Skip to the content
12345678

MCP2561-E/P

Microchip TechnologyExtended

-40℃~+125℃ 1 15uA 1Mbps 4.5V~5.5V 45mA CAN Transceiver PDIP-8 CAN Transceivers ROHS

Part id
microchip/MCP2561-E/P
Category
CAN Transceivers
Package
PDIP-8
Pins
8
In stock
43 at JLCPCB (C640341)
Used on
13 open-source boards

Overview

The MCP2561-E/P is a CAN Transceiver made by Microchip Technology in a PDIP-8 package with 8 pins. -40℃~+125℃ 1 15uA 1Mbps 4.5V~5.5V 45mA CAN Transceiver PDIP-8 CAN Transceivers ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MCP2561FD-H_P, from EasyEDA) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 43 are in stock at JLCPCB (part C640341). 13 open-source boards in 11 repositories on GitHub use it.

Symbol

1TXD2VSS3VDD4RXD5SPLIT6CANL7CANH8STBY
EasyEDA_Cloud:MCP2561FD-H_PFrom EasyEDA

Footprint

12345678
Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Pinout

8
The pins of the MCP2561-E/P
PinNameType
1TXDUnspecified
2VSSUnspecified
3VDDUnspecified
4RXDUnspecified
5SPLITUnspecified
6CANLUnspecified
7CANHUnspecified
8STBYUnspecified

Open-source boards using it

13See all 13
  • 2 layers100 × 100 mmCANBuster, the printed circuit board in 3D

    CANBuster

    GBert/misc

    miscellaneous stuff / unsorted

    182 parts99
  • 2 layers47.6 × 36.8 mmAdapter, the printed circuit board in 3D

    Adapter

    araobp/can-bus

    CAN adapter to UART

    30 parts12GPL-3.0
  • 2 layers107.7 × 85.1 mmCcd can bridge, the printed circuit board in 3D

    Ccd can bridge

    xerootg/CAN-CCD_bus

    Implements a CAN translator to CCD via a Intersil CDP68HC68S1

    86 parts12
  • 4 layers72 × 78.5 mmDashSight Mezzanine Card, the printed circuit board in 3D

    DashSight Mezzanine Card

    DashSight/Pine64-Mezzanine-Card

    A PineA64 mezzanine card for adding support to communicate with a vehicle's OBD2 port, obtain GPS location and determine acceleration, designed in KiCAD

    88 parts3
  • 2 layers80 × 49 mmObd2, the printed circuit board in 3D

    Obd2

    kevinkrieger/CAN

    CAN repository containing my CAN project, kicad files, firmware, datasheets, references, etc.

    64 parts3
  • 2 layers24 × 27.9 mmCanankaFEC, the printed circuit board in 3D

    CanankaFEC

    medo64/CanankaFEC

    CAN bus framework expansion card.

    28 parts2MIT
  • 2 layers50 × 50 mmBoards.design lecture, the printed circuit board in 3D

    Boards.design lecture

    Gonke0606/Personal_production_circuit

    This repository is for my personal production of circuit.

    61 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP2561-E/P?

Yes. The symbol is EasyEDA_Cloud:MCP2561FD-H_P and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP2561-E/P?

PDIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the MCP2561-E/P datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP2561-E/P?

JLCPCB lists it as part C640341, with 43 in stock; the sellers' links on this page open their listings.

What can replace the MCP2561-E/P?

Parts like it in the library: the HT82C251ANZ by HTCSEMI, the SIT82C251 by SIT, the MCP2551-I/P by Microchip Technology and the HX82C251-P by ZHHXDZ. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP2561-E/P?

13 boards in 11 repositories on GitHub; the most starred are listed on this page, with their KiCad files.