
Most listener
Oleg-mk/MOST25-to-AUDIO
Passive MOST25 listener: Tang Nano 20K FPGA, ESP32 host, stereo I2S out with the head unit's volume, balance and tone

ch32v305fbp6 + es9018k2m usb UAC2.0 dac
HSDAC is an open-source printed circuit board by a5632645, from the a5632645/CH32V305-UAC2 repository on GitHub, published under the MIT licence. It is a 2-layer board of 70.8 × 23 mm with 98 parts on 78 nets, routed with 477 tracks and 78 vias.
It is built around the CH32V305FBP6, OPA1678ID and ES9018K2M, with the LP5907MFX-3.3 and ME6210A33M3G among its other parts. Its parts include 43 capacitors, 34 resistors, 7 ICs, 2 connectors and 1 diode. It belongs with the audio and music boards and the RISC-V boards of this library.
a usb-hs uac2 dac
[!NOTE] smartphone may not support feedback endpoint
just a toy, the clock will cause some buffer overflow
ch32v305fbp6 + es9018k2m + opa1678 + sgm8262
[!NOTE] you may want to change all the 10uf capacity footprint to 0805, because 0603 10uf may only have 10v version
and you may want to add more capacity for charge pump
Due to using inexpensive components, the clock has approximately a 200 Hz error. Additionally, the MCLK GPIO speed exceeds the maximum 50 MHz limit at 192 kHz.
If desired, you can use an external crystal for the I2S MCLK clock.
This dac only support 48k,96k,192k 32bits, dsd and other formats are not considered.
This DAC only supports high-speed connections.
You might hear some popping sounds during sudden high-load tasks.
Just flash HSDAC.elf to hardware. Don't use HID-Bootloader and dfu, they will be redoing in future.
there is a simple python tool that can adjust feedback clock
try it if audio underrun or overflow
Can someone redesign the hardware circuit?
CH32V307 UAC with external clock

| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 10uF | 1My_Footprint:C0603 | C3, C4, C7, C10, C12, C14, C15, C16, C27, C34, C37, C39, C40, C42 |
| 13 | 100nF | 1My_Footprint:C0603 | C5, C8, C9, C11, C13, C21, C28, C29, C30, C31, C32, C33, C38 |
| 6 | 10k | 1My_Footprint:R0603 | R1, R8, R18, R26, R30, R33 |
| 4 | 100pF | 1My_Footprint:C0603 | C22, C23, C24, C25 |
| 4 | 120R | PCM_Ferrite_SMD_Handsoldering_AKL:Ferrite_0603_1608Metric | FB1, FB2, FB3, FB4 |
| 4 | 13k | 1My_Footprint:R0603 | R9, R11, R20, R21 |
| 4 | 150pF | 1My_Footprint:C0603 | C17, C18, C19, C20 |
| 4 | 2.2uF | 1My_Footprint:C0603 | C6, C26, C41, C43 |
| 4 | 2k | 1My_Footprint:R0603 | R10, R12, R14, R16 |
| 4 | 3k | 1My_Footprint:R0603 | R13, R15, R22, R23 |
| 3 | 100 | 1My_Footprint:R0603 | R7, R24, R25 |
| 3 | 470 | 1My_Footprint:R0603 | R4, R5, R6 |
| 2 | 0 | 1My_Footprint:R0603 | R19, R34 |
| 2 | 100uF | Capacitor_SMD:CP_Elec_5x5.4 | C35, C36 |
| 2 | 12pF | 1My_Footprint:C0603 | C1, C2 |
| 2 | 4.7 | 1My_Footprint:R0603 | R31, R32 |
| 2 | 4.7k | 1My_Footprint:R0603 | R27, R28 |
| 2 | 5.1k | 1My_Footprint:R0603 | R2, R3 |
| 2 | OPA1678 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3, U4 |
| 2 | SGM3204YN6G_TR | footprint:SOT95P280X125-6N | PS1, PS2 |
| 2 | ~ | 1My_Footprint:PJ327A | PJ1, PJ2 |
| 1 | 18k | 1My_Footprint:R0603 | R29 |
| 1 | 1M | 1My_Footprint:R0603 | R17 |
| 1 | 500mA | PCM_Fuse_US_Handsoldering_AKL:Fuse_0603_1608Metric | F1 |
| 1 | 8M | PCM_Crystal_AKL:Crystal_SMD_3225-4Pin_3.2x2.5mm | X1 |
| 1 | CH32V305FBP6 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | ES9018K2M | footprint:QFN50P500X500X90-29N-D | IC1 |
| 1 | LP5907MFX-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | ME6210A33M3G | Package_TO_SOT_SMD:SOT-23 | U2 |
| 1 | Power | 1My_Footprint:LED.0603 | D3 |
| 1 | RST | 1My_Footprint:小龟轻触开关3_4_22.0MM | SW1 |
| 1 | SWD | Connector_JST:JST_GH_SM03B-GHS-TB_1x03-1MP_P1.25mm_Horizontal | J2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J3 |
| 1 | sgm8262 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7 |

Oleg-mk/MOST25-to-AUDIO
Passive MOST25 listener: Tang Nano 20K FPGA, ESP32 host, stereo I2S out with the head unit's volume, balance and tone





cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.


SensorsIot/SuperPower
Here you should find the best power supplies for your low-power projects
It measures 70.8 × 23 mm and has 2 copper layers, 1.6 mm thick.
98 parts, built around the CH32V305FBP6, OPA1678ID, ES9018K2M and LP5907MFX-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the a5632645/CH32V305-UAC2 repository on GitHub, at the commit this page was made from: the board is hardware_v2/HSDAC.kicad_pcb and its schematic hardware_v2/HSDAC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).