Skip to the content
12345

TPS61040DBV

Texas InstrumentsJLCPCB preferred

-40℃~+125℃@(TJ) 1 1.8V~6V 1MHz 28V 28uA 400mA Adjustable Boost Boost Built-in No Overcurrent Protection、Light load efficient mode SOT-23-5 DC-DC Converters ROHS

Part id
ti/TPS61040DBV
Category
LED Drivers
Package
SOT-23-5
Pins
5
In stock
22,126 at JLCPCB (C7722)
Used on
47 open-source boards

Overview

The TPS61040DBV is a LED Driver made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+125℃@(TJ) 1 1.8V~6V 1MHz 28V 28uA 400mA Adjustable Boost Boost Built-in No Overcurrent Protection、Light load efficient mode SOT-23-5 DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (Regulator_Switching:TPS61040DBV, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 22,126 are in stock at JLCPCB (part C7722). 47 open-source boards in 38 repositories on GitHub use it.

Symbol

1SW2GND3FB4EN5VIN
Regulator_Switching:TPS61040DBVFrom KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

From the datasheet

13
Supply, least
1.8 V · VIN, recommended operating min · p. 4
Supply, most
6 V · VIN, recommended operating max · p. 4
Supply, absolute maximum
7 V · VIN, absolute max · p. 4
Works from
-40 °C · Operating ambient temperature min · p. 4
Works up to
85 °C · Operating ambient temperature max · p. 4
Junction, hottest
150 °C · Junction temperature absolute max · p. 4
Takes working
28 µA · VIN quiescent current typical, IOUT = 0mA, not switching, VFB = 1.3V · p. 5
Takes asleep
100 nA · Shutdown current typical, EN = GND · p. 5
Current limit
400 mA · MOSFET current limit typical, TPS61040 · p. 5
Feedback reference
1.233 V · Internal voltage reference typical · p. 5
Junction to air (DBV)
205.2 K/W · Junction-to-ambient thermal resistance · p. 4
Junction to case (DBV)
118.3 K/W · Junction-to-case top thermal resistance · p. 4
Junction to board (DBV)
34.8 K/W · Junction-to-board thermal resistance · p. 4

What it is and has

6
Input voltage range
1.8V to 6V · p. 1
Output voltage
Adjustable up to 28V · p. 1
Switching frequency
Up to 1MHz · p. 1
Soft start
Internal · p. 1
Protection
Undervoltage lockout, typical threshold 1.5V · p. 10
Protection
Thermal shutdown, typical threshold 168°C, typical hysteresis 25°C · p. 10

Around it

3
cap 4.7 μF
between VIN and GND; Nominal recommended input capacitor; see application section. · p. 4
cap 1 μF
between VOUT and GND; Minimum recommended output capacitor; see application section. · p. 4
ind 10 μH
between VIN and SW; Nominal recommended inductor; minimum 2.2 uH; see application section. · p. 4

Specifications

39
ParameterConditionsAs printedPage
Supply voltages on pin VINOver operating free-air temperature range; with respect to network ground terminalmin -0.3 · max 7 V4
Voltages on pins EN, FBWith respect to network ground terminal; maximum VIN + 0.3 Vmin -0.3 V4
Switch voltage on pin SWWith respect to network ground terminalmin -0.3 · max 30 V4
Operating junction temperature TJmin -40 · max 150 °C4
Storage temperature Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001; ±2000 V ratingmax 2000 V4
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22C101; ±750 V ratingmax 750 V4
Input voltage range VINmin 1.8 · max 6 V4
Output voltage range VOUTmax 28 V4
Inductor LSee application section; typ field represents NOMmin 2.2 · typ 10 uH4
Switching frequency fSee application sectionmax 1 MHz4
Input capacitor CINSee application section; typ field represents NOMtyp 4.7 uF4
Output capacitor COUTSee application sectionmin 1 uF4
Operating ambient temperature TAmin -40 · max 85 °C4
Operating junction temperature TJmin -40 · max 125 °C4
Junction-to-ambient thermal resistance RθJATPS61040, DBV, 5 PINStyp 205.2 °C/W4
Junction-to-case (top) thermal resistance RθJC(top)TPS61040, DBV, 5 PINStyp 118.3 °C/W4
Junction-to-board thermal resistance RθJBTPS61040, DBV, 5 PINStyp 34.8 °C/W4
Junction-to-top characterization parameter ψJTTPS61040, DBV, 5 PINStyp 12.2 °C/W4
Junction-to-board characterization parameter ψJBTPS61040, DBV, 5 PINStyp 33.9 °C/W4
Input voltage range VINEN = VIN, TA = –40°C to 85°Cmin 1.8 · max 6 V5
Operating quiescent current IQVIN = 2.4V, EN = VIN, TA = –40°C to 85°C; typical at 25°C; IOUT = 0mA, not switching, VFB = 1.3Vtyp 28 · max 50 uA5
Shutdown current ISDVIN = 2.4V, EN = GND, TA = –40°C to 85°C; typical at 25°Ctyp 0.1 · max 1 uA5
Undervoltage lockout threshold VUVLOEN = VIN, TA = –40°C to 85°C; typical at 25°Ctyp 1.5 · max 1.7 V5
EN high level input voltage VIHVIN = 2.4V, TA = –40°C to 85°Cmin 1.3 V5
EN low level input voltage VILVIN = 2.4V, TA = –40°C to 85°Cmax 0.4 V5
EN input leakage current IIVIN = 2.4V, EN = GND or VIN, TA = –40°C to 85°C; typical at 25°Ctyp 0.1 · max 1 uA5
Maximum switch voltage VswVIN = 2.4V, EN = VIN, TA = –40°C to 85°Cmax 30 V5
Minimum off time toffVIN = 2.4V, EN = VIN, TA = –40°C to 85°C; typical at 25°Cmin 250 · typ 400 · max 550 ns5
Maximum on time tonVIN = 2.4V, EN = VIN, TA = –40°C to 85°C; typical at 25°Cmin 4 · typ 6 · max 7.5 us5
MOSFET on-resistance RDS(on)VIN = 2.4V; ISW = 200mA; TPS61040; EN = VIN, TA = –40°C to 85°C; typical at 25°Ctyp 600 · max 1000 mΩ5
MOSFET leakage currentVSW = 28V; VIN = 2.4V, EN = VIN, TA = –40°C to 85°C; typical at 25°Ctyp 1 · max 10 uA5
MOSFET current limit ILIMTPS61040; VIN = 2.4V, EN = VIN, TA = –40°C to 85°C; typical at 25°Cmin 350 · typ 400 · max 450 mA5
Adjustable output voltage range VOUTMinimum VIN; EN = VIN, TA = –40°C to 85°Cmax 28 V5
Internal voltage reference VrefVIN = 2.4V, EN = VIN; typical at TA = 25°Ctyp 1.233 V5
Feedback input bias current IFBVFB = 1.3V; VIN = 2.4V, EN = VIN, TA = –40°C to 85°Cmax 1 uA5
Feedback trip point voltage VFB1.8V ≤ VIN ≤ 6V; EN = VIN, TA = –40°C to 85°C; typical at 25°Cmin 1.208 · typ 1.233 · max 1.258 V5
Line regulation1.8V ≤ VIN ≤ 6V; VOUT = 18V; Iload = 10mA; CFF = not connected; EN = VIN; typical at TA = 25°Ctyp 0.05 %/V5
Load regulationVIN = 2.4V; VOUT = 18V; 0mA ≤ IOUT ≤ 30mA; EN = VIN; typical at TA = 25°Ctyp 0.15 %/mA5

Pins, by the datasheet

5
1 SW
Switch pin connected to the internal power MOSFET drain; connect the inductor and Schottky diode here. · p. 3
2 GND
Ground. · p. 3
3 FB
Connect to the external voltage divider to program the desired output voltage. · p. 3
4 EN
Enable input; pull to ground for shutdown. Must be terminated and must not float. · p. 3
5 VIN
Supply voltage pin. · p. 3

Open-source boards using it

47See all 47
  • 4 layers95 × 55.5 mmEinkPDA keyboard, the printed circuit board in 3D

    EinkPDA keyboard

    TalismanDesign/PocketMage_PDA

    An E-Ink PDA device using the ESP32 S3.

    137 parts2kApache-2.0
  • 4 layers68.6 × 53.3 mmDsi shield, the printed circuit board in 3D

    Dsi shield

    twlostow/dsi-shield

    Arduino MIPI DSI Shield

    224 parts524LGPL-3.0
  • 4 layers121.9 × 109.2 mmPlinkyblack hwmidi jacks, the printed circuit board in 3D

    Plinkyblack hwmidi jacks

    plinkysynth/plinky_public

    a public release of the plinky sw and hw

    300 parts227
  • 4 layers88 × 30 mmOled nametag, the printed circuit board in 3D

    Oled nametag

    TobleMiner/oled-nametag

    A ESP32-based OLED nametag

    123 parts54CERN-OHL-P-2.0
  • 2 layers100 × 70 mmRTD2662Board, the printed circuit board in 3D

    RTD2662Board

    KerJoe/RTD2662Board

    Prototype board for RTD2662 display controller

    259 parts24
  • 2 layers85.5 × 70 mmV0-Replay-26 PCB A, the printed circuit board in 3D

    V0-Replay-26 PCB A

    temporal-community/badge.temporal.io

    Open-source firmware, hardware files, docs, and community app registry for the Temporal Replay 2026 Badge.

    211 parts8MIT
  • 8 layers82.6 × 55.2 mmPmc, the printed circuit board in 3D

    Pmc

    rombrew/phobia-pcb

    Phobia PCB design files

    165 parts7
  • 4 layers82 × 70 mmTemporal Badge CHARLIE, the printed circuit board in 3D

    Temporal Badge CHARLIE

    Architeuthis-Flux/Temporal-Replay-26-Badge

    Community firmware for the Temporal Replay 26 badge

    208 parts5Unlicense

Questions

Is there a KiCad symbol and footprint for the TPS61040DBV?

Yes. The symbol is Regulator_Switching:TPS61040DBV and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS61040DBV?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the TPS61040DBV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS61040DBV?

JLCPCB lists it as part C7722, with 22,126 in stock; the sellers' links on this page open their listings.

Which open-source boards use the TPS61040DBV?

47 boards in 38 repositories on GitHub; the most starred are listed on this page, with their KiCad files.