
Simple Curve Tracer
jakeson21/Small-KiCAD-Projects
Collection of one-off KiCAD projects

Collection of one-off KiCAD projects
MOSFET Load Switch is an open-source printed circuit board by jakeson21, from the jakeson21/Small-KiCAD-Projects repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 44.2 × 16.5 mm with 20 parts on 8 nets, routed with 76 tracks and 13 vias.
It is built around the DMG2301L and 1N5229B. Its parts include 5 connectors, 4 resistors, 4 transistors, 1 capacitor and 1 diode.
Collection of one-off KiCAD projects
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10 | Resistor_SMD:R_0805_2012Metric | R1, R3 |
| 2 | DMG2301L | Package_TO_SOT_SMD:SOT-723 | Q3, Q4 |
| 2 | DMG2301L | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 1N5229B | Diode_THT:D_T-1_P5.08mm_Horizontal | D1 |
| 1 | 200n | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 220K | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 47K | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | GND | Connector_Pin:Pin_D0.9mm_L10.0mm_W2.4mm_FlatFork | TP1 |
| 1 | MouseBite | ProjectLibrary:mouse-bite-1mm-3mm | B1 |
| 1 | PIN | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | PMOS_Plug | ProjectLibrary:PinHeader_2x05_P2.54mm_Vertical | J5 |
| 1 | PMOS_Socket | ProjectLibrary:PinSocket_2x05_P2.54mm_Vertical | J4 |
| 1 | POUT | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J3 |
| 1 | SW | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | J2 |
| 1 | VG | Connector_Pin:Pin_D0.9mm_L10.0mm_W2.4mm_FlatFork | TP4 |
| 1 | VOUT | Connector_Pin:Pin_D0.9mm_L10.0mm_W2.4mm_FlatFork | TP3 |
| 1 | VS | Connector_Pin:Pin_D0.9mm_L10.0mm_W2.4mm_FlatFork | TP2 |

jakeson21/Small-KiCAD-Projects
Collection of one-off KiCAD projects

jakeson21/Small-KiCAD-Projects
Collection of one-off KiCAD projects




jakeson21/Small-KiCAD-Projects
Collection of one-off KiCAD projects

jakeson21/Small-KiCAD-Projects
Collection of one-off KiCAD projects


jakeson21/Small-KiCAD-Projects
Collection of one-off KiCAD projects


jakeson21/Small-KiCAD-Projects
Collection of one-off KiCAD projects

jakeson21/Small-KiCAD-Projects
Collection of one-off KiCAD projects

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading




zeeblaze/Melodio-SelfMate
Your Ultimate Portable Music Companion For Home Automation.

PocketConcepts/Pocket_PSU
A variable current & voltage PSU with 3S lipo charging, balancing, and protection circuit using PPS.

NanoCodeBug/pawpet
A virtual pet using the atsamd21g and sharp memory lcd, runs off of 2xAAA for a couple of months. See PawPet on Hacakday.io for full gallery.

Horizon-Avionics/Horizon-H1
Building a fully open-source flight computer for amateur rocketry!
It measures 44.2 × 16.5 mm and has 4 copper layers, 1.6 mm thick.
20 parts, built around the DMG2301L and 1N5229B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jakeson21/Small-KiCAD-Projects repository on GitHub, at the commit this page was made from: the board is MOSFET_Load_Switch/MOSFET_Load_Switch.kicad_pcb and its schematic Dual_Sticks_With_Buttons/Dual_Sticks_With_Buttons.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).