2 layers
2 layers86.5 × 57.9 mm
Programing adaptor
rocket3989/KiCad4personal kicad file storage
- Size
- 86.5 × 57.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 44
- Pads
- 116
- Tracks, vias
- 134, 0
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 30 Nov 2017
- Updated
- 8 Dec 2018
Overview
Programing adaptor is an open-source printed circuit board by rocket3989, from the rocket3989/KiCad repository on GitHub. It is a 2-layer board of 86.5 × 57.9 mm with 31 parts on 44 nets, routed with 134 tracks and 0 vias.
It is built around the ATTINY85-20SU. Its parts include 2 connectors and 1 diode. It belongs with the ESP8266 and AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10k | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | 10k, 10k, 10k, 10k, 10k, 10k, 10k |
| 4 | 330 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | 330, R3, R4, R6 |
| 2 | 2N7000 | TO_SOT_Packages_THT:TO-92_Molded_Wide | Lvl Rx, Lvl Tx |
| 1 | .1uF | Capacitors_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | .1uf |
| 1 | 100uF | Capacitors_THT:CP_Radial_D8.0mm_P5.00mm | 100uF |
| 1 | 1uF | Capacitors_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | 1uF |
| 1 | ATTINY85-20SU | Housings_DIP:DIP-8_W7.62mm | ATTINY |
| 1 | Arduino_Nano | nano:Arduino_Nano | A1 |
| 1 | ERR | LEDs:LED_D5.0mm | ERR |
| 1 | ESP-01v090 | ESP8266:ESP-01 | ESP-01 |
| 1 | ESP/Serial | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | ATTINY |
| 1 | Flash | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | Flash |
| 1 | Flash | Buttons_Switches_THT:SW_PUSH_6mm | Flash |
| 1 | HB | LEDs:LED_D5.0mm | HB |
| 1 | LD1117S33TR_SOT223 | TO_SOT_Packages_THT:TO-220-3_Vertical | 3.3v |
| 1 | LED | LEDs:LED_D5.0mm | D1 |
| 1 | LED_test | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | LED PROG |
| 1 | PMODE | LEDs:LED_D5.0mm | PMODE |
| 1 | Reset | Buttons_Switches_THT:SW_PUSH_6mm | Reset |
| 1 | Serial 3.3v | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.00mm | J1 |
| 1 | Serial 5v | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.00mm | J2 |
Questions
How big is the Programing adaptor PCB?
It measures 86.5 × 57.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Programing adaptor use?
31 parts, built around the ATTINY85-20SU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Programing adaptor KiCad files?
From the rocket3989/KiCad repository on GitHub, at the commit this page was made from: the board is old/programing adaptor/programing adaptor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Programing adaptor design in my own project?
Its repository states no licence, so its author keeps all rights: ask rocket3989 before reusing the design.
More from rocket3989/KiCad
12- 2 layers55.9 × 56.1 mm
- 2 layers198.9 × 100 mm
- 2 layers68.1 × 57.9 mm
- 2 layers100 × 100 mm
- 2 layers30.5 × 31.5 mm
- 2 layers59.1 × 31.6 mm
- 2 layers39.9 × 35.9 mm
- 2 layers36.3 × 30.2 mm
- 2 layers45.7 × 19.8 mm
- 2 layers27.9 × 30.4 mm
- 2 layers47.8 × 57.3 mm
Similar boards
- 2 layers65 × 56.5 mm
SuperPower RPi KiCAD
SensorsIot/SuperPower
Here you should find the best power supplies for your low-power projects
122 parts600 - 2 layers18.8 × 8.1 mm
Dell charger emulator
KivApple/dell-charger-emulator
Emulator of original Dell charger using ATTINY85
6 parts154 - 2 layers14 × 17.3 mm
- 2 layers43.9 × 29 mm
C64Saver2-addon
bwack/C64-Saver-bwack
C64 Saver v1 and v2 - Overvoltage protection for the C64 and its power brick.
43 parts124 - 2 layers61 × 36.8 mm
- 2 layers200 × 100 mm
Regalodilara
valerionew/very-good-uc-doggos
A special graduation present for a special friend. Six microcontrollers in one devboard
91 parts50 - 2 layers134.3 × 140 mm
- 2 layers50 × 25 mm
LoRa Environmental Sensors
spielhuus/LoRa-Environmental-Sensors
ATtiny85 based LoRa atmospheric sensor board with BME280
5 parts28