
LPC176x MultiFunction
RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading
YardBoss is an open-source printed circuit board by RobertPHeller, from the RobertPHeller/RPi-RRCircuits repository on GitHub. It is a 2-layer board of 160 × 73.7 mm with 95 parts on 95 nets, routed with 1,135 tracks and 194 vias.
It is built around the MCP2551-I/P, LM324N and 74AHCT00D, with the MCT6H, MCP2515-I and 1N5229B among its other parts. Its parts include 41 resistors, 13 capacitors, 11 connectors, 9 ICs and 6 diodes. It belongs with the ESP32 boards of this library.
This is a SMD variant of 16DriverOutputHAT.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 1K Ohms | R1 | R9, R10, R11, R12, R13, R14, R15, R69, R70, R71, R72, R73, R74, R75 |
| 9 | 10K Ohms | R1 | R1, R2, R3, R4, R58, R61, R62, R63, R64 |
| 8 | 470 Ohms | R1 | R16, R17, R18, R19, R76, R77, R78, R79 |
| 5 | .1 uf | C1 | C1, C9, C13, C14, C16 |
| 4 | 100 Ohms | R1 | R7, R8, R67, R68 |
| 4 | 1N4002 | D3 | D1, D2, D9, D10 |
| 4 | 270 Ohms | R1 | R5, R6, R65, R66 |
| 4 | MountingHole_2-5mm_RevA_Date21Jun2010 | MountingHole_2-5mm_RevA_Date21Jun2010 | MH, MH, MH, MH |
| 2 | 1N5229B | D3 | Z1, Z4 |
| 2 | 1uf 35V | C1V5 | C2, C17 |
| 2 | 22 pf | C1 | C8, C10 |
| 2 | 60 Ohms | R1 | R59, R60 |
| 2 | 74AHCT00 | DIP-14__300 | U1, U10 |
| 2 | LM324N | DIP-14__300 | U2, U11 |
| 2 | MCT6H | DIP-8__300 | IC1, IC4 |
| 2 | MPQ3725A | DIP-14__300 | Q1, Q5 |
| 2 | RJ45 | RJ45_8N-S | J3, J4 |
| 2 | SB240E | D3 | D7, D8 |
| 1 | #26 #16 #20 #21 GND | ScrewTerm_2.54-5 | P7 |
| 1 | + 12 Volts - | ScrewTerm2.54-2 | P8 |
| 1 | +3.3V #5 #6 #13 #19 | ScrewTerm_2.54-5 | P6 |
| 1 | - 12 Volts + | mors_2p | T10 |
| 1 | 0.33 uf | C1 | C11 |
| 1 | 10 uf | C1V5 | C7 |
| 1 | 15 uf | C1V7 | C12 |
| 1 | 16 MHz | HC-49V | X1 |
| 1 | 47 nf | C1 | C15 |
| 1 | CE0 | TESTPOINT | P1 |
| 1 | CE1 | TESTPOINT | P2 |
| 1 | CS | TESTPOINT | P3 |
| 1 | FQU5P20TU | TO-251-3 | Q4 |
| 1 | I2C Expansion | pin_socket_5-90 | P4 |
| 1 | LM78S05CV | LM78XXV | U9 |
| 1 | MCP2515 | DIP-18__300 | U7 |
| 1 | MCP2551 | DIP-8__300 | U8 |
| 1 | PS1A PS1C PS1B M1A M1B | ScrewTerm_2.54-5 | T1 |
| 1 | PS2A PS2C PS2B M2A M2B | ScrewTerm_2.54-5 | T2 |
| 1 | PS3A PS3C PS3B M3A M3B | ScrewTerm_2.54-5 | T11 |
| 1 | PS4A PS4C PS4B M4A M4B | ScrewTerm_2.54-5 | T12 |
| 1 | RPI_GPIO | vasch_strip_20x2 | J1 |
| 1 | Termination | PIN_ARRAY_2X2 | J2 |

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading


RobertPHeller/2ndGenLocoControlStand
Model 2nd Generation Diesel Locomotive Control Stand




sharst/metaldetector-shield
Hardware and Software for a custom build metaldetector + pressure sensing shield

WATonomous/interfacing-mono
repo for all firmware, ROS nodes, messages, and schematics to live

It measures 160 × 73.7 mm and has 2 copper layers, 1.6 mm thick.
95 parts, built around the MCP2551-I/P, LM324N, 74AHCT00D and MCT6H. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RobertPHeller/RPi-RRCircuits repository on GitHub, at the commit this page was made from: the board is YardBoss/YardBoss.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask RobertPHeller before reusing the design.