2 layers65 × 56.5 mm
SuperPower RPi KiCAD
SensorsIot/SuperPower
Here you should find the best power supplies for your low-power projects
122 parts600
2 layers
XHP70 LED driver
powermax555/XHP70_driver2This is a small profile 17mm diameter PCB/circuit design intended to drive an XHP35,50,70 LED from a single lithium ion cell (18650, 20700, etc.)
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 30
- Pads
- 118
- Tracks, vias
- 190, 28
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Dec 2018
- Updated
- 2 Jan 2019
Overview
XHP70 LED driver is an open-source printed circuit board by powermax555, from the powermax555/XHP70_driver repository on GitHub, published under the MIT licence. It is a 2-layer board with 23 parts on 30 nets, routed with 190 tracks and 28 vias.
It is built around the TPS61088RHL. Its parts include 11 capacitors, 7 resistors, 3 ICs, 1 diode and 1 inductor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100k | Resistors_SMD:R_0402_NoSilk | R1, R2, R3, R4, R7 |
| 3 | 100n | Capacitors_SMD:C_0402 | C1, C3, C10 |
| 2 | 10u | Capacitors_SMD:C_0402 | C4, C9 |
| 1 | 100pF | Capacitors_SMD:C_0402 | C8 |
| 1 | 100u | Capacitors_SMD:C_1210 | C11 |
| 1 | 10n | Capacitors_SMD:C_0402 | C6 |
| 1 | 10u | Capacitors_SMD:C_1210 | C2 |
| 1 | 12m | Resistors_SMD:R_0805 | R6 |
| 1 | 3.3nF | Capacitors_SMD:C_0402 | C7 |
| 1 | 4.7u | Inductors_SMD:L_6.3x6.3_H3 | L1 |
| 1 | 47u | Capacitors_SMD:C_0805 | C5 |
| 1 | ATtiny816_(QFN20) | Housings_DFN_QFN:UQFN-20-1EP_3x3mm_Pitch0.4mm | U2 |
| 1 | D_Schottky | Diodes_SMD:D_SOD-523 | D1 |
| 1 | INA181 | TO_SOT_Packages_SMD:SOT-23-6 | U3 |
| 1 | R | Resistors_SMD:R_0402_NoSilk | R5 |
| 1 | TPS61088 | Misc:TPS61088 | U1 |
Questions
What parts does the XHP70 LED driver use?
23 parts, built around the TPS61088RHL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the XHP70 LED driver KiCad files?
From the powermax555/XHP70_driver repository on GitHub, at the commit this page was made from: the board is XHP70_LED_driver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the XHP70 LED driver design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers191.5 × 76 mm
Pcb project
CrashOverride85/zc95
4 channel EStim box inspired by the mk312bt, with Lua scripting support
337 parts117GPL-3.0 - 4 layers305 × 208.3 mm
- 4 layers55 × 55 mm
- 2 layers140 × 218 mm
Helio-485
GrizJW/helio-485
Helio-485 KiCad board: ESP32-C5, 2S 18650, solar input, 3.3 V, 12 V 2 A, RS-485 Modbus.
106 parts - 2 layers110 × 26 mm
Fan charger
Sirawit7205/led-fan-control
PCB for retrofitting a cheap rechargeable fan with LED lights
87 partsCERN-OHL-S-2.0 - 4 layers85 × 56 mm
- 2 layers101.3 × 39.9 mm
