Skip to the content
12345678

MCP2551-I/P

Microchip TechnologyExtended

-40℃~+85℃ 1Mbps 365uA 4.5V~5.5V 75mA CAN Transceiver PDIP-8 CAN Transceivers ROHS

Part id
microchip/MCP2551-I/P
Category
CAN Transceivers
Package
PDIP-8
Pins
8
In stock
50 at JLCPCB (C411627)
Used on
46 open-source boards

Overview

The MCP2551-I/P is a CAN Transceiver made by Microchip Technology in a PDIP-8 package with 8 pins. -40℃~+85℃ 1Mbps 365uA 4.5V~5.5V 75mA CAN Transceiver PDIP-8 CAN Transceivers ROHS.

PCBKit's library has its KiCad symbol (SparkFun-IC-Comms:MCP2551, from Eagle libraries) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 50 are in stock at JLCPCB (part C411627). 46 open-source boards in 32 repositories on GitHub use it.

Symbol

1TXD2VSS3VDD4RXD5VREF6CANL7CANH8RS
SparkFun-IC-Comms:MCP2551From Eagle libraries

Footprint

12345678
Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Pinout

8
The pins of the MCP2551-I/P
PinNameType
1TXDUnspecified
2VSSUnspecified
3VDDUnspecified
4RXDUnspecified
5VREFUnspecified
6CANLUnspecified
7CANHUnspecified
8RSUnspecified

Open-source boards using it

46See all 46
  • 2 layers105.4 × 67.6 mmCarpc, the printed circuit board in 3D

    Carpc

    festlv/carpc

    RaspberryPi based CarPC build, to replace stock Volvo navigation system

    51 parts55
  • 2 layers15.2 × 55.4 mmCANine V1.4, the printed circuit board in 3D

    CANine V1.4

    motionlayer/CANine

    Firmware, schematic and board drawings for the CANine USBC↔︎CAN adapter

    33 parts14MIT
  • 2 layers34.3 × 44.4 mmSss7modem, the printed circuit board in 3D

    Sss7modem

    seidenstrasse/sss7modem

    Modems and specifications for Seidenstrasse Signaling System 7

    37 parts8
  • 2 layers140 × 90 mmMetaldetector, the printed circuit board in 3D

    Metaldetector

    sharst/metaldetector-shield

    Hardware and Software for a custom build metaldetector + pressure sensing shield

    149 parts4LGPL-3.0
  • 4 layers50 × 29.5 mmRcReceiver, the printed circuit board in 3D

    RcReceiver

    bodri/RcReceiver

    Redundant SX1280 based RC Receiver board (KiCad)

    72 parts3
  • 2 layers49 × 27.5 mmHw11c, the printed circuit board in 3D

    Hw11c

    igkov/bcomp11hw

    BCOMP11 hardware project

    89 parts2MIT
  • 4 layers99.1 × 57.1 mmVehicleController, the printed circuit board in 3D

    VehicleController

    UNCAMotorsports/UNCAMotorsports-2017

    147 parts2MIT
  • 2 layers255.3 × 57.3 mmNixieCAN, the printed circuit board in 3D

    NixieCAN

    gumistor/nixie_on_can_pcb

    Six NIXIE display with CAN bus interface. Powered with step up regulator.

    100 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP2551-I/P?

Yes. The symbol is SparkFun-IC-Comms:MCP2551 and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP2551-I/P?

PDIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the MCP2551-I/P datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP2551-I/P?

JLCPCB lists it as part C411627, with 50 in stock; the sellers' links on this page open their listings.

What can replace the MCP2551-I/P?

Parts like it in the library: the HT82C251ANZ by HTCSEMI, the SIT82C251 by SIT, the MCP2561-E/P by Microchip Technology and the HX82C251-P by ZHHXDZ. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP2551-I/P?

46 boards in 32 repositories on GitHub; the most starred are listed on this page, with their KiCad files.