | NTC | foot:PLS-2 | P8 |
| 1 | PPM | foot:PLS-4 | P5 |
| 1 | SN65HVD256 | foot:SOIC-8 | M8 |
| 1 | SPI | foot:PLS-6 | P4 |
| 1 | STM32F405RG | foot:LQFP-64 | M3 |
| 1 | SWD | foot:PLS-2 | P2 |
| 1 | TPS61040 | foot:SOT-23-5 | M1 |
| 1 | TPS73633 | foot:SOT-23-5 | M4 |
| 1 | USART | foot:PLS-4 | P1 |
Questions
How big is the Pmc PCB?
It measures 82.6 × 55.2 mm and has 8 copper layers, 1.6 mm thick.
What parts does the Pmc use?
165 parts, built around the STM32F405RGT6, SN65HVD256D, UCC27211AD and LM5164DDA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pmc KiCad files?
From the rombrew/phobia-pcb repository on GitHub, at the commit this page was made from: the board is pmc.kicad_pcb and its schematic pmc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pmc design in my own project?
Its repository states no licence, so its author keeps all rights: ask rombrew before reusing the design.
Similar boards
- 2 layers68 × 32 mm
IC2E ESC S50 DualSpool v1
AVIUS001/ic2e-esc-design-journey-public
Public-safe Aerial8/IC2E ESC design-journey overview (no manufacturable IP)
13 parts - 2 layers42 × 30 mm
- 4 layers57.4 × 51.4 mm
- 4 layers78 × 78 mm
- 2 layers88.5 × 71.5 mm
MSolarWeather
cfdev/mSolarWeather
This project use the SparkFun weather meter kit and other sensors
96 parts1MIT - 4 layers53.2 × 138.8 mm
- 4 layers259.1 × 13.5 mm
