2 layers50 × 50 mm
T85-with driver and poe
cnlohr/ethertiny
A firmware-only half-duplex 10Base-T implementation for AVRs
41 parts133
2 layers
MIDIMonkey
aleh/MIDIMonkey9Listens to MIDI messages on one pin and triggers drums on the others
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 22
- Pads
- 47
- Tracks, vias
- 41, 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 1 May 2018
- Updated
- 1 May 2018
Overview
MIDIMonkey is an open-source printed circuit board by aleh, from the aleh/MIDIMonkey repository on GitHub, published under the MIT licence. It is a 2-layer board with 8 parts on 22 nets, routed with 41 tracks and 2 vias.
It is built around the ATTINY85-15M. Its parts include 3 resistors, 3 connectors and 2 ICs. It belongs with the audio and music boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdMIDIMonkey
Listens to MIDI messages on one pin and triggers drums on the other pins (4 or 5 pins for ATtiny85).
I needed this when making analogue drums loosely following this schematics from Delptronics. I did not want to make a hardware sequencer, so opted to making a simple MIDI input instead.
The code is for ATtiny85, but should work on any Arduino. (For ATtiny85 you can use "Digispark (8mhz - no USB)" board in the Arduino IDE.)
Schematics
This one is for ATtiny85 but should be easy to apply to any Arduino.
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 1K | Resistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_Vertical | R2 |
| 1 | 200 | Resistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_Vertical | R1 |
| 1 | 5K1 | Resistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_Vertical | R3 |
| 1 | 6N138 | Housings_DIP:DIP-8_W7.62mm | U1 |
| 1 | ATtiny85 | Housings_DIP:DIP-8_W7.62mm | U2 |
| 1 | ISP | Aleh:PROTO_2x5 | J3 |
| 1 | MIDI IN | Aleh:PROTO_MIDI | J1 |
| 1 | OUTPUTS | Aleh:PROTO_8 | J2 |
Questions
What parts does the MIDIMonkey use?
8 parts, built around the ATTINY85-15M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MIDIMonkey KiCad files?
From the aleh/MIDIMonkey repository on GitHub, at the commit this page was made from: the board is kicad/MIDIMonkey.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MIDIMonkey design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers23 × 45 mm
- 2 layers41.1 × 110.7 mm
- 2 layers
- 2 layers40 × 30 mm
Test board
Guiimartinho/routeai
LLM-Powered Electronic Design Automation Platform for PCB Design
4 parts13 - 2 layers78.3 × 78.5 mm
50x70 tiny
rallekralle11/Tinyreflow
Inspired by afterearthltd's reflow plate, but using fewer and simpler components.
23 parts10 - 2 layers46.9 × 41.4 mm
- 2 layers50.2 × 31.1 mm
