2 layers50 × 50 mm
T85-with driver and poe
cnlohr/ethertiny
A firmware-only half-duplex 10Base-T implementation for AVRs
41 parts133
ATTINY85-15M
Microchip TechnologyExtended
-40℃~+85℃ 16MHz 2.7V~5.5V 512Byte 512Byte 6 8 Bit 8KB AVR Built-in FLASH WQFN-20-EP(4x4) Microcontrollers (MCU/MPU/SOC) ROHS
- Part id
- microchip/ATTINY85-15M
- Category
- Microcontroller Units (MCUs, MPUs, SOCs)
- Package
- WQFN-20-EP(4x4)
- Pins
- 2
- In stock
- 0 at JLCPCB (C1338854)
- Used on
- 81 open-source boards
Overview
The ATTINY85-15M is a microcontroller Unit made by Microchip Technology in a WQFN-20-EP(4x4) package with 21 pins. -40℃~+85℃ 16MHz 2.7V~5.5V 512Byte 512Byte 6 8 Bit 8KB AVR Built-in FLASH WQFN-20-EP(4x4) Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:ATTINY85-15MT, from EasyEDA) and its footprint (EasyEDA_Cloud:WQFN-20_L4.0-W4.0-P0.50-TL-EP2.6, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C1338854). 81 open-source boards in 48 repositories on GitHub use it.
Symbol
Footprint
Pinout
21| Pin | Name | Type |
|---|---|---|
| 1 | (PCINT5/RESET#)PB5 | Unspecified |
| 2 | (PCINT3/ADC3)PB3 | Unspecified |
| 3 | DNC | Unspecified |
| 4 | DNC | Unspecified |
| 5 | (PCINT4/ADC2)PB4 | Unspecified |
| 6 | DNC | Unspecified |
| 7 | DNC | Unspecified |
| 8 | DNC | Unspecified |
| 9 | DNC | Unspecified |
| 10 | DNC | Unspecified |
| 11 | PB0(MOSI/SDA) | Unspecified |
| 12 | PB1(MISO/DO) | Unspecified |
| 13 | DNC | Unspecified |
| 14 | PB2(SCK/SCL) | Unspecified |
| 15 | VCC | Unspecified |
| 16 | DNC | Unspecified |
| 17 | DNC | Unspecified |
| 18 | DNC | Unspecified |
| 19 | DNC | Unspecified |
| 20 | DNC | Unspecified |
| 21 | EP | Unspecified |
- 2 layers23 × 45 mm
- 2 layers41.1 × 110.7 mm
- 2 layers
- 2 layers40 × 30 mm
Test board
Guiimartinho/routeai
LLM-Powered Electronic Design Automation Platform for PCB Design
4 parts13 - 2 layers78.3 × 78.5 mm
50x70 tiny
rallekralle11/Tinyreflow
Inspired by afterearthltd's reflow plate, but using fewer and simpler components.
23 parts10 - 2 layers
MIDIMonkey
aleh/MIDIMonkey
Listens to MIDI messages on one pin and triggers drums on the others
8 parts9MIT - 2 layers46.9 × 41.4 mm
Questions
Is there a KiCad symbol and footprint for the ATTINY85-15M?
Yes. The symbol is EasyEDA_Cloud:ATTINY85-15MT and the footprint EasyEDA_Cloud:WQFN-20_L4.0-W4.0-P0.50-TL-EP2.6, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the ATTINY85-15M?
WQFN-20-EP(4x4), with 21 pins. Its footprint is drawn on this page.
Where is the ATTINY85-15M datasheet?
Microchip Technology publishes it: the Datasheet link on this page opens it.
Where can I order the ATTINY85-15M?
JLCPCB lists it as part C1338854, with 0 in stock; the sellers' links on this page open their listings.
Which open-source boards use the ATTINY85-15M?
81 boards in 48 repositories on GitHub; the most starred are listed on this page, with their KiCad files.