4 layers53.2 × 138.8 mm
4 layers259.1 × 13.5 mm
MagicStick
Kreyl/MagicStick...Because MagicWand is cursed.
- Size
- 259.1 × 13.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 113
- Nets
- 82
- Pads
- 362
- Tracks, vias
- 4,962, 159
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Dec 2018
- Updated
- 26 May 2020
Overview
MagicStick is an open-source printed circuit board by Kreyl, from the Kreyl/MagicStick repository on GitHub. It is a 4-layer board of 259.1 × 13.5 mm with 113 parts on 82 nets, routed with 4,962 tracks and 159 vias.
It is built around the CC1101RGP, MMBT2222 and BLM15AG102SN1, with the NSR0320MW2, IRLML6401 and LSM6DS3 among its other parts. Its parts include 38 capacitors, 31 resistors, 12 transistors, 5 inductors and 4 diodes. It belongs with the STM32 boards of this library.
Main components
7
CC1101RGP
QFN-20-EP(4x4)-116dBm -40℃~+85℃ 1.8V~3.6V 12.3mA 12dBm 14.3mA 600Kbps ISM SPI QFN-20-EP(4x4) RF Transceiver ICs ROHSTexas InstrumentsRF Transceiver ICs
MMBT2222
SOT-231 NPN 1uA 300mV 300mW 400 40V 600mA 6V NPN SOT-23 Bipolar (BJT) ROHSYONGYUTAIBipolar (BJT)
BLM15AG102SN1
04021 1kΩ@100MHz 300mA 650mΩ ±25% 0402 Ferrite Beads ROHSMurataFerrite Beads
NSR0320MW2
SOD-323-55℃~+125℃ 1 Independent 1A 20V 500mV@900mA 50uA@15V 5A SOD-323 Schottky Diodes ROHSonsemiSchottky DiodesIRLML6401
SOT-23-55℃~+150℃ 1 P-Channel 1.3W 125pF 12V 15nC@5V 180pF 4.3A 830pF 85mΩ@1.8V 950mV P-Channel SOT-23 MOSFETs ROHSKEXINMOSFETs
LSM6DS3
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 8KB Accelerometer Gyroscope SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps LGA-14(2.5x3) Accelerometers ROHSSTMicroelectronicsAccelerometers
TP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery Management
Parts
113| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 0.1u | Capacitors:CAP_0603 | C9, C10, C11, C12, C13, C14, C16, C17, C19, C21, C26, C27, C28, C29, C36 |
| 9 | 10u | Capacitors:CAP_0603 | C3, C4, C8, C15, C23, C24, C25, C30, C31 |
| 9 | MMBT2222 | SOT:SOT23-3 | Q1, Q3, Q4, Q5, Q8, Q9, Q10, Q11, Q12 |
| 7 | 1R0 | Resistors:RES_0805 | R4, R19, R20, R25, R26, R30, R31 |
| 7 | 510R | Resistors:RES_0603 | R2, R15, R16, R23, R24, R28, R29 |
| 5 | 1u | Capacitors:CAP_0603 | C7, C18, C20, C32, C33 |
| 4 | 100k | Resistors:RES_0603 | R3, R7, R21, R22 |
| 4 | 18pF | Capacitors:CAP_0603 | C5, C6, C34, C35 |
| 4 | 1k | Resistors:RES_0603 | R5, R13, R18, R27 |
| 4 | CONN_1 | PCB:Oval3x1.5 | XL2, XL3, XL7, XL8 |
| 3 | 10k | Resistors:RES_0603 | R6, R10, R11 |
| 3 | 10n | Capacitors:CAP_0603 | C1, C2, C22 |
| 3 | BLM15AG102SN1 | Inductors:IND_0402 | L1, L2, L3 |
| 2 | * | Capacitors:CAP_0402 | C37, C38 |
| 2 | 56k | Resistors:RES_0603 | R14, R17 |
| 2 | LED_RGB_6PIN_PAD | LEDs:EpistarRGB | Q6, Q7 |
| 2 | NSR0320 | Diodes:SOD323 | D1, D3 |
| 2 | TESTPOINT | PCB:TESTPOINT_1MM | TP1, TP2 |
| 1 | * | Inductors:IND_0402 | L5 |
| 1 | 0R1 | Resistors:RES_1206 | R9 |
| 1 | 0R2 | Resistors:RES_1206 | R8 |
| 1 | 12MHz | Quartz:03225C4 | XTAL1 |
| 1 | 1M | Resistors:RES_0603 | R1 |
| 1 | 2.2uH | Inductors:IND_SRN2512 | L4 |
| 1 | 27MHz | Quartz:03225C4 | XTAL2 |
| 1 | 4k7 | Resistors:RES_0603 | R12 |
| 1 | ANT_PCB_MONO | Antennas:MagicStick | ANT1 |
| 1 | BALUN868JOHANSON | Radio:BALUN_JOHANSON868 | BLN1 |
| 1 | BUTTON | BtnsSwitches:BTN_4x4_SMD | SW1 |
| 1 | CC1101 | QFN_DFN:QFN20 | DD4 |
| 1 | CONN_2 | Connectors:PBS-2 | XL5 |
| 1 | CONN_6 | Connectors:PLS-6-NoHole | XL1 |
| 1 | EEPROM_I2C | SO_DIL_TSSOP:SO8_150MIL | DD3 |
| 1 | IRLML6401 | SOT:SOT23-3 | Q2 |
| 1 | LED | LEDs:Cree_J3030 | D2 |
| 1 | LED | LEDs:LED_0603 | D4 |
| 1 | LSM6DS3 | LGA:14_3x2d5_p0d5 | DD2 |
| 1 | Logo | Pictures:Ostranna_8x8 | Logo1 |
| 1 | MCP1700 | SOT:SOT23-3A | DA3 |
| 1 | MOTOR_NO_CONTACTS | Installation:Motor_no_Contacts | M1 |
| 1 | ST1CC40_SO8 | SO_DIL_TSSOP:SO8_150MIL | DA1 |
| 1 | STM32L433Cx | LQFP_TQFP:LQFP48 | DD1 |
| 1 | TP4056 | SO_DIL_TSSOP:SO8_150MIL | DA2 |
| 1 | USB_MICRO | Connectors:USBmicro_MOLEX_1050170001 | XL4 |
Questions
How big is the MagicStick PCB?
It measures 259.1 × 13.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the MagicStick use?
113 parts, built around the CC1101RGP, MMBT2222, BLM15AG102SN1 and NSR0320MW2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MagicStick KiCad files?
From the Kreyl/MagicStick repository on GitHub, at the commit this page was made from: the board is MagicStick_hw/MagicStick.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MagicStick design in my own project?
Its repository states no licence, so its author keeps all rights: ask Kreyl before reusing the design.
Similar boards
- 4 layers18 × 96 mm
- 4 layers115.5 × 14.4 mm
- 4 layers310.5 × 21.4 mm
- 4 layers60.8 × 64.8 mm
- 4 layers21.6 × 401 mm
- 4 layers118 × 21.4 mm
- 4 layers88.2 × 61.4 mm
