
LPC176x MultiFunction
RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading
16LEDDriver23017SMD is an open-source printed circuit board by RobertPHeller, from the RobertPHeller/RPi-RRCircuits repository on GitHub. It is a 2-layer board of 65 × 56 mm with 98 parts on 105 nets, routed with 807 tracks and 152 vias.
It is built around the MCP23017-E/SS and BC848. Its parts include 68 resistors, 16 transistors, 3 capacitors, 2 connectors and 1 IC. It belongs with the ESP32 boards of this library.
This is a SMD variant of 16DriverOutputHAT.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 10K | R_0805 | R1, R2, R3, R4, R10, R14, R18, R22, R26, R30, R34, R38, R42, R46, R50, R54 +4 |
| 16 | 150 | R_0805 | R8, R12, R16, R20, R24, R28, R32, R36, R40, R44, R48, R52, R56, R60, R64, R68 |
| 16 | 15K | R_0805 | R5, R9, R13, R17, R21, R25, R29, R33, R37, R41, R45, R49, R53, R57, R61, R65 |
| 16 | 2K | R_0805 | R7, R11, R15, R19, R23, R27, R31, R35, R39, R43, R47, R51, R55, R59, R63, R67 |
| 16 | BC848 | sc70-6 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14, Q15, Q16 |
| 4 | RPi_Hat:RPi_Hat_Mounting_Hole | H1, H2, H3, H4 | |
| 1 | DWSLogoBCU | ||
| 1 | .1 uF | c_0805 | C1 |
| 1 | 10 uf 35V | c_elec_5x5.3 | C2 |
| 1 | 15 uF 35V | c_elec_5x5.3 | C3 |
| 1 | Address | pin_array_3x2 | J1 |
| 1 | Cathodes | ScrewTerm254_2 | T3 |
| 1 | LED 1 to 8 | ScrewTerm254-8 | T1 |
| 1 | LED 9 to 16 | ScrewTerm254-8 | T2 |
| 1 | MCP23017 | SO28 | U1 |
| 1 | RPi_GPIO | RPi_Hat:Pin_Header_Straight_2x20 | J0 |

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading


benjiaomodular/MiniOSC
A schmitt-trigger inverter based sawtooth and pulse oscillator module

mpfisher69/R2R-Bluetooth-Remote
An open source repository of Bluetooth Remote Controller for Reel-to-Reel tape recorders and vintage cassette decks.

jbtronics/FTController
A Motor controller for Fischertechnik with many cool features.



moyamartin/bms_hardware
This is the hardware design section of the BMS project. It was designed with KiCAD.

YuriySm/Ikoka-NanoX-Meshtastic-Device
Small 1W LoRA on Seeed Studio XIAO nRF52840 PCB for Meshtastic (fork of Ikoka Nano)
It measures 65 × 56 mm and has 2 copper layers, 1.6 mm thick.
98 parts, built around the MCP23017-E/SS and BC848. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RobertPHeller/RPi-RRCircuits repository on GitHub, at the commit this page was made from: the board is 16LEDDriver23017SMD/16LEDDriver23017SMD.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask RobertPHeller before reusing the design.