
Plinkyblack hwmidi jacks
plinkysynth/plinky_public
a public release of the plinky sw and hw

a public release of the plinky sw and hw
Plinkyblack hwmidi jacks is an open-source printed circuit board by plinkysynth, from the plinkysynth/plinky_public repository on GitHub. It is a 4-layer board of 121.9 × 109.2 mm with 300 parts on 266 nets, routed with 3,249 tracks and 432 vias.
It is built around the STM32L476VGT6, TL072 and W25Q32JVSSIQ, with the TPS61040DBV, LM1117-3.3 and TYPE-C-31-M-14 among its other parts. Its parts include 126 resistors, 78 capacitors, 27 connectors, 23 ICs and 23 diodes. It belongs with the STM32 boards of this library.
an 8 voice touch synth - https://plinkysynth.com
Plinky started life as a hobby project that spiralled out of control, was sold for a while on Thonk as a kit, went out of stock during the post-covid chip shortage, and was then rescued by various wonderful people in the Plinky community. Alogn the way, it got open sourced - both hardware and software. You are in the right place for that!
You can see that the software has largely been stagnant since original release; however in early 2025, a hero by the name of RJ stepped up and contributed some incredible improvements, rewriting large parts of the Sequencer and MIDI implementation. Plinky as of version 0.B0 (to be released shortly at the time of writing) is going to be by far the best version of plinky Ever, by far. HUGE thanks to RJ for really pushing plinky closer to its full potential.
Release Notes are available in the Release Notes document for the newer firmware versions.
If you want to get in on the action, join the Plinky Discord (see details at plinkysynth.com and check out the #beta-firwmare channel) or check out the sw/ folder here. Special shout out to @whocano in that channel who beta-tested the new fixes from RJ. See, plinky is a team effort? It is truly a special community. Thankyou from the bottom of my heart.
But plinky is not just software; It's a physical thing!
Many thanks to the people who worked so hard to make opensource plinky a reality, far better than the original version (V1) and (V2) that I stumbled through creating. V3 was a product of the Plinky Discord community, especially:
If you contributed to the open source hardware and I forgot you, please shout at me @mmalex on the Plinky Discord. Thanks to all the Plinky Discord members for making Plinky ever better!
Although this repo is all about the OSS Plinky, it is, as ever, available from Thonk in both prebuilt and kit form, and from other retailers including Schneidersladen. Thanks to MakingSoundMachines and LPZW Modules for manufacturing those for people who are not looking for the full OSS experience :)
For posterity, here is what I wrote at Stijn's coffee table as I released plinky into the public, not knowing what would become of it....
I apologise, its been so long since I looked at this, I am releasing a snapshot of what I had on my harddrive after a couple of years of barely being touched. while I am not actively developing plinky, I hope that by open sourcing it I can stimulate the wonderful community who collaborate on the plinky discord. I also hope to help iterate on some of the more obvious bugs, both hardware and software.
If you are interested in plinky, please feel free to join our discord community. More information at https://plinkysynth.com
Please refer to the license for information including stuff about derived works.
please see CONTRIBUTING.md for information on contributing to this project.
UPDATE Jan 2025 it is now possible to build and debug plinky using the arm-cortex-debug extension in VSCode. notes continue below:
you need STM32 cube ide, its basically the default project so most of the code is in /sw/Core/Src, most of the rest of the /sw folder is just the usual auto generated boilerplate mess.
It would be a useful project to update the firmware to build with a more minimal setup; the only significant middleware used relates to USB; while I lean on the STM default project a little, I imagine that the peripheral code could be modified fairly easily.
it should also compile as an emulator for mac and windows, using portaudio and dear imgui. it also compiles for wasm, somehow... I imagine that following the path of the WASM emulator, it would be relatively easy to port plinky to software plugin type platforms.
there is also a bootloader project... I forget exactly how it relates to the final build process. Consider that a TODO to document :)
the hardware is mostly in the hw/ folder, but I was new to kicad so I am not sure if all the library stuff is in the right place.
if there is something missing or something in there that you think shouldn't be in there, let me know and I can sort it out
Many thanks to the plinky community, who have helped plinky evolve and kept the dream alive over a few years.
Cheers all!
-- mmalex
| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C11, C16, C17, C18, C19, C22, C23, C25, C28, C35, C36, C37, C40, C41, C50 +16 |
| 29 | 100R | Resistor_SMD:R_0402_1005Metric | R34, R35, R40, R41, R57, R68, R69, R70, R120, R121, R122, R123, R124, R125, R126, R127 +13 |
| 23 | 10k | Resistor_SMD:R_0402_1005Metric | R6, R13, R23, R28, R37, R43, R44, R45, R47, R48, R49, R56, R66, R67, R83, R118 +7 |
| 16 | 4.7n | Capacitor_SMD:C_0603_1608Metric | C5, C6, C7, C8, C38, C39, C44, C45, C46, C47, C48, C49, C60, C61, C62, C63 |
| 16 | AudioJack2_SwitchT | hw:thonk_with_3d | J1, J2, J3, J4, J6, J7, J8, J9, J10, J11, J14, J15, J16, J17, J22, J23 |
| 14 | 100k | Resistor_SMD:R_0402_1005Metric | R1, R3, R4, R5, R8, R22, R26, R27, R32, R33, R36, R103, R104, R119 |
| 10 | 10u | Capacitor_SMD:C_0805_2012Metric | C2, C9, C10, C26, C30, C66, C67, C71, C72, C79 |
| 10 | 47R | Resistor_SMD:R_0603_1608Metric | R58, R59, R60, R61, R62, R63, R64, R65, R111, R112 |
| 10 | D_Schottky | Diode_SMD:D_SMA | D1, D2, D3, D5, D6, D7, D8, D9, D10, D11 |
| 9 | 1k | Resistor_SMD:R_0603_1608Metric | R20, R21, R52, R53, R54, R55, R91, R92, R110 |
| 9 | 22k | Resistor_SMD:R_0402_1005Metric | R10, R11, R12, R30, R31, R42, R46, R85, R86 |
| 9 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | T_12V-1, T_12V+1, T_AUDIOL1, T_AUDIOR1, T_JTCK1, T_JTMS1, T_NRST1, T_VBUS1, TPDEBUG1 |
| 8 | 1N4148WS | Diode_SMD:D_SOD-323 | D14, D15, D16, D17, D18, D19, D20, D21 |
| 7 | 33k | Resistor_SMD:R_0402_1005Metric | R9, R14, R15, R18, R19, R50, R51 |
| 7 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C3, C24, C27, C29, C31, C32, C33 |
| 6 | PJ313 | hw:AUDIO-TH_PJ-313_5JCJ | J28, J29, J30, J31, J32, J33 |
| 6 | TL072 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5, U7, U10, U11, U16, U18 |
| 5 | 2.2k | Resistor_SMD:R_0603_1608Metric | R29, R38, R39, R97, R100 |
| 5 | 5.1K | Resistor_SMD:R_0402_1005Metric | R105, R114, R115, R116, R117 |
| 4 | 1.5M | Resistor_SMD:R_0603_1608Metric | R2, R94, R95, R96 |
| 4 | 220p | Capacitor_SMD:C_0603_1608Metric | C20, C21, C75, C76 |
| 3 | 18p | Capacitor_SMD:C_0603_1608Metric | C12, C14, C65 |
| 3 | 1N5819WS | Diode_SMD:D_SOD-323_HandSoldering | D4, D13, D22 |
| 3 | 1u | Capacitor_SMD:C_0402_1005Metric | C4, C34, C54 |
| 3 | 220R | Resistor_SMD:R_0603_1608Metric | R108, R109, R113 |
| 3 | MCP6002-xSN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U8, U9 |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H4 |
| 3 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP2, JP3, JP4 |
| 2 | 100k | hw:pot3d | RV1, RV2 |
| 2 | 12k | Resistor_SMD:R_0402_1005Metric | R101, R102 |
| 2 | 200k | Resistor_SMD:R_0603_1608Metric | R7, R25 |
| 2 | 220u | Capacitor_SMD:CP_Elec_6.3x5.9 | C42, C43 |
| 2 | 5.6k | Resistor_SMD:R_0603_1608Metric | R16, R17 |
| 2 | Conn_02x08_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_Vertical_SMD | J12, J13 |
| 2 | LM1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2, U3 |
| 2 | TYPE-C-31-M-14 | hw:HRO_TYPE-C-31-M-12 | U19, U20 |
| 2 | W25Q32JVSS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U12, U14 |
| 2 | WE-TVS-824001 | Package_TO_SOT_SMD:SOT-23-6 | U15, U23 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C55 |
| 1 | 10uH | Inductor_SMD:L_Murata_LQH55DN_5.7x5.0mm | L1 |
| 1 | 470R | Resistor_SMD:R_0603_1608Metric | R107 |
| 1 | 8.2k | Resistor_SMD:R_0603_1608Metric | R24 |
| 1 | BLUE | LED_SMD:LED_0603_1608Metric | D23 |
| 1 | Conn_01x16_Female | Connector_IDC:IDC-Header_2x08_P2.54mm_Horizontal | J25 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y1 |
| 1 | Euro power | Connector_IDC:IDC-Header_2x08_P2.54mm_Horizontal | JP1 |
| 1 | Ferrite_Bead_Small | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | HCPL-0631-500E | Package_SO:SSOP-8_3.9x5.05mm_P1.27mm | U21 |
| 1 | LIS2DH12 | Package_LGA:LGA-12_2x2mm_P0.5mm | U17 |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | PEC11R-4215F-S0024 | hw:pec11r_encoder | MT1 |
| 1 | PI3USB102EZLE | hw:DIODES_X_QFN10 | U22 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D12 |
| 1 | STM32L476VGT6 | Package_QFP:LQFP-100_14x14mm_P0.5mm | U4 |
| 1 | SWD header | Connector_PinHeader_1.27mm:PinHeader_2x07_P1.27mm_Vertical_SMD | J5 |
| 1 | TPS61040DBV | Package_TO_SOT_SMD:SOT-23-5 | U13 |
| 1 | WM8758B | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U6 |
| 1 | oled0.91 | hw:oled091 | J20 |

plinkysynth/plinky_public
a public release of the plinky sw and hw




plinkysynth/plinky_public
a public release of the plinky sw and hw










xiaohail/pixl.js-oled
This project is open source and is solely for learning and research purposes, please do not use it for commercial purposes. Amiibo is a registered trademark of Nintendo, and NTAG21X is a registered trademark of NXP.
It measures 121.9 × 109.2 mm and has 4 copper layers, 1.6 mm thick.
300 parts, built around the STM32L476VGT6, TL072, W25Q32JVSSIQ and TPS61040DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the plinkysynth/plinky_public repository on GitHub, at the commit this page was made from: the board is hw/plinkyblack/plinkyblack_hwmidi_jacks.kicad_pcb and its schematic hw/archived/WIP_inputfix/plinkyblack.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask plinkysynth before reusing the design.