

WCH LinkE Mini
WCH-LinkE-Mini
- Size
- 38.1 × 15.2 mm
- Copper layers
- 2
- Thickness
- 1.69 mm
- Parts
- 41
- Nets
- 39
- Pads
- 131
- Tracks, vias
- 337, 38
- Pours
- 113
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 16 Sep 2024
- Updated
- 29 Oct 2026
Overview
WCH LinkE Mini is an open-source printed circuit board by 21km43, from the 21km43/WCH-LinkE-Mini repository on GitHub, published under the MIT licence. It is a 2-layer board of 38.1 × 15.2 mm with 41 parts on 39 nets, routed with 337 tracks and 38 vias.
It is built around the CH32V305FBP6, RT9080-33GJ5 and AO3401A, with the 1N5819WS and BSS138 among its other parts. Its parts include 18 resistors, 5 capacitors, 3 diodes, 3 transistors and 2 ICs. It belongs with the RISC-V boards of this library.
Main components
5CH32V305FBP6
TSSOP-20-175milTSSOP-20-175mil Microcontrollers (MCU/MPU/SOC) ROHSWCH (Nanjing Qinheng Microelectronics)Microcontrollers (MCU/MPU/SOC)RT9080-33GJ5
TSOT-23-5-40℃~+125℃@(Tj) 1 2uA 3.3V 360mV@(600mA) 42uVrms 5.5V 600mA 75dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSRichtek TechVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs1N5819WS
SOD-3231 Independent 1A 25A 40V 500uA@40V 600mV@1A SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky DiodesBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
README
README.mdWCH-LinkE-Mini
This project is compatible with WCH-LinkE.
Boards is optimized for JLCPCB (includes gerber, bom, cpl, and tooling holes). All components except the CH32V305, USB-C Connector, and 3.3V LDO are Basic Parts.
Requirements
LICENSE
Production files
Schematic and Board image
IDC Connectors are available here
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R10, R13, R14, R17, R18 |
| 4 | 100 | Resistor_SMD:R_0402_1005Metric | R1, R2, R5, R6 |
| 4 | 5.1k | Resistor_SMD:R_0402_1005Metric | R8, R9, R11, R12 |
| 4 | MountingHole | Tooling_Hole:Tooling_Hole | H1, H2, H3, H4 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C2, C4 |
| 2 | 22p | Capacitor_SMD:C_0402_1005Metric | C1, C3 |
| 2 | 270 | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | 330 | Resistor_SMD:R_0402_1005Metric | R15, R16 |
| 2 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | SW_Push | Switch:TS-1088-AR02016 | SW1, SW2 |
| 1 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 12M | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1N5819WS | Diode_SMD:D_SOD-323 | D3 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | CH32V305FBP6 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | Conn_02x05_Odd_Even | Connector:PinHeader_2x05_P2.54mm_Horizontal_SMD | J2 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | RT9080-33GJ5 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB:USB_C_Receptacle | J1 |
| 1 | WHITE | LED_SMD:LED_0603_1608Metric | D1 |
Similar boards
- 2 layers37.7 × 55 mm

- 2 layers59 × 31.5 mm

- 2 layers148 × 86.7 mm

Tune button panel
EdgeCoil/tune-button
BLE remote (ESP32-C3) that likes or playlists the current Spotify song through a companion Android app. Firmware, app, protocol and three PCBs: XIAO, four-key and JST-button.
246 parts - 2 layers80 × 90 mm

- 4 layers64 × 30 mm

- 2 layers36 × 38 mm

- 4 layers44.8 × 76 mm

- 2 layers70.8 × 23 mm

Questions
How big is the WCH LinkE Mini PCB?
It measures 38.1 × 15.2 mm and has 2 copper layers, 1.69 mm thick.
What parts does the WCH LinkE Mini use?
41 parts, built around the CH32V305FBP6, RT9080-33GJ5, AO3401A and 1N5819WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the WCH LinkE Mini KiCad files?
From the 21km43/WCH-LinkE-Mini repository on GitHub, at the commit this page was made from: the board is WCH-LinkE-Mini.kicad_pcb and its schematic WCH-LinkE-Mini.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the WCH LinkE Mini design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
