2 layers27.2 × 23.5 mm
2 layers65 × 56.5 mm
SuperPower RPi KiCAD
SensorsIot/SuperPower600Here you should find the best power supplies for your low-power projects
- Size
- 65 × 56.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 122
- Nets
- 137
- Pads
- 488
- Tracks, vias
- 1,098, 153
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 Aug 2020
- Updated
- 1 Jul 2021
Overview
SuperPower RPi KiCAD is an open-source printed circuit board by SensorsIot, from the SensorsIot/SuperPower repository on GitHub. It is a 2-layer board of 65 × 56.5 mm with 122 parts on 137 nets, routed with 1,098 tracks and 153 vias.
It is built around the ATTINY85-20SU, BQ25895RTW and ME6210A33M3G, with the TPS61088RHL, 2N7002-7-F-ES and APA102-2020 among its other parts. Its parts include 35 capacitors, 27 resistors, 13 connectors, 8 diodes and 6 ICs. It belongs with the STM32 and AVR (ATmega, ATtiny) boards of this library.
Main components
6
ATTINY85-20SU
SOIC-8-208mil-40℃~+85℃ 10bit 2.7V~5.5V 20MHz 512Byte 512Byte 6 8 Bit 8KB AVR Built-in FLASH SOIC-8-208mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
BQ25895RTW
WQFN-24-EP(4x4)-40℃~+85℃ 1 12uA 3.9V~14V 4.608V 5A Charging IC I2C Lithium Battery Support Support QFN-24-EP(4x4) Battery Management ROHSTexas InstrumentsBattery Management
ME6210A33M3G
SOT23-3-25℃~+85℃ 1 1.6uA 10mV@(10mA) 18V 3.3V 500mA Fixed Positive Short Circuit Protection SOT23-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTPS61088RHL
UncategorisedTexas Instruments
2N7002-7-F-ES
SOT-23-55℃~+150℃ 1 N-channel 1.6V 1.85Ω@10V、2.05Ω@4.5V 1.8nC@4.5V 11pF 28pF 300mA 350mW 4pF 60V N-Channel SOT-23 MOSFETs ROHSElecSuperMOSFETs
APA102-2020
SMD-8P,2x2mmSMD-8P,2x2mm New Arrivals ROHSAdafruit IndustriesLight Emitting Diodes (LED)
README
README.mdSuperPower
Here you should find the best power supplies for your low-power projects. Because of different requirements for an Raspberry Pi and micro-controllers like the ESP32 we split the project into two boards, one for the Raspberry Pi (SuperPower-Rpi) and one for micro-controllers (SuperPower-uC) with low power.
SuperPower-Rpi for Raspberry Pi
SuperPower-uC for micro-controllers and low-power devices
Licence
All hardware designs and products you can find in this repository is licensed under CERN Open Hardware Licence Version 2 - Weakly Reciprocal
Relevant links
Parts
122| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100k | Resistor_SMD:R_0402_1005Metric | R2, R6, R9, R10, R11, R12, R16, R17, R18, R20, R21 |
| 10 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C6, C9, C23, C24, C29, C31, C33, C34, C35 |
| 8 | 22uF | Capacitor_SMD:C_1206_3216Metric | C2, C3, C5, C7, C10, C19, C27, C28 |
| 7 | 1.0uF | Capacitor_SMD:C_0402_1005Metric | C4, C8, C11, C14, C18, C26, C32 |
| 7 | DNP | Resistor_SMD:R_0603_1608Metric | R7, R15, R19, R22, R25, R26, R27 |
| 6 | DNP | TestPoint:TestPoint_Pad_1.0x1.0mm | TP3, TP4, TP5, TP6, TP7, TP8 |
| 5 | BZT585B13T-7 | Diode_SMD:D_SOD-523 | D1, D3, D4, D5, D6 |
| 4 | DNP | MountingHole:MountingHole_2.7mm_M2.5_ISO14580_Pad_TopBottom | H1, H2, H3, H4 |
| 4 | Jumper_NC_Small | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP9, JP10, JP11, JP12 |
| 4 | Q_PMOS_DMP3056L-7_SOT-23 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q7 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C17, C20, C21 |
| 3 | NC | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP2, JP3, JP4 |
| 2 | 1.8k | Resistor_SMD:R_0603_1608Metric | R13, R14 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C15, C22 |
| 2 | 47nF | Capacitor_SMD:C_0402_1005Metric | C12, C16 |
| 2 | DNP | Connector_Wire:SolderWire-1.5sqmm_1x01_D1.7mm_OD3.9mm | TP1, TP2 |
| 2 | DNP | LED_SMD:LED_0603_1608Metric | D2, D8 |
| 2 | DNP | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels | JP1, JP7 |
| 2 | Jumper_NO_Small | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP6, JP8 |
| 2 | Tact | Button_Switch_SMD:SW_Push_1P1T-SH_NO_CK_KMR2xxG | SW1, SW2 |
| 1 | 1.2uH | SuperPower-RPi-KiCAD:L_Sumida_CDMC8D28_9.5x8.7mm | L1 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C30 |
| 1 | 17.4k | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 2.2uH | Inductor_SMD:L_Vishay_IHLP-2525 | L2 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 255k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 2N7002-7-F | Package_TO_SOT_SMD:SOT-23 | Q6 |
| 1 | 30.1k | Resistor_SMD:R_0603_1608Metric | R24 |
| 1 | 324k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 4700pF | Capacitor_SMD:C_0402_1005Metric | C13 |
| 1 | 5.23k | Resistor_SMD:R_0603_1608Metric | R23 |
| 1 | APA102-2020 | LED_SMD:LED-APA102-2020 | D7 |
| 1 | ATtiny85-20SU | Package_SO:SOIJ-8_5.3x5.3mm_P1.27mm | U4 |
| 1 | BQ25895RTW | SuperPower-RPi-KiCAD:Texas_S-PWQFN-N24_EP2.7x2.7mm_ThermalVias | U2 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J10 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J13 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J8 |
| 1 | DNP | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J5 |
| 1 | DNP | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J12 |
| 1 | DNP | Capacitor_SMD:C_0603_1608Metric | C25 |
| 1 | DNP | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | J4 |
| 1 | DNP | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J3 |
| 1 | JST-PH | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J2 |
| 1 | Jumper_NC_Small | SuperPower-RPi-KiCAD:PinHeader_1x02_P2.54mm_Vertical_Shorted | JP5 |
| 1 | ME6210A33M3G | Package_TO_SOT_SMD:SOT-23 | U5 |
| 1 | NCP380HMU21AATBG | SuperPower-RPi-KiCAD:UDFN-6-1EP_2x2mm_P0.65mm_EP0.95x1.7mm | U6 |
| 1 | QWIIC_Connector | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J11 |
| 1 | Raspberry_Pi_2_3 | SuperPower-RPi-KiCAD:PinSocket_2x20_P2.54mm_Vertical_With_Pogo | J1 |
| 1 | STM32F412RETx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | TPS61088 | SuperPower-RPi-KiCAD:TI_VQFN_3.5x4.5mm | U1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J6 |
Questions
How big is the SuperPower RPi KiCAD PCB?
It measures 65 × 56.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SuperPower RPi KiCAD use?
122 parts, built around the ATTINY85-20SU, BQ25895RTW, ME6210A33M3G and TPS61088RHL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SuperPower RPi KiCAD KiCad files?
From the SensorsIot/SuperPower repository on GitHub, at the commit this page was made from: the board is SuperPower-RPi/SuperPower-RPi-KiCAD/SuperPower-RPi-KiCAD.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SuperPower RPi KiCAD design in my own project?
Its repository states no licence, so its author keeps all rights: ask SensorsIot before reusing the design.
Similar boards
- 2 layers191.5 × 76 mm
Pcb project
CrashOverride85/zc95
4 channel EStim box inspired by the mk312bt, with Lua scripting support
337 parts117GPL-3.0 - 4 layers42.8 × 36.8 mm
- 4 layers305 × 208.3 mm
- 2 layers70.8 × 23 mm
- 2 layers100 × 61 mm
Wgr
a5632645/final_design
simple digital waveguide synthesizer & simple mpe midi keyboard(pitch bend and pressure)
103 parts4 - 2 layers
XHP70 LED driver
powermax555/XHP70_driver
This is a small profile 17mm diameter PCB/circuit design intended to drive an XHP35,50,70 LED from a single lithium ion cell (18650, 20700, etc.)
23 parts2MIT - 4 layers55 × 55 mm
