
LPC176x MultiFunction
RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading
FullInterlockingPlantCANPower is an open-source printed circuit board by RobertPHeller, from the RobertPHeller/RPi-RRCircuits repository on GitHub. It is a 2-layer board of 185.4 × 73.7 mm with 155 parts on 202 nets, routed with 1,867 tracks and 319 vias.
It is built around the MCP2551-I/P, LM324N and MCP23017-E/SS, with the 74AHCT00D, MCP2515-I and MCT6H among its other parts. Its parts include 89 resistors, 15 capacitors, 11 connectors, 10 transistors and 8 ICs. It belongs with the ESP32 boards of this library.
This is a SMD variant of 16DriverOutputHAT.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 37 | 1K Ohms | R1 | R10, R11, R12, R13, R14, R15, R20, R21, R22, R23, R28, R29, R30, R36, R37, R38 +21 |
| 32 | 150 Ohms | R1 | R24, R25, R26, R27, R32, R33, R34, R35, R41, R42, R43, R44, R49, R50, R51, R52 +16 |
| 8 | 10K Ohms | R1 | R1, R2, R3, R4, R40, R73, R74, R87 |
| 8 | MPQ2222A | DIP-14__300 | Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9 |
| 6 | .1 uf | C1 | C1, C3, C6, C9, C13, C14 |
| 4 | 470 Ohms | R1 | R16, R17, R18, R19 |
| 4 | MountingHole_2-5mm_RevA_Date21Jun2010 | MountingHole_2-5mm_RevA_Date21Jun2010 | MH, MH, MH, MH |
| 2 | 100 Ohms | R1 | R7, R8 |
| 2 | 1N4002 | D3 | D1, D2 |
| 2 | 1k Ohms | R1 | R31, R64 |
| 2 | 22 pf | C1 | C8, C10 |
| 2 | 270 Ohms | R1 | R5, R6 |
| 2 | 60 Ohms | R1 | R88, R89 |
| 2 | MCP23017 | DIP-28__300 | U3, U4 |
| 2 | RJ45 | RJ45_8N-S | J3, J4 |
| 2 | SB240E | D3 | D3, D4 |
| 1 | #19 #29 #21 #26 GND | ScrewTerm_2.54-5 | P3 |
| 1 | #5 #6 #12 #13 #16 | ScrewTerm_2.54-5 | P2 |
| 1 | - 12 Volts + | mors_2p | T12 |
| 1 | - 12 Volts + | ScrewTerm2.54-2 | T3 |
| 1 | 0.33 uf | C1 | C11 |
| 1 | 10 uf | C1V5 | C7 |
| 1 | 10 uf, 50V | CP_Radial_D5.0mm_P2.00mm | C4 |
| 1 | 15 uf | C1V7 | C12 |
| 1 | 15 uf, 50V | CP_Radial_D5.0mm_P2.00mm | C5 |
| 1 | 16 MHz | HC-49V | X1 |
| 1 | 1N5229B | D3 | Z1 |
| 1 | 1uf 35V | C1V5 | C2 |
| 1 | 3.3V #4 #23 #24 #25 | ScrewTerm_2.54-5 | P1 |
| 1 | 47 nf | C1 | C15 |
| 1 | 74AHCT00 | DIP-14__300 | U1 |
| 1 | C H1L H2G H1R H2Y | ScrewTerm_2.54-5 | T9 |
| 1 | C H2L H1G H2R H1Y | ScrewTerm_2.54-5 | T4 |
| 1 | C H3L H4G H3R H4Y | ScrewTerm_2.54-5 | T11 |
| 1 | C H4L H3G H4R H3Y | ScrewTerm_2.54-5 | T6 |
| 1 | CE0 | TESTPOINT | P4 |
| 1 | CE1 | TESTPOINT | P5 |
| 1 | CS | TESTPOINT | P6 |
| 1 | FQU5P20TU | TO-251-3 | Q10 |
| 1 | H1Y H2R H1G H2L C | ScrewTerm_2.54-5 | T8 |
| 1 | H2Y H1R H2G H1L C | ScrewTerm_2.54-5 | T5 |
| 1 | H3Y H4R H3G H4L C | ScrewTerm_2.54-5 | T10 |
| 1 | H4Y H3R H4G H3L C | ScrewTerm_2.54-5 | T7 |
| 1 | INT | TESTPOINT | P7 |
| 1 | LM324N | DIP-14__300 | U2 |
| 1 | LM78S05CV | LM78XXV | U7 |
| 1 | MCP2515 | DIP-18__300 | U5 |
| 1 | MCP2551 | DIP-8__300 | U6 |
| 1 | MCT6H | DIP-8__300 | IC1 |
| 1 | MPQ3725A | DIP-14__300 | Q1 |
| 1 | PS1A PS1C PS1B M1A M1B | ScrewTerm_2.54-5 | T1 |
| 1 | PS2A PS2C PS2B M2A M2B | ScrewTerm_2.54-5 | T2 |
| 1 | RPI_GPIO | vasch_strip_20x2 | J1 |
| 1 | Termination | PIN_ARRAY_2X2 | J2 |

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading


RobertPHeller/2ndGenLocoControlStand
Model 2nd Generation Diesel Locomotive Control Stand




sharst/metaldetector-shield
Hardware and Software for a custom build metaldetector + pressure sensing shield

WATonomous/interfacing-mono
repo for all firmware, ROS nodes, messages, and schematics to live

It measures 185.4 × 73.7 mm and has 2 copper layers, 1.6 mm thick.
155 parts, built around the MCP2551-I/P, LM324N, MCP23017-E/SS and 74AHCT00D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RobertPHeller/RPi-RRCircuits repository on GitHub, at the commit this page was made from: the board is FullInterlockingPlantCANPower/FullInterlockingPlantCANPower.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask RobertPHeller before reusing the design.