

NixieCAN
Six NIXIE display with CAN bus interface. Powered with step up regulator.
- Size
- 255.3 × 57.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 100
- Nets
- 84
- Pads
- 337
- Tracks, vias
- 933, 126
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 25 Nov 2021
- Updated
- 25 Nov 2021
Overview
NixieCAN is an open-source printed circuit board by gumistor, from the gumistor/nixie_on_can_pcb repository on GitHub. It is a 2-layer board of 255.3 × 57.3 mm with 100 parts on 84 nets, routed with 933 tracks and 126 vias.
It is built around the PIC18F2480-I/SO, MCP2551-I/P and PMBTA42, with the BZV55C75, PMBTA92 and BC847 among its other parts. Its parts include 37 resistors, 25 transistors, 13 diodes, 12 capacitors and 3 ICs. It belongs with the lEDs and displays and interfaces and adapters boards and the PIC boards of this library.
Main components
8PIC18F2480-I/SO
SOIC-28-300mil-40℃~+85℃ 10bit 16KB 25 256Byte 4.2V~5.5V 40MHz 768Byte 8 Bit Built-in FLASH PIC SOIC-28-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)MCP2551-I/P
PDIP-8-40℃~+85℃ 1Mbps 365uA 4.5V~5.5V 75mA CAN Transceiver PDIP-8 CAN Transceivers ROHSMicrochip TechnologyCAN TransceiversPMBTA42
SOT-23-65℃~+150℃ 1 NPN 100mA 100nA 25 250mW 300V 500mV 50MHz 6V NPN SOT-23 Bipolar (BJT) ROHSNexperiaBipolar (BJT)BZV55C75
SOD-80C-65℃~+200℃ 1 Independent 255Ω 400mW 500Ω 50nA@53V 75V SOD-80C Zener Diodes ROHSEIC SemiconZener DiodesPMBTA92
SOT-23-65℃~+150℃ 1 PNP 100mA 250mW 250nA 300V 40 500mV 50MHz 5V PNP SOT-23 Bipolar (BJT) ROHSNexperiaBipolar (BJT)BC847
SOT-231 NPN 100MHz 100mA 100nA 110 200mW 45V 500mV 6V NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)RJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorisedUS1G
SMA-55℃~+150℃ 1 Independent 1.3V@1A 1A 30A 400V 50ns 5uA SMA Fast Recovery / High Efficiency Diodes ROHSShunYeFast Recovery / High Efficiency Diodes
README
README.mdnixie_on_can_pcb
Six NIXIE display with CAN bus interface. Powered with step up regulator.
Main controler: PIC18F2480 CAN transciever: MCP2551
PIC utylize PWM output to drive step-up regulator. Step-up regulator provides high voltage to lamps (over 100V!!). PIC uses multiplexing to light up digits.
Parts
100| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | PMBTA42 | SOT23 | Q1, Q3, Q5, Q6, Q7, Q8, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q18, Q20, Q22 +1 |
| 11 | BZV55C75 | SM1206POL | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11 |
| 11 | R | SM0805 | R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20 |
| 6 | 100k | SM0805 | R5, R8, R22, R25, R28, R31 |
| 6 | 10k/0,5W | SM1206 | R6, R9, R23, R26, R29, R32 |
| 6 | 470k | SM0805 | R4, R7, R21, R24, R27, R30 |
| 6 | LC513 | LC513_new_hole | V1, V2, V3, V4, V5, V6 |
| 6 | PMBTA92 | SOT23 | Q2, Q4, Q17, Q19, Q21, Q23 |
| 3 | 100n | SM0805 | C3, C5, C12 |
| 2 | 100R | SM0805 | R40, R43 |
| 2 | 10k | SM0805 | R1, R3 |
| 2 | 1k | SM0805 | R41, R42 |
| 2 | 22p | SM0805 | C1, C2 |
| 1 | 100n/250V | c_2225 | C10 |
| 1 | 100n/25V | SM1206 | C6 |
| 1 | 10MHz | Q_49U3HMS | X1 |
| 1 | 1u | SM1206 | C4 |
| 1 | 2k7 | SM0805 | R44 |
| 1 | 330n | SM0805 | C11 |
| 1 | 33u/250V | CP_10x12.5mm | C9 |
| 1 | 470p | SM1206 | C8 |
| 1 | 47k | SM0805 | R2 |
| 1 | 47u/25V | c_elec_6.3x7.7 | C7 |
| 1 | 560u | c_2225 | L1 |
| 1 | 7805 | TO263 | U3 |
| 1 | BC847 | SOT23 | Q24 |
| 1 | CONN_6 | PIN_ARRAY-6X1 | P1 |
| 1 | DIODE | SM1206 | D13 |
| 1 | IRF470S | sot404 | Q25 |
| 1 | MCP2551 | so-8 | U2 |
| 1 | PIC18F2480 | soic-28 | U1 |
| 1 | RJ45 | RJ45_8 | J2 |
| 1 | US1G | DO-214AA(SMB) | D12 |
Similar boards
- 4 layers134 × 33 mm

- 2 layers200 × 70 mm

- 2 layers67 × 25 mm

GeigerPower
MagnusKos/GeigerPower
Simple schematics with PCB for powering the Geiger-Muller tube SBM-20
43 parts1GPL-3.0 - 2 layers200 × 100 mm

Polykit x monosynth
polykit/polykit-x-monosynth
The Polykit X1 is a DIY semi-modular, analog, patchable synthesizer
167 parts94 - 2 layers180 × 50 mm

- 2 layers113 × 86.7 mm

SiC based Battery Disconnect
abhinav937/SiC-Based-Bi-Directional-Circuit-breaker
KiCad 7 PCB design files for E_Fuse
138 parts2 - 4 layers83.2 × 78.1 mm

- 2 layers42.7 × 62 mm

Questions
How big is the NixieCAN PCB?
It measures 255.3 × 57.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the NixieCAN use?
100 parts, built around the PIC18F2480-I/SO, MCP2551-I/P, PMBTA42 and BZV55C75. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NixieCAN KiCad files?
From the gumistor/nixie_on_can_pcb repository on GitHub, at the commit this page was made from: the board is nixieCAN.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the NixieCAN design in my own project?
Its repository states no licence, so its author keeps all rights: ask gumistor before reusing the design.