2 layers
2 layers55.9 × 56.1 mm
Multi
rocket3989/KiCad4personal kicad file storage
- Size
- 55.9 × 56.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 40
- Pads
- 110
- Tracks, vias
- 185, 11
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 30 Nov 2017
- Updated
- 8 Dec 2018
Overview
Multi is an open-source printed circuit board by rocket3989, from the rocket3989/KiCad repository on GitHub. It is a 2-layer board of 55.9 × 56.1 mm with 40 parts on 40 nets, routed with 185 tracks and 11 vias.
It is built around the ATTINY85-15M. Its parts include 8 resistors, 8 diodes, 2 connectors, 2 switches and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | LED | LEDs:LED_0805_HandSoldering | D3, D4, D5, D6, D7, D8, D9, D10 |
| 8 | R | Resistors_SMD:R_0805_HandSoldering | R5, R6, R7, R8, R9, R10, R11, R12 |
| 4 | Conn_01x02 | Socket_Strips:Socket_Strip_Straight_1x02_Pitch2.54mm | - +, J3, J5, MOTOR |
| 4 | R | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | 1k, 100k, R LED, R LED |
| 2 | Conn_01x08 | Socket_Strips:Socket_Strip_Straight_1x08_Pitch2.54mm | J4, J6 |
| 2 | LED | LEDs:LED_D5.0mm | LED, LED |
| 1 | 2N2219 | TO_SOT_Packages_THT:TO-92_Molded_Wide | TRANS. |
| 1 | ATTINY85 | rocketlib:ATTINY85 | U1 |
| 1 | C | Capacitors_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C |
| 1 | CP | Capacitors_THT:CP_Radial_D7.5mm_P2.50mm | 10uF |
| 1 | LEDStrip | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | Strip |
| 1 | LM555 | Housings_DIP:DIP-8_W7.62mm_Socket_LongPads | 555 |
| 1 | POT | Potentiometers:Potentiometer_Piher_T16H_Single_Vertical | POT |
| 1 | POT | Potentiometers:Potentiometer_Trimmer_ACP_CA6v_Horizontal | RV2 |
| 1 | SW_Push | Buttons_Switches_THT:SW_PUSH_6mm | SW1 |
| 1 | SW_SPDT | rocketlib:Switch | SW2 |
The 38 most common of 40 parts.
Questions
How big is the Multi PCB?
It measures 55.9 × 56.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Multi use?
40 parts, built around the ATTINY85-15M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Multi KiCad files?
From the rocket3989/KiCad repository on GitHub, at the commit this page was made from: the board is old/multi/multi.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Multi design in my own project?
Its repository states no licence, so its author keeps all rights: ask rocket3989 before reusing the design.
More from rocket3989/KiCad
12- 2 layers198.9 × 100 mm
- 2 layers86.5 × 57.9 mm
- 2 layers68.1 × 57.9 mm
- 2 layers100 × 100 mm
- 2 layers30.5 × 31.5 mm
- 2 layers59.1 × 31.6 mm
- 2 layers39.9 × 35.9 mm
- 2 layers36.3 × 30.2 mm
- 2 layers45.7 × 19.8 mm
- 2 layers27.9 × 30.4 mm
- 2 layers47.8 × 57.3 mm
Similar boards
- 2 layers50 × 50 mm
T85-with driver and poe
cnlohr/ethertiny
A firmware-only half-duplex 10Base-T implementation for AVRs
41 parts133 - 2 layers23 × 45 mm
- 2 layers41.1 × 110.7 mm
- 2 layers
- 2 layers40 × 30 mm
Test board
Guiimartinho/routeai
LLM-Powered Electronic Design Automation Platform for PCB Design
4 parts13 - 2 layers78.3 × 78.5 mm
50x70 tiny
rallekralle11/Tinyreflow
Inspired by afterearthltd's reflow plate, but using fewer and simpler components.
23 parts10 - 2 layers
MIDIMonkey
aleh/MIDIMonkey
Listens to MIDI messages on one pin and triggers drums on the others
8 parts9MIT - 2 layers46.9 × 41.4 mm
